iMechanica - buoyancy
https://imechanica.org/taxonomy/term/2657
enHow to model the boat sailing on the water surface with springs/ connectors?
https://imechanica.org/node/18213
<div class="field field-name-body field-type-text-with-summary field-label-hidden"><div class="field-items"><div class="field-item even"><p>Hi, every body,</p>
<p> I want to model the boat sailing on the water surface in Abaqus with Explicit solver. To consider the buoyancy, I think of a way of setting springs on the reference point of the boat. In detail, When the boat is lifted up, the spring on the vertical direction will pull the boat back. When the prow of the boat rises and the stern drops the rotating spring will pull them back to the initial horizontal direction. However the question is the spring is not available in explicit solver. So I turned to using the connectors. But I am not sure how the connectors are used in this case. Can any one give me some advises? I will be grateful for any suggestions!<br />Thank you.</p>
</div></div></div><div class="field field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above"><div class="field-label">Forums: </div><div class="field-items"><div class="field-item even"><a href="/forum/109">Ask iMechanica</a></div></div></div><div class="field field-name-taxonomy-vocabulary-6 field-type-taxonomy-term-reference field-label-hidden"><div class="field-items"><div class="field-item even"><a href="/taxonomy/term/962">software</a></div></div></div><div class="field field-name-taxonomy-vocabulary-8 field-type-taxonomy-term-reference field-label-above"><div class="field-label">Free Tags: </div><div class="field-items"><div class="field-item even"><a href="/taxonomy/term/289">ABAQUS</a></div><div class="field-item odd"><a href="/taxonomy/term/2657">buoyancy</a></div></div></div>Thu, 23 Apr 2015 06:34:02 +0000yinqilin00718213 at https://imechanica.orghttps://imechanica.org/node/18213#commentshttps://imechanica.org/crss/node/18213buoyancy
https://imechanica.org/node/14578
<div class="field field-name-taxonomy-vocabulary-6 field-type-taxonomy-term-reference field-label-hidden"><div class="field-items"><div class="field-item even"><a href="/taxonomy/term/128">education</a></div></div></div><div class="field field-name-taxonomy-vocabulary-8 field-type-taxonomy-term-reference field-label-hidden"><div class="field-items"><div class="field-item even"><a href="/taxonomy/term/2657">buoyancy</a></div></div></div><div class="field field-name-body field-type-text-with-summary field-label-hidden"><div class="field-items"><div class="field-item even"><p>Can i say, the center of buoyancy and the center of gravity of the immersed part are same?</p>
</div></div></div>Tue, 23 Apr 2013 09:56:11 +0000urkabil14578 at https://imechanica.orghttps://imechanica.org/node/14578#commentshttps://imechanica.org/crss/node/14578Using Fluid Mechanics for Geologic Salt Domes?
https://imechanica.org/node/3549
<div class="field field-name-body field-type-text-with-summary field-label-hidden"><div class="field-items"><div class="field-item even"><p>
<span>I was recently presented with a problem concerning the migration of a salt formation in an area of Utah. After spending a little time looking at the given data, I decided it might be a problem that could be approached using fluid mechanics. The idea being that the salt formation, relatively speaking, is highly viscous and is free to respond to acting forces and deform appropriately. Essentially, I was hoping to treat the salt formation almost like the bladder of a water bed reacting to differential loading. </span>
</p>
<p>
<span>As far as the numbers are concerned, I have data sets that define X and Y coordinates and respective depths for various geological formations. These data points constitute the "tops" of the salt layer as well as layers above and below the salt. Along with these depths I am willing to make very broad and very general assumptions about the salt layer.</span>
</p>
<p>
<span><span>1.<span> </span></span></span><span>The salt is incompressible unlike the layers above it, and consequently as the layers above do compress with further deposition, the salt will act as a buoyant body that reacts to differential loading.</span>
</p>
<p>
<span><span>2.<span> </span></span></span><span>I would like to consider the salt as frictionless with respect to its upper and lower contacts due to its brittle nature (the salt is lying on what is essentially a sloped plain and so it is free to slide along that slope to achieve equilibrium).</span>
</p>
<p>
<span><span>3.<span> </span></span></span><span>The salt's volume is a constant, as there is little evidence of dissolution.</span>
</p>
<p>
<span><span>4.<span> </span></span></span><span>The underlying foundation of the salt has remained unchanged since initial deposition. </span>
</p>
<p>
<span>Anyway, where this leaves me is I can assume what the salt looked like at deposition and what it looks like now. I can find volumes and weights, and I am willing to apply appropriate generalizations and assumptions. From there I was wondering if it would be appropriate to use fluid mechanics to analyze the various forces acting upon the salt by the upper layers, and vice versa. I don't expect to get exact numbers, so much as a good idea about the general behavior of the salt with the final result being a good idea of where to look for areas of high stress and dynamic shifting. Ultimately, I hope to use this knowledge to locate probable regions of fracturing which I could then compare to current data of fracture locations and perhaps get correlation and maybe even forecasting.</span>
</p>
<p class="MsoNormal">
<span>I realize this is a mouth full for a forum but I thought it would be worth a try. Anyway, if anyone could give me an idea of the feasibility of perusing this problem and maybe even a few pointers in the right direction it would be greatly appreciated. Thank you for taking an interest and I look forward to your responses.</span>
</p>
</div></div></div><div class="field field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above"><div class="field-label">Forums: </div><div class="field-items"><div class="field-item even"><a href="/forum/440">Fluid Mechanics Forum</a></div></div></div><div class="field field-name-taxonomy-vocabulary-8 field-type-taxonomy-term-reference field-label-above"><div class="field-label">Free Tags: </div><div class="field-items"><div class="field-item even"><a href="/taxonomy/term/23">fluid mechanics</a></div><div class="field-item odd"><a href="/taxonomy/term/2082">Flow</a></div><div class="field-item even"><a href="/taxonomy/term/2654">salt</a></div><div class="field-item odd"><a href="/taxonomy/term/2655">salt domes</a></div><div class="field-item even"><a href="/taxonomy/term/2656">geology</a></div><div class="field-item odd"><a href="/taxonomy/term/2657">buoyancy</a></div></div></div>Mon, 21 Jul 2008 17:22:27 +0000Charlie Grummon3549 at https://imechanica.orghttps://imechanica.org/node/3549#commentshttps://imechanica.org/crss/node/3549