You are here
Postdoc in Mechanics and geometry of thin and slender structures, Aarhus University
Dear colleagues,
Applications are invited for a 2 year (1+1) postdoctoral position with a background in theoretical and computational mechanics, soft condensed matter physics, or Applied Mathematics. This project focuses on uncovering mathematical descriptions for use in the Japanese art of paper cutting, namely Kirigami, and Reticulated Structures. The research question is on how optimal geometric design leads to remarkable mechanical performance. Driven by a wide range of applications, materials with novel structural properties will be designed for diverse functionalities, which is of particular interest in the growing field of smart materials, where mechanical requirements must be satisfied while meeting sustainability and economic criteria. These are timely issues and most efficiently addressed by going beyond the ordinary properties of matter, towards engineered geometrical selection allowing the control of bulk properties. This is central to this work and we are looking for a candidate who is excited to contribute to the discovery of the next generations of advanced materials.
For more information and to apply to this position, please follow the link: http://international.au.dk/about/profile/vacant-positions/academic-positions/stillinger/Vacancy/show/1008833/5283/
Deadline: 30th of November 2018
- MKB's blog
- Log in or register to post comments
- 3965 reads
Comments
Post Doctoral Fellowship - Requested - Reg.
Dr. A. ANANDHA MOORTHY
332/F, Main Road, Kavandapadi Pudur,
Kavandapadi, Bhavani (TK) – 638 455,
Erode – District,
Tamil Nadu, India Mobile: +91 94884 70455
E-mail: anandhamoorthya@bitsathy.ac.in 94881 38658
appuanandh@gmail.com
Objective
Motivated and talented mechanical engineering professor driven to inspire students to pursue academic and personal excellence. Consistently strive to create a challenging and engaging learning environment in which students become life-long scholars and learners. Exceptional track record of research success with multiple published articles.
Career Summary
Personal Qualities
Key Responsibilities Handled
Education
2016
Ph. D
Completed
Anna University, Chennai
2008
M.E. - Engineering Design
70%
First Class
Kongu Engg College, Perundurai, Erode
2005
B.E. - Mechanical Engineering
70%
First Class
Erode Sengunthar Engg College, Perundurai, Erode
1999
D.M.E (Diploma in Mechanical Engineering)
83%
First Class Distinction With Honors
Al-Ameen Polytechnic, Erode
Certificate of Appreciation
· Received ‘Young Educator and Researcher Award’ from National Foundation for Entrepreneurship Development (NFED) in the 6th Teachers’ Day Awards and Celebrations – 2015 on 5th Sep 2015.
· Received ‘Certificate of Appreciation for Faculty Advisor’ from Lovely Professional University, LPU SAE INDIA Collegiate Club, Punjab, on 30th March 2015.
· Received ‘Certificate of Appreciation’ from Imperial Society of Innovative Engineers (ISIE), Jalandhar, Punjab, during 25th to 28th August 2016.
· Received ‘Young Scientist Fellowship’ from Tamil Nadu State Council for Science and Technology (TNSCST), on 12th April 2017.
· Received ‘Best Student Project Award’ from Tamil Nadu State Council for Science and Technology (TNSCST), on 12th April 2017.
· Shortlisted ‘ASDF Global Awards 2017’ for best academic professor.
· Received ‘Best Student Project Award’ from Tamil Nadu State Council for Science and Technology (TNSCST), on 25th January 2018.
Organizational Experience
· Three years industrial experience since April-1999 at Coimbatore Compressor Engg., Coimbatore and working on design projects.
Key Result Areas:
· Involved in Southern Railway projects
· Modeling for consumer, commercial and industrial products
· Assembly, Modeling and Drafting of components in Pro-E & AutoCAD
Handled the projects for
· Working on projects of Southern Railway, involved in the development of three cylinder air compressor
· Assembly, Modeling & Drafting of Compressor parts like Cylinder Head, Cylinder Jacket, Crankcase, Crankshaft, Connecting Rod, Piston and its subassemblies have been done
· Reverse engineering of compressor wheel by surface modeling
· Modeling of gear pump
Institutional Experience
· One year teaching experience in Sri Ragavendra Polytechnic College, Komarapalayam, Since March 2005.
· Ten years, three months of teaching experience in Bannari Amman Institute of Technology, Sathyamangalam, Since June 2008.
NPTEL Course Attended
· Processing of Polymers and Polymer Composites
Academic Project in UG
Title : Design of Air Pre-heater for Improving Overall Efficiency of FBC Boiler
Organization: STEEL AUTHORITY OF INDIA LIMITED, Salem
Description : The main objective of the project is to improve the overall efficiency of the boiler, at the same time reduce the overall fuel cost of fluidized bed combustion boiler by introducing Air Pre-Heater in to the existing system.
Academic Project in PG
Title : Effect of Booster Heating Coil in Foodstuff Display Cabinet by Experimental Investigation
Description : The objective of the project is to minimize the temperature difference inside cabinet with minimum energy consumption and minimum time requirement. For achieving this, booster heating coils are introduced in a specified location.
Academic Project in Ph.D
Title : Studies on Tribological Properties of Hybrid Aluminium Matrix Composites Reinforced with Fly ash and Solid Lubricants.
Description: This work has a set of themes which aims to develop materials with high strength to weight ratio and improved wear resistance in order to open the application fields for self-lubricating materials.
Title of Mini Projects
Title : Automated Weed Remover
: Paper act as a tool
: Integrated Weighing System for Commercial Vehicles
: Bulb Changing Mechanisms without an aid of ladder
: Flesh Cutter
: Quick Return Motion Mechanism
: Power Operated Grass Cutter
: Mini Drilling Machine
: Vegetable peeler for Commercial Application (Funded by TNSCST)
: Fabrication of Fertilizer Spraying Machine
Memorandum of Understanding
Name of the Company : Carl Zeiss, Bangalore
Purpose : Centre of Excellence in Coordinate Metrology
Date : 29th August 2017
Industry Defined Problem
Title : Development of Form Gauge for Chain Measurement
(Students Bagged Third Prize)
Consultancy Project
Title I : Performance Evaluation of Plain Bearings by Experimentation
Name of the Company : Best Pumps, Coimbatore
Title II : Solution for Failure of Worm and Worm Wheel Gear drive in Weaving Machine
Name of the Company : VAARI Textile Machine Manufacture, Namakkal
Patent
· Simplified Vegetable Peeler for Commercial and Domestic Use on 17th July 2018
Paper Published in International Journals (Total - 9)
Citations
20
20
h-index
1
1
i10-index
1
1
· A Anandha Moorthy, N Natarajan, R Sivakumar, M Manojkumar, M Suresh, “Dry Sliding Wear and Mechanical Behavior of Aluminium/Fly ash/Graphite Hybrid Metal Matrix Composite Using Taguchi Method” International Journal of Modern Engineering Research (IJMER) Vol.2, Issue.3, May-June 2012 pp-1224-1230 ISSN: 2249-6645.
· A Anandha Moorthy, N Natarajan, PK Palani, M Suresh, ” Study on Tribological Characteristics of Self-lubricating AA2218-Fly ash-White graphite Composites” International Journal of Engineering and Technology (IJET), ISSN : 0975-4024 Vol 5 No 5 Oct-Nov 2013.
· A Anandha Moorthy, N Natarajan, PK Palani, M Manojkumar, ” Microstructure and Dry Sliding Wear Behavior of AA2218 Based Self-Lubricating Metal Matrix Composites”, International Review of Mechanical Engineering (I.RE.M.E.), Vol. 7, N. 6 ISSN 1970 – 8734, September 2013.
· A Anandha Moorthy, S Vinodh kumar, S Kaviyarasu, N Natarajan, PK Palani, “Performance Evolution of Self-Lubricating Composite Materials By Experimentation” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684, p-ISSN: 2320-334X PP 14-18.
· A Anandha Moorthy, VC Uvaraja, N Natarajan, PK Palani, N Dhanendran, M Anantha Kumar, KS Satheesh, “Tribological Behavior of Aluminium based MMC Subjected to Various Temperature” International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 9, Number 22 (2014) pp. 14207-14215.
· A Anandha Moorthy, M Anantha Kumar, KS Satheesh, N Natarajan & PK Palani “Prediction of Tribological Properties of AA2218 based Metal Matrix Composites by Artificial Neural Network” International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.62 (2015).
· M Manojkumar, R Sivakumar, A Anandha Moorthy, “Optimization technique to study dry sliding wear behavior of Aluminium alloy 2218 based Self Lubricating Composite Materials” International Journal of Advance Research and Innovative Ideas in Education (IJARIIE) - ISSN(O) - 2395-4396, Vol-1, pp 953-965, Issue-5, 2015.
· A Anandha Moorthy, S Gangadharan & T Ramesh Kumar “Enchancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications” International Research Journal of Engineering and Technology, IF 4.45, ISSN 2395-0056 Vol. 3 No. 3 (March 2016).
· T Ramesh kumar, KL Senthil Kumar, A Anandha Moorthy and AD Latha “A study on mechanical behaviours of newly developed aluminium-based alloy” International Journal of Intellectual Advancements and Research in Engineering Computations, ISSN:2348-2079, Vol. 2, No. 5, pp 1991-1994, March 2017.
Paper Presented in International Conferences (Total - 13)
· A Anandha Moorthy, N Natarajan, “Application of Taguchi Techniques to Study Dry Sliding Wear Behaviour of hybrid Metal Matrix Composites” international convention cum pre-conference workshop on “Innovations in Engineering and Technology for Sustainable Development (IETSD 2012) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 3rd - 5th September 2012.
· Anandha Moorthy A, Natarajan N, Palani P K, Kumarbabu P, Anantha Kumar M, Satheesh K S, “Dry sliding wear Behaviour of Aluminium Alloy based Self Lubricating Hybrid Metal Matrix Composite Using Taguchi’s Techniques” International Conference on Advances in Design and Manufacturing (ICAD&M'14), ISBN 978-93-84743-12-3 © 2014 Bonfring, NIT Trichy.
· Anandha Moorthy A, Kumaresan R, Senthilkumar S, Nirmalkumar M and Bharathi S “Performance Analysis of Self-Lubricating Composite based Plain Bearing under different loads” International Conference on Developments in Engineering Research, ISBN: 978-1511884-075, 26th April 2015, Salem.
· A. Anandha Moorthy, M.Chellappan Vigneshwar, T. Jeeva”, Vibration Characteristics of Plain Bearings Subjected to Radial Load”, International Conference on Sustainable Materials, Design and Applications 2016 - (ICSMDA 16) 18th – 19th March 2016, Kongu Engineering College, Erode 638052, Tamilnadu, India.
· A. Anandha Moorthy, S Gangadharan “Enchancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications” International conference on Mechanical and Building Sciences (ICMBS-2016) Presented at Department of Mechanical Engineering, SNS College of Technology, Coimbatore on 23rd & 24th March 2016.
· T. Ramesh Kumar, KL. Senthilkumar, A. Anandha Moorthy, & R. Latha, “A Study on Mechanical Behaviours of Newly Developed Aluminium – Based Alloy”, First International Conference on Recent Innovations In Engineering, Technology and Management - (ICRIETM 2017) 25th March 2017, Nandha Engineering College, Erode - 52, Tamilnadu, India.
· A. Anandha Moorthy, T. Ramesh Kumar, G. Senthilkumar & S. Madheswaran, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”, Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing - (AMP17) 27th – 28th March 2017, Kalasalingam University - KLU, Krishnan Koil, Tamilnadu, India.
· T. Ramesh Kumar, A. Anandha Moorthy, KL. Senthilkumar & R. Latha, “Tribological and Mechanical Characteristics of Developed Heat Treated Al-SN-SI Alloy under Lubricated Conditions”, Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing - (AMP17), 27th – 28th March 2017, Kalasalingam University - KLU, Krishnan Koil, Tamilnadu, India.
· A. Anandha Moorthy, T. Ramesh Kumar & C. Sasikumar, “Improving the Performance of Centrifugal Pump by Applying Self – Lubricating Composite Material as a Material for Plain Bearing”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM – 17), 30th & 31st March 2017, M. Kumarasamy College of Engineering, Karur, India.
· A. Anandha Moorthy, C. Sasikumar, KT. Sevugan chetty, P. Sasikumar & T. Saran kumar, “Condition Monitoring of Plain Bearings prepared with Self-Lubricating Composite Materials” International Conference on Advanced Material Science and Technology (ICAMST), on 17 - 19 August 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District.
· G. Ramesh, VC. Uvaraja, A. Amarkarthick, C. Jagadheeshwaran & A. Anandha Moorthy, “Effect of Heat Treatment on Mechanical Properties Aluminium 7075 Hybrid Metal Matrix Composites” International Conference on Advanced Material Science and Technology (ICAMST), on 17 - 19 August 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District.
· A. Anandha Moorthy, E. Prakash, S. Madheswaran, G. Senthilkumar & C. Sasikumar, “Prediction System for Investigating Process Parameters on Dry Sliding Wear of Self-Lubricating Metal Matrix Composites”, Third International Conference on Advances in Industrial Engineering Applications - (ICAIEA 18) 03rd & 05th January 2018, Anna University, Chennai, Tamilnadu, India.
· E. Prakash, S. Madheswaran, A. Anandha Moorthy, Naveen Sankarannakalyani & K. Sivakumar, “Investigations on Surface Roughness and Volumetric Shrinkage of Acute Angle Parts Fabricated with Fusion Deposition Method”, Third International Conference on Advances in Industrial Engineering Applications - (ICAIEA 18) 03rd & 05th January 2018, Anna University, Chennai, Tamilnadu, India.
Paper Presented in National Conferences (Total - 21)
· A Anandha Moorthy, “Paper Act as a Tool (Wood Cutter)” – FUTURA 2007 – Bannari Amman Institute of Technology, Sathyamangalam, From 1st to 3rd September 2007.
· A Anandha Moorthy, Dr P Navaneetha Krishnan, “Effect of Booster Heating Coil in Food Stuff Display Cabinet-Experimental Investigation” - National Conference on Optimization Techniques in Engineering Sciences and Technology (OPTEST - 2008) – Bannari Amman Institute of Technology, Sathyamangalam, on 27th and 28th March 2008.
· A Anandha Moorthy, Dr P Navaneetha Krishnan, “Natural Heat Distribution Characteristics of Food Stuff Display Cabinet-Experimental Investigation” - National Conference on Resend Advancement in Mechanical Engineering (Mech RAME-2008) – Mahindhra Engineering College, Thiruchengodu.
· A Anandha Moorthy, E Prakash, “Effect of Rubbing in a Shaft, Bearing Housing Vibration Signatures and Detection of Possible Failures” - National Conference on Optimization Techniques in Engineering Sciences and Technology (OPTEST - 2009) – Bannari Amman Institute of Technology, Sathyamangalam.
· A Anandha Moorthy, N Natarajan, “Wind flow analysis of luxury vehicle radiator by using CFD” Sixth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2011) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 15th and 16th April 2011.
· A.Anandhamoorthy, M.Elango, “Dry sliding wear and Mechanical Behavior of Aluminium/Flyash /Graphite Hybrid Metal Matrix Composite Using Taguchi Method” Seventh National Conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2012) Presented at Department of Mechanical Engineering, BIT, Sathyamangalam, April 2012.
· A Anandha Moorthy, M Manojkumar, M Suresh, M Sivakumar, “Microstructure and Tribological Behaviour of Alluminium Alloy Based Self Lubricating Hybrid Metal Matrix Composite for High Temperature Applications” Eighth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2013) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 19th and 20th April 2013.
· A Anandha Moorthy, M Nandhagopal, M Suresh M Manojkumar, M Sivakumar, “Tribological Performance of an Alluminium 2218 Based Hybrid Metal Matrix Composites Produced by Stir Casting” Eighth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2013) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 19th and 20th April 2013.
· A Anandha Moorthy, M Sivakumar, M Manojkumar, M Suresh, “Effect of Addition of Fly ash Particulates on the Wear Behaviour in Allumium – Fly ash – Graphite Composites” Eighth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2013) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 19th and 20th April 2013.
· Anandha Moorthy A, Natarajan N, Palani P K, Anantha Kumar M, Satheesh K S, “Review on Tribological Characterization of Hybrid Metal Matrix Composite” Second National Conference on Futuristic Innovation in Engineering (NCFIE'15), Pg No 228 – 231, 7th March 2015, Arulmurugan College of Engineering, Karur.
· Anandha Moorthy A, Kumaresan R, Senthilkumar S, Natarajan N and Palani P K, “Dynamic Analysis of Journal Bearing Under Different Loads” Tenth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2015) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 10th and 11th April 2015.
· A Anandha Moorthy “Vibration Condition monitoring of Plain Bearings Subjected to Radial Load” Eleventh National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2016) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 18th and 19th March 2016.
· A Anandha Moorthy “Review on Tribological Characterization of AA2218 Based Metal Matrix Composites” Eleventh National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2016) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 18th and 19th March 2016.
· A Anandha Moorthy, S Gangadharan “Enhancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications” Ninth National conference on Advances in Mechanical Sciences (AIMS 2016) Presented at Department of mechanical Engineering, Kumaraguru College of Technology, Coimbatore on 18th March 2016.
· A Anandha Moorthy, Presented “Pedal operated vehicle for handless people”, National Conference on OPTEST – 2017 at BIT, Sathy, on 17th & 18th March 2017.
· A Anandha Moorthy, Presented “Catalytic Converter for IC Engines”, National Conference on OPTEST – 2017 at BIT, Sathy, on 17th & 18th March 2017.
· A Anandha Moorthy, Presented “3D Printing Technology for Medical Applications”, National Conference on OPTEST – 2017 at BIT, Sathy, on 17th & 18th March 2017.
· A Anandha Moorthy, presented “Design and Fabrication of Suspension system for All Terrain Vehicle”, National Conference on Advancements in Mechanical, Manufacturing & Civil Engineering (NCAMMCE-18), on 9th March, 2018, at M.Kumarasamy College of Engineering, Karur.
· A Anandha Moorthy, presented “Fabrication of Fertilizer Spraying Machine”, National Conference on Advancements in Mechanical, Manufacturing & Civil Engineering (NCAMMCE-18), on 9th March, 2018, at M.Kumarasamy College of Engineering, Karur.
· A Anandha Moorthy, presented “Failure Analysis of Gear Box”, National Conference on Advancements in Mechanical, Manufacturing & Civil Engineering (NCAMMCE-18), on 9th March, 2018, at M.Kumarasamy College of Engineering, Karur.
· A Anandha Moorthy, Assistant Professor Selection Grade “Condition Monitoring of Journal Bearings Subjected to Radial Load”, National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology, Coimbatore (NCETME-18), on 9th March.
· A Anandha Moorthy, Assistant Professor Selection Grade & N Santhosh, R Sivanarayanan, N Sathish “Condition Monitoring of Journal Bearings Subjected to Radial Load”, Student Project cum Seminar organized by Tamil Nadu State Council for Science and Technology in association with National College, Trichy on 20th July 2018.
Programmes Attended
Name of the Programme
Type of Programme
Organized by
Period / Duration
Finite Element Analysis
Faculty Development Programme
Dept of Mech Engg, BIT, Sathy
19th & 20th November 2008
Automation for Green Engineering
Seminar
Dept of Mechatronics Engg, Kongu Engg, Perundurai, Erode
11th & 12th December 2008
CATIA Training Programme
Workshop
CADD Technologies, Pollachi
7th – 22 September 2009
Research Methods and Tools for Engineering Faculty
Workshop
Dept of Mech Engg, BIT, Sathy
18th & 19th December 2009
Research Methods and Tools for Mechanical Engineering Faculty
Faculty Development Programme
AICTE, Dept of Mech Engg, BIT, Sathy
31st May – 11th June 2010
Industrial Automation with PLC, SCADA and DCS
Workshop
Dept of Elec and Ins Engg, BIT, Sathy
28th & 29th July 2010
Recent Trends in Composite Materials and its Processing
Workshop
Dept of Mech Engg, KPR Ins of Engg and Tech, Coimbatore
7th & 8th October 2011
Multi Objective Evolutionary Optimization Theory & Practice
Workshop
CSIR sponsored, Dept of Mech Engg, BIT, Sathy
29th & 30th June 2012
ACM Processing and Applicatons
Seminar
Dept of Mech Engg, Kongu Engg, Perundurai, Erode
13th July 2012
PEP Workshop
Workshop
BIT, Sathy
28th & 29th July 2012
Innovation in Engineering and Technology for Sustainable Development
Workshop
BIT, Sathy
3rd – 5th September 2012
Applied Design of Experiments for Engineering Applications Theory & Practice
Workshop
Dept of Mech Engg, BIT, Sathy
4th & 5th January 2013
Advanced Metrology and Calibration Techniques in Modern Production Industries
Workshop
TESPA, Dept of Production Engg, PSG College of Technology, Coimbatore
24th & 25th April 2013
Emerging Research and Advances in Composite Materials
Seminar
Dept of Mech Engg, BIT, Sathy
26th April 2013
Modeling and Optimization of Manufacturing System using Intelligent Techniques
Faculty Development Programme
Dept of Mech Engg, BIT, Sathy
6th – 18th May 2013
Intelligence Optimization Techniques in Engineering Sciences
Short Term Training Programme
ISTE – SRM , Dept of Mech Engg, BIT, Sathy
12th – 17th May 2014
Corrosion Evaluation of Engineering Materials
Seminar
Dept of Mech Engg, BIT, Sathy
29th September 2014
Regression Bassed Mathematical Modelling: Synthesis and Implementation for Engineering Research
Workshop
Dept of Mech Engg, BIT, Sathy
7th & 8th November 2014
Lean Manufacturing
Seminar
Dept of Mech Engg, BIT, Sathy
25th & 31st October – 01st November 2014
Finite Element Analysis Using ANSYS® 15.0
Workshop
Dept of Mech Engg, BIT, Sathy
11th September 2015
FDP on Train the Trainers Programme for Foundation Skills in Integraded Product Development (FSIPD)
Faculty Development Programme
TEQIP – II Sponsored, CIT, Coimbatore
19th – 23rd January 2016
Future Scope in Automotive Emission Control
Workshop
Dept of Mech, BIT, Sathy
13th Feb 2016
Vehicle Dynamics
Workshop
Dept of Automobile Engg, BIT, Sathy
5th & 6th January 2017
Geometrical Dimensioning and Tolerance & Press tool design
Faculty Development Programme
Dept of Mech, BIT, Sathy
17th to 22nd April 2017
3D Printing Technologies & CNC Programming
Workshop
MSME, COINDIA & Dept of Mech, BIT, Sathy
01st & 2nd July 2017
Mould Design and Die Casting
Faculty Development Programme
Dept of Mech, BIT, Sathy
31st July to 05th August 2017
Outcome Based Education and Accreditation
Workshop
National Board of Accreditation(NBA) in collaboration with Anna University at Anna University Regional Centre, Coimbatore
25th November 2017
SIEMENS Certified Professional Program
Workshop
Launch of SEIMENS Professional Program at Lee Meridian Hotel, Coimbatore
22nd February 2018
Funded Projects Applied
Sl. No.
Name of the Project
Funding Agency
Amount
Year
1.
Recent Advancements in Hybrid Composite Material(Workshop)
CSIR
6,000
2014
2.
Performance Evaluation of Plain Bearings in Submersible pump
TNSCST (Student Scheme)
15,000
2014
3.
Eco-friendly Lubricants
CSIR
60,000
2014
4.
Performance evolution of self lubricating plain bearing
TNSCST (Student Scheme)
15,000
2014
5.
Integrated Weighing solution for Commercial Vehicles
TNSCST (Student Scheme)
15,000
2015
6.
Vegetable peeler
TNSCST (Student Scheme)
15,000
2015
7.
Compact wall cleaning robot with mobile control
TNSCST (Student Scheme)
15,000
2015
8.
Emerging Research and Advances in Composite Material(Workshop)
DRDO
90,000
2015
9.
Rheological, Wear and Thermal Stability Studies on Vegetable Oil with Natural and Nano Metal Additives
DST (Under progress)
19,00,000
2015
10.
Rheological Studies on Vegetable Oil with Nano Additives
UGC
20,00,000
2016
11.
MS office training programme
for rural based womens
TNSCST
40, 000
2016
12.
Simplified cultivation process using double wheel HOE
TNSCST (Student Scheme)
15,000
2017
13.
Simplified vegetable peeler for commercial and domestic use
TNSCST (Student Scheme)
15,000
2017
14.
Domestic Incinerators for the Disposal of Menstrual Waste
TNSCST (Student Scheme)
15,000
2017
15.
Design and Fabrication of Bulb Changing Mechanism for Domestic and Industrial purpose
TNSCST (Student Scheme)
15,000
2017
16.
Industrial Waste Minimization
EDII & MSME
1,60,000
2017
17.
Synthesis, Machining and Testing of
Composite Materials (SMT)
AICTE
3,33,125
2017
18.
Design, Development and Validation of Thermocycler and Real Time Cycler (DNA amplification Instrument) mostly used in disease diagnosis
DST – IDP, New Delhi
35.02 Lakhs
March 2017
19.
Technological Interventions for Enhancing Productivity, Scalability and Value Addition to Obtain Fiber from a Local Plant (Urtica Dioica) for Tribals in Nagaland: A Waste to Wealth Programme
DST – SEED (Technological Intervention for Tribal Empowerment (TITE)
94,96,000 Lakhs
August 2018
Fund Received
Reviewer for Journal
Subjects Handled for UG Students
Name of the Subject: Design of Machine Elements Design of Transmission Systems
Strength of Materials Fluid Mechanics and Machinery
Hydraulics and Pneumatics Rapid Prototyping
Unconventional Machining Process Engineering Graphics
Total Quality Management Metrology and Quality Assurance
Engineering Economics Basics of Mechanical Engineering
Engineering Ethics Tool Design and Manufacturing
Industrial Robotics Tribology in Design
Subjects Handled for PG Students
Name of the Subject: Advanced Mechanisms Design & Simulations
Advanced Strength of Materials
Engineering System Dynamics
TRIZ for Product Development
Guest Lecture Delivered
S. No
Description
Institution
Date / Duration
1
Design of Machine Elements
CK College of Engineering and Technology, Cuddalore
Nov 2011
2
Design of Transmission Systems
CK College of Engineering and Technology, Cuddalore
Feb 2012
3
Design of Machine Elements
CK College of Engineering and Technology, Cuddalore
Nov 2014
4
Studies on Tribological Properties of Metal Matrix Composites
Sri Krishna College of Technology, Coimbatore
May 2015
5
Studies on Tribological Properties of Metal Matrix Composites
Sri Krishna College of Technology, Coimbatore
June 2015
6
Free and forced vibrations
SNS College of Engineering, Coimbatore
May 2016
7
Design of Transmission Systems
Nandha Engineering College, Perundurai
April 2017
8
Ferrous Alloy
Vidyaa Vikas College of Engineering and Technology, Thiruchengodu
22nd July 2017
9
Design of Machine Elements
Nandha College of Technology, Perundurai
20th & 23rd October 2017
10
Design of Thread Fasteners
Nandha College of Technology, Perundurai
10th September 2018
Programme Organized
Projects Guided for UG Students
No-of Projects Guided : Twenty three projects
Projects Guided for PG Students
No-of Projects Guided : Sixteen projects
Memberships
Life member (LM 71300) in ‘The Indian Society for Technical Education’
IT Skills
Operating System : Microsoft - Windows / Linux.
Office Suit : Microsoft - Office
Technical Software’s
Currently Working : AutoCAD 20.1, Pro-E Creo Parametric, Solid works & CATIA V5
Other Known Software : Ansys
Personal Information
Father’s Name : Mr P Appusamy (Late)
Permanent Address : 332/F, Main Road, Kavandapadi Pudur,
Kavandapadi, Bhavani(TK)- 638 455, Erode – District,
Tamil Nadu, India
Google Scholar link : https://scholar.google.co.in/citations?user=UZZdslIAAAAJ&hl=en
linkedin : https://www.linkedin.com/in/dr-a-anandha-moorthy-b1747649/
Date of Birth : 22-05-1978
Marital Status : Married
Sex : Male
Declaration
I hereby declare that the above furnished details are true to the best of my knowledge.
Place : Bhavani
Date :
(Dr A Anandha Moorthy)