User login

You are here

conference

Symposium on Characterization and Modeling of Time-Dependent Materials and Processes at the 2007 ASME M&M Conference

The Symposium on Characterization and Modeling of Time-Dependent Materials and Processes at the 2007 ASME Mechanics and Materials conference will be held June 3-7, 2007, at the University of Texas at Austin. Additional information about the conference can be found at the conference website.

Papers dealing with modeling and experimental aspects of the subject area, involving all materials, are sought. The mechanical response should be non-negligable in cases involving non-mechanical fields. Possible topics include, but are not limited to: characterization and modeling of behavior at multiple scales; viscoelasticity, viscoplasticity; transport, chemically and electronically active processes; multiphase and biomaterial systems; thermodynamics; shape memory; mechanics of testing; micro/nanoindentation on time-dependent materials; dynamic behavior of polymers and composites; large deformations; residual stresses; time-dependent damage and failure; polycrystalline and single crystal behaviors; multifunctional materials; mechanics of processing.

Hanqing Jiang's picture

Symposium: Multiscale Multiphysics Modeling and Simulation of Nanomaterials and Nanostructures

McMat 2007, June 3-7, 2007, University of Texas at Austin

 

Call for paper

Symposium: Multiscale Multiphysics Modeling and Simulation of Nanomaterials and Nanostructures

The 2nd International Conference on Heterogeneous Material Mechanics (ICHMM-2008)

ICHMM 2008 seeks dissemination of recent, leading edge research results as well as in-depth discussions of future directions in the challenging subject of heterogeneous material mechanics. Sessions in the Huangshan International Hotel will focus on recent original research developments, while invited panel discussins in the subsequent Huangshan Mountain retreat aim to stimulate future research directions.

Co-Chairs

J. Fan, Alfred University, USA and Chongqing University

The topics of interest are:

Jie Wang's picture

The Eighth International Conference on Fundamentals of Fracture

The Eighth International Conference on Fundamentals of Fracture (ICFF VIII) is the successor of the previous seven held at NBS, Gaithersburg (USA, 1983), Gatlinburg (USA, 1985), Irsee (Germany, 1989), Urabandai (Japan, 1993), NIST, Gaithersburg (USA, 1997), Cirencester (UK, 2001), and Nancy (France, 2005). You are warmly invited to participate in ICFF VIII which will be held 3-7 January 2008 in Hong Kong University of Science and Technology, Hong Kong, and in Guangzhou, China. As the previous conferences, ICFF VIII provides an international forum for presentation and discussion of the latest scientific and technological development in fundamentals of fracture. The general theme of ICFF VIII is to cover all aspects of fracture at a fundamental level, including contributions from those working in the disciplines of Continuum Mechanics, Physics, Chemistry, Bioscience, Metallurgy, Ceramics, Polymer Science, etc. You are cordially invited to submit an abstract to join in this memorable event.

MichelleLOyen's picture

MRS Symposium: Mechanics of Biological and Bio-Inspired Materials

Symposium DD at the upcoming Materials Research Society Annual Meeting (Nov. 26-Dec. 1, Boston, MA) will be the latest in a series of MRS symposia on the mechanics of biological materials and materials designed following natural principles ("biomimetic" or "bio-inspired").   The full program is available at the MRS website (www.mrs.org).  This topic was also the subject of the August, 2006 focus issue of the Journal of Materials Research, which contained over 30 articles on the subject.

Tadayon's picture

15th Annual-International Conference on Mechanical Engineering, 15-17 May 2007, Iranian Society of Mechanical Engineers (ISME)

Introduction:

This is the Fifteenth Conference in Mechanical Engineering series that started in 1992. The conference is concerned with the latest in theoretical, mathematical and scientific developments in Mechanical Engineering as well as application of established techniques to new domains. Following tradition of conference, ISME 2007 will provide an international technical forum for experts and researches from both the academia and industry to meet and exchange new ideas and present their findings of ongoing research in various Mechanical engineering disciplines.

Xiaodong Li's picture

Symposium: Mechanics of Nanomaterials and Micro/Nanodevices-Experimental and Modeling, September 16-20, 2007, Detroit, Michigan

Although nanostructures, such as nanoparticles, nanotubes, nanowires, nanobelts, and nanometer thick films, nanostructured materials and nanocomposites have been synthesized and fabricated by various techniques, their mechanical properties have not been well explored. These nanostructures are being used as structural and functional building blocks to construct micro/nanodevices. Some nanostructured materials exhibit the breakdown of Hall-Petch behavior. The failure of conventional reinforcing models has been found in nanocomposites. The extremely small dimensions of nanomaterials and micro/nanodevices impose tremendous challenges to many existing experimental techniques and modeling tools. An in-depth understanding of mechanics at the nanoscale is greatly needed. Development of mechanical testing, and manipulation instruments and techniques, is also a technological necessity. This symposium will focus on research on mechanical properties of nanostructures, nanostructured materials and nanocomposites, and reliability testing of micro/nanodevices.

Zhigang Suo's picture

Applied Mechanics Division Committee Meetings in Chicago

Rui Huang's post early today reminded me of writing to all of you who are going to ASME meeting in Chicago, 5-10 November 2006, a short 10 days from today.

As I wrote in September, much of the initial planning for the next year's Congress will happen at the committee meetings this year. These meetings will formulate possible topics for symposiums in the next Congress. Surely you would like to see your favorite topics get picked.

Meetings of all Technical Committees are open to all. Please find the meeting times of the Technical Committees that interest you. You may also want to know who are the Chairs of the 17 Technical Committees in the Applied Mechanics Division.

Rui Huang's picture

ASME Technical Committee on Integrated Structures

In response to a proposal by Zhigang Suo in November 2005, the Executive Committee of the Applied Mechanics Division (AMD) of ASME has created a new Technical Committee on Integrated Structures. The main purpose is to provide a home at AMD for those who are working in the interdisciplinary areas involving applied mechanics and integrated materials/structures such as microelectronics and biomedical technologies. Read more here.

To forge the link between academia and industries, the committee will be co-chaired by industrial and academic members. For the first year, Jun He of Intel and Rui Huang (myself) have served as the co-chairs. As the 2006 ASME Congress (November 5-10) coming around the corner, we would like to draw your attention to our first activities at the congress.

Micro/Nano Forum at Chicago Hilton, November 8, 2006-ASME Conference 2006

Dear Fellow ASME Micro & Nano Professionals :

There still is time to participate in the "Micro & Nano Society-Wide Forum" which will be held on Wednesday, November 8th, 5-8 pm, Williford Room C at the Chicago Hilton and Towers during ASME's Congress 2006.

The intention of this program is to stimulate cross-disciplinary knowledge-exchange, networking and synergy among ASME Members and other professionals interested in the development of nanotechnology. We extended the submission due date to Oct. 25th. (Previous one was a too short notice.)

A complimentary light dinner along with beverages will be provided during the program. All you need is your poster which will be tacked onto a poster board that is 96 inches by 48 inches (2.4 m by 1.2 m).

Ji Wang's picture

Second Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (Spawda 2006)

Advances in the research of the theory of Piezoelectricity and Acoustic Waves have provided essential foundation and new opportunities to device technology and have been fostering academic exchanges and interaction in the piezoelectric device industry.With the increased research activities in piezoelectricity and acoustic waves and recent fast growth in piezoelectric devices, we are also facing many technological challenges from real engineering applications and product design and manufacturing.Following the successful SPAWDA 2004 in Ningbo, Chinese Society of Theoretical and Applied Mechanics, IEEE UFFC and the Acoustical Society of China have decided, also with industrial support, to hold the SPAWDA 2006 at Zhejiang University, Hangzhou, Zhejiang, China from December 14-17.The conference topics include, but not limited to,

Joost Vlassak's picture

COMPUTATIONAL METHODS FOR MICRO AND NANO SYSTEMS

Ninth U.S. National Congress on computational mechanics
July 22 -26, 2007. San Francisco, California

A mini-symposium on

COMPUTATIONAL METHODS FOR MICRO AND NANO SYSTEMS

Call for Papers
Micro and Nano Electro Mechanical Systems have recently attracted much attention from the industry and from the scientific community. MEMS are nowadays routinely met in various fields like in the automotive, aerospace and large consumer applications.
It can be said that for various micro systems the pioneering phase has been substituted by a phase of industrial applications. Hence, new challenges concerning reliability, optimization and increasing miniaturizations must be tackled by the designers. All these issues need a multi-disciplinary approach and must be supported by multi-physics numerical and experimental analyses able to contribute to the definition of a unified design and analysis methodology of MEMS and NEMS.

Xin-Lin Gao's picture

Symposium on "Mechanics of Nano-, Bio- and Cellular Materials" at the McMat 2007

CALL FOR PAPERS

The 2007 ASME Applied Mechanics and Materials Conference (McMat 2007)
Austin, Texas, June 3-7, 2007

http://www.ae.utexas.edu/MCMAT07/

Symposium on

Horacio Espinosa's picture

The 13th International Conference on Experimental Mechanics

Dear Colleagues:

The 13th International Conference on Experimental Mechanics (ICEM13, http://www.icem13.gr) will be held on July 1-6, 2007 in Alexandroupolis, Greece. It is our pleasure to announce that the Conference will include a special symposium organized by us entitled, “Plasticity, Fracture and Fatigue at the Micro and Nano Scales,” which will focus on recent developments in this area within the larger scope of assessing research needs in a variety of applications of interest.

Zhenyu Xue's picture

International Conference on Computational & Experimental Engineering and the Sciences (ICCES07)

http://icces.org/cgi-bin/ices07/pages/index 

The Aim of ICCES'07 is to bring researchers from the world's acdemia, industry, and the governments, for a few days, to the ambience of Miami, USA, in January 2007, to discuss the recent advances in computational and experimental engineering & sciences, and to facilitate collaborative research efforts.

The Main Themes of the Conference are:

1. Multidisciplinary Analysis & Synthesis of Complex Systems
2. Mechanics of Composite Materials and Structures
3. Plasticity; Steel Structures; Computational & Experimental Aspects
4. Mechanics of Fluids, Gases, and Fluidics/MEMS
5. Nanoengineering in Medicine and Biology
6. Computational Biology, Biomechanics
7. Geomechanics, Geomaterials
8. Smart Structures
9. Computational Fracture Mechanics; Structural Integrity & Health Monitoring
10. Nanomechanics, Nanostructured Materials, & Materials by Design
11. Dynamics of Materials & Structures: Computations & Experiments
12. Meshless and other novel methods of computer modeling in engineering and the sciences
13. Computational Solid Mechanics

If you are interested in organizing a special Symposium in one of the above themes, please contact the organizing committee at icces@icces.org

Ashkan Vaziri's picture

Mini-symposium on “Computational Methods in Impact Engineering” in Ninth U.S. National Congress on Computational Mechanics

The aim of the “Computational Methods in Impact Engineering” mini-symposium is to recognize the increasing role of the computation methods in Impact Engineering. It is now established that computational tools are indispensable to augment experimental techniques for the analysis of complex systems under dynamic loading. Many new computational techniques are currently being developed and new applications in the fields of impact and shock loadings are emerging. This mini-symposium will bring together engineers and scientists working in the area of Computational Impact Engineering.

Topics of interest include (but are not restricted to) the following:

Interesting Conference: "micro-TAS 2006"

The conference "micro-TAS" may be interesting to researchers in engineering and science, especially involving Bio-MEMS/NEMS, biophysics, and biochemistry. See details of this conference.

The Fourth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems

The Fourth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems will be held in Kunming, China, November 6–9, 2006.

http://sail.dlut.edu.cn/cjkosm4/Home/Index.htm

Recent advances of computer technology have given powerful practical tools to structural and mechanical designs. Optimal design is one of such area where various theories and methodologies are well developed. It is, however, lacking general interests among field designers and engineers. Innovative optimal design techniques and new applications are yet to be developed. Following the successful first CJK-OSM1 in Xian, China in 1999, second (CJK-OSM2) in Busan, Korea in 2002 and the third (CJK-OSM3) in Kanazawa, Japan in 2004, as agreed among participants in the symposium, the fourth CJK-OSM symposium will be held in Kunming, China during Nov. 6th -Nov. 9th, 2006. As before this will be a forum for exchange of recent research ideas and fostering new developments and new applications. Reflecting current interests from various fields, several new topics are included. The scope is, however, not limited to those listed.

Symposium on Mechanics in Biology and Medicine

This symposium will be part of the 2007 ASME Applied Mechanics and Materials Conference, to be held in the University of Texas in Austin, in June 3-6, 2007.

Student Presentation Competition at USNCCM IX

The 9th US National Congress on Computational Mechanics will feature a student presentation competition. This competition continues in the format pursued at the recent World Congress in Los Angeles. It is open to students who have an abstract accepted for presentation at the Congress.

19th Annual Melosh Competition at ETH Zurich

The 19th Annual Melosh Competition for the Best Student Paper on Finite Element Analysis will be held at ETH Zurich, on April 27, 2007.    The competition has become one of the premier graduate student events in the broad area of mechanics.   We have held the competition at a variety of locations over the past several years, but this is the first time it will be held outside the US.  We are presently seeking funds to provide travel fellowships for those students selected as finalists, as this represents an excellent opportunity for students to visit a world-class institution.  

Details on the competition and submission procedure can be found here.   The extended abstracts are due on January 8, 2007. I want to emphasize that the competition is really one on computational science.   As a result, papers on meshfree methods, molecular dynamics methods, their coupling with the FEM, etc., are welcome.   Please encourage your colleagues working in computational science to consider applying.  

Ravi-Chandar's picture

McMat 2007 Applied Mechanics and Materials Conference

The McMat 2007 conference, organized by the University of Texas on behalf of the Applied Mechanics and the Materials Divisions of the ASME, will be held in Austin, June 3-7, 2007.

We are now accepting proposals for symposia and abstracts of papers.

Ling Liu's picture

Ninth U.S. National Congress on Computational Mechanics

USNCCM IX, July 22 - 26, 2007
Pre- & Post-Congress Short Courses, July 22 & 26, 2007
Hyatt Regency San Francisco
San Francisco, California

BACKGROUND AND SCOPE
From their inception in 1991, the biennial congresses of the United States Association for Computational Mechanics have become major scientific events, drawing computational engineers and scientists worldwide from government, academia, and industry. The Ninth U.S. National Congress on Computational Mechanics (USNCCM IX), hosted by the University of California, Berkeley, will feature the latest developments in all aspects of computational mechanics, and will broaden the definition of the discipline to include many other computation-oriented areas in engineering and sciences. From applications in nanotechnology and bioengineering, to recent advances in numerical methods and high-performance computing, the technical program will reflect the Congress theme of "Interdisciplinary Computation''. In addition to plenary lectures and minisymposia that highlight the latest trends in computational mechanics, pre- and post-conference short courses addressing advances in multiscale and multiphysics methods, as well as other topics, will be held. Numerous vendor exhibits from Bay Area and national companies and organizations are also planned. Detailed information on USNCCM IX can be found at:
http://me.berkeley.edu/compmat/USACM/main.html

Pages

Subscribe to RSS - conference

Recent comments

More comments

Syndicate

Subscribe to Syndicate