User login

Navigation

You are here

3D printing

mshakiba's picture

Post-doctoral research associate and Graduate student openings

A postdoctoral and graduate student openings with the main focus on the mechanics of composites materials are available immediately in Shakiba's group. We are looking for strongly motivated candidates to work on an AFOSR supported project on 1) thermo-mechanical damage coupling in FRPs, 2) simulation of additively manufactured composites and 3) sensitivity and machine learning for damage predictions.

Postdoctoral Research Assistant - Czech Technical University in Prague

 

Postdoctoral Research Assistant in Computational Impact Dynamics for Automotive and Aerospace Applications

 

 

skumaar's picture

PhD Position in Composites and Additive Manufacturing at the University of Glasgow

The James Watt School of Engineering of the University of Glasgow is seeking a highly motivated graduate to undertake an exciting 3.5-year PhD project entitled, ‘multifunctional cellular composites enabled by 3D printing’. The objective of the project is to design additive manufacturing-enabled microarchitected composites with unprecedented properties optimized for location-specific structural and functional requirements for a multitude of applications. Experience and/or a strong interest in one or more of the following areas are

3D LifePrints: Producing 3D Anatomical Models for Surgical Planning and Training with Simpleware Software

3D printed anatomical model

Wed, May 27, 2020 12:00 PM - 1:00 PM BST

Join the Synopsys Simpleware team for a webinar with 3D LifePrints on the process of producing 3D anatomical models for surgical planning and training.

You can learn more about the event and how to take part here: https://bit.ly/3djk8qU

PhD vacancy (4 years) on topology optimization of large 3D printed structures with functionally graded materials

Arc welding based additive manufacturing or WAAM techniques are attracting interest from the manufacturing industry because of their potential to fabricate large metal components with low cost and short production lead time. This process exists alongside other high deposition rate metal AM technologies such as powder and wire based DED. While these use either laser or an electron beam as energy source to melt a metal powder or wire, WAAM technologies melt metal wire using an electric arc.

miquel.aguirre's picture

1 PhD position in Real time Solid Mechanics & 3D Printing - Marie Curie ITN project Meditate - ESR03

1 Early Stage Researcher (ESR) PhD position in biomechanics offered within the framework of the project MeDiTATe (The medical digital twin for aneurysm prevention and treatment) funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Actions (MSCA) Innovative Training Networks (ITN) with Grant Agreement No. 859836. MeDiTATe is a European Industrial Doctorate (EID).

Rashid K. Abu Al-Rub's picture

Postdoctoral Position Available in United Arab Emirates within the Advanced Digital & Additive Manufacturing (ADAM) Center

A postdoctoral fellow research position is availabe immediately in the Advanced Digital & Additive Manufacturing (ADAM) center at Khalifa University in Abu Dhabi in United Arab Emirates. The research project focuses on design for additive manufacturing (DfAM) with special emphasize on topology-optimization and generative deisgn of multi-functional materials, composites, and structural systems.

Lifeng Wang's picture

A fully funded PhD Position Available at Stony Brook University

One PhD position is available for Fall 2020 in the Department of Mechanical Engineering at Stony Brook University, New York Long Island. The research program focuses on the mechanics and design of novel advanced materials and metamaterials to achieve high mechanical performance, new wave propagation features, and multifunctional characteristics. The candidates with background in solid mechanics and finite element analysis are highly encouraged to apply. 

Rashid K. Abu Al-Rub's picture

Postdoctoral Position Available in United Arab Emirates within the Advanced Digital & Additive Manufacturing (ADAM) Center

A postdoctoral fellow research position is availabe immediately in the Advanced Digital & Additive Manufacturing (ADAM) center at Khalifa University in Abu Dhabi in United Arab Emirates. Applicants should demonstrate research capabilities in modeling, experimentation, and testing in the area of additive manufacturing (3D printing). Candidates with research experience related to sandwich panels will be considered with higher priority.

nassarh's picture

PhD and Postdoc positions in nonlinear structural mechanics

I am seeking enthusiastic students and recent graduates to join my group at the University of Missouri - Columbia to work on the nonlinear structural mechanics of folded and 3D printed materials such as origami tessellations and lattices. Positions are available at the level of Graduate Research Assistants and Postdoctoral Fellows. Candidates with background in nonlinear finite element analysis are particularly encouraged to apply.

ludovicnoels's picture

PhD & Post-doc positions in the context of “Data-driven Multi-scale Optimisation for Additive Manufacturing of fatigue resistant shock-absorbing MetaMaterials”

Context
As part of a collaborative FET-Open H2020 project between different universities and a SME, there exist open PhD and Post-Doc positions is the context of
• Experimental characterisation of SLS printed structures;
• Models development of SLS process and constitutive behaviours;
• Developments of homogenisation methods and surrogate models (e.g. machine learning etc.)

Crystal-inspired architected materials: Nature 565 (2019) & 3-year postdoc position at Imperial College London

We recently presented an original research that uses 3d printing to realise the mimicry of the microstructure observed in crystalline metals to employ crystals’ hardening mechanisms to develop robust and damage-tolerant architected materials (Nature 2019; 565:305 - https://www.nature.com/articles/s41586-018-0850-3).

Blog: Transforming MRI and CT scans into 3D Models

Being able to create accurate medical devices that are closely matched to a patient’s unique anatomy requires precision imaging, measurements, and design. A critical part of PrinterPrezz’s unique medifacturing™ workflow is our process of turning magnetic resonance imaging (MRI) and computed tomography (CT) scans into a 3D CAD image that can be manipulated and used for 3D printing.

Postdoctoral vacancy (3 years) on patient-specific design and finite element modelling of 3D printed medical implants

3D printing or Additive Manufacturing (AM) technologies carry the promise of revolutionizing the quality and efficiency of healthcare. However, the required technologies, even when available, are currently too fragmented to be integrated into routine, affordable and streamlined solutions that can benefit a large number of patients. The challenge thereby is to deliver 3D printing technologies that enable:

Xin Ning's picture

Postdoc Position in Flexible Electronics

POST-DOCTORAL SCHOLAR, PENN STATE:  The Advanced Structures Laboratory, Department of Aerospace Engineering at the Pennsylvania State University, University Park Campus invites applications for an appointment as a Postdoctoral Scholar.

 

Postdoctoral vacancy (3 years) on automated software workflow for medical application of 3D printed technologies

3D printing or Additive Manufacturing (AM) technologies carry the promise of revolutionizing the quality and efficiency of healthcare. However, the required technologies, even when available, are currently too fragmented to be integrated into routine, affordable and streamlined solutions that can benefit a large number of patients. The challenge thereby is to deliver 3D printing technologies that enable:

Postdoctoral vacancy (2 years) on high-frequency vibration techniques for non-destructive inspection of 3D printed metal parts

The use of 3D printed metal structures is taking a very fast ramp-up in industry. General Electric has demonstrated the possibility of printing titanium fuel injectors for their LEAP engine, EADS has printed a nacelle hinge bracket for the Airbus A320, Boeing is printing plastic inlet ducts for high-altitude aircrafts, hip implants and other prosthetics are exploiting the design freedom of additive manufacturing (AM),..

nassarh's picture

Fully Funded PhD Position on Mechanical Metamaterials at the University of Missouri, Columbia

The position: I am looking to support a PhD student to work with me towards the design, modeling, fabrication and testing of mechanical metamaterials with emphasis on morphing structures such as origami tessellations and lattice materials. The study will focus on deriving and validating novel stress-strain relationships that transcend the standard framework of Hook's law. Sought applications will be in the domains of (i) self-deploying space structures; (ii) soft robotics; and (iii) "invisibility" cloaks.

KevinGE's picture

Fast-Response, Stiffness-Tunable Soft Actuator by Hybrid Multimaterial 3D Printing

ttps://onlinelibrary.wiley.com/doi/full/10.1002/adfm.201806698

Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing

Yuan-Fang Zhang, Ningbin Zhang, Hardik Hingorani, Ningyuan Ding, Dong Wang, Chao Yuan, Biao Zhang, Guoying Gu,* and Qi Ge*

3D Medical Printing Webinar, Nov 14th 2018

3D Printed Anatomical Models: How Mediprint Leverage Synopsys and Stratasys Technology for Patient-specific Solutions

Wed, Nov 14, 2018 5:00 PM - 6:00 PM GMT

Yoonho Kim's picture

Untethered soft machines and robots enabled by hard-magnetic soft materials

We introduce our recent works on advanced fabrication and mechanics of hard-magnetic soft materials towards the development of untethered soft machines and robots actuated and controlled by magnetic fields. 

- Abstract

Pages

Subscribe to RSS - 3D printing

Recent comments

More comments

Syndicate

Subscribe to Syndicate