User login

Navigation

You are here

POSTGRADUATE & POSTDOCTORAL VACANCIES EXIST IN UofT CANADA

POSTGRADUATE AND POSTDOCTORAL OPPORTUNITIES EXIST

IN MECHANICS AND AEROSPACE DESIGN LAB IN UNIVERSITY OF TORONTO

 We are seeking high calibre Masters and Doctoral students as well as Post Doctoral Fellows to join a very active and dynamic group at the University of Toronto. We are dealing with very exciting projects, including: Nanoengineering, Structural Health Monitoring, Design of Fast UAV (M=0.85), Structural Integrity of Aeroengine Compressor and Turbine Disc Assemblies, Morphing Wing Design, among many others.

Applications & further information: Professor S A Meguid (meguid@mie.utoronto.ca)

Comments

Professor S A Meguid
Director, EMDL
University of Toronto
Canada

hicham elmarghichi

hi im interested

Respected Sir(Prof. S A Meguid):

I am Hemaraju Pollayi pursuing PhD(Expected Graduation Date: August
2010) at Aerospace Engineering, Indian Institute of Science-Bangalore
and working with Dr. Dineshkumar Harursampath(PhD, Georgia Tech).

Could You please tell me if You have any position available for a post-doctoral research fellowship ?

I am very happy if You take Me as a post-doctoral research fellow.

I have forwarded My CV to Your E-mail: meguid@mie.utoronto.ca

Thanking You Sir

Yours Sincerely,
 raju.

Regards
================
Hemaraju Pollayi
Graduate Student(PhD Scholar)
Thesis Advisor: Dr. Dineshkumar Harursampath(PhD, GeorgiaTech)
                Founder-Director of NMCAD Lab
Nonlinear Multifunctional Composites Analysis and Design Lab(NMCAD Lab)
AR&DB Centre of Excellence in Composites Structures Technology(ACECOST)
Department of Aerospace Engineering
Indian Institute of Science
Bangalore - 560012, Karnataka, INDIA

E-Mail: pollayi_hemaraju@yahoo.com     
        pollayi.hemaraju@gmail.com

Gonzalo Villagomez's picture

Dear Professor Meguid,

My name is Gonzalo Villagomez, I hold a MS in Mechanical Engineering, Universidad de Guanajuato, Mexico. Currently I am a Stress Analysis Engineer of Rotating Parts, Military Engines at GE Aviation. I am looking for an opportunity to continue my education and I just sent you my CV for your review and consideration to your e-mail.

Thank you very much for you time.

Yours truly,

Gonzalo Villagomez.

 

Anandha Moorthy's picture

Dear sir,               I have completed my doctoral degree in mechanical engineering, which covers the areas like Tribology, Vibration Condition Monitoring, Heat Treatment & Self Lubricating Composite Materials. I am looking for Post Doctoral Fellowship. In this regard, I kindly request you to consider my request.  
 Note : Resume is attached with this mail for your kind referance

Anandha Moorthy's picture

   

 

 

Dr. A. ANANDHA MOORTHY  

                    332/F, Main Road, Kavandapadi Pudur,

                    Kavandapadi, Bhavani (TK) – 638 455,

                  Erode – District,

Tamil Nadu, India                                                                    Mobile: +91     94884 70455

                    E-mail: anandhamoorthya@bitsathy.ac.in                                                    94881 38658

                              appuanandh@gmail.com                                                                               

                 

Objective

                      

Motivated and talented mechanical engineering professor driven to inspire students to pursue academic and personal excellence. Consistently strive to create a challenging and engaging learning environment in which students become life-long scholars and learners. Exceptional track record of research success with multiple published articles.

 

Career Summary

 

  • A student oriented and having expertise in handling student queries possesses ten years experience as an assistant professor
  • Proficient in developing skills in students and provide them a growing path
  • Extensive experience in organizing workshops, seminars and conference
  • Excellent knowledge of subject and also have great practical knowledge
  • Outstanding track record in assuring student success

Personal Qualities

 

  • Excellent interpersonal skills.
  • Excellent planning, organizational and negotiation strengths.
  • Excellent communication skills in written and verbal both.
  • Ability to lead, reach consensus, establish goals and attain results.
  • A go-getter with a flexible and positive attitude

Key Responsibilities Handled

 

  • Mentor and Class advisor
  • Metrology laboratory in-charge
  • NBA Criteria III Co-coordinator
  • Faculty coordinator for Contraption team
  • Board of Studies Head
  • Overall ISTE coordinator for both students and faculty chapters
  • Department News Letter (Mechronicle) coordinator
  • Preparing the minutes of meeting for board of studies meeting
  • Coordinator for Students Skill Training Program

Education

                                   

                                                           

2016

Ph. D

Completed      

Anna University, Chennai

2008

M.E. - Engineering Design

70%

First Class

Kongu Engg College, Perundurai, Erode

2005

B.E. - Mechanical Engineering 

70%

First Class

Erode Sengunthar Engg College, Perundurai, Erode

1999

D.M.E (Diploma in Mechanical Engineering)

83%

First Class Distinction With Honors

Al-Ameen Polytechnic, Erode

                                   

Certificate of Appreciation

 

·         Received ‘Young Educator and Researcher Award’ from National Foundation for Entrepreneurship Development (NFED) in the 6th Teachers’ Day Awards and Celebrations – 2015 on 5th Sep 2015.

·         Received ‘Certificate of Appreciation for Faculty Advisor’ from Lovely Professional University, LPU SAE INDIA Collegiate Club, Punjab, on 30th March 2015.

·         Received ‘Certificate of Appreciation’ from Imperial Society of Innovative Engineers (ISIE), Jalandhar, Punjab, during 25th to 28th August 2016.

·         Received ‘Young Scientist Fellowship’ from Tamil Nadu State Council for Science and Technology (TNSCST), on 12th April 2017.

·         Received ‘Best Student Project Award’ from Tamil Nadu State Council for Science and Technology (TNSCST), on 12th April 2017.

·         Shortlisted ‘ASDF Global Awards 2017’ for best academic professor.

·         Received ‘Best Student Project Award’ from Tamil Nadu State Council for Science and Technology (TNSCST), on 25th January 2018.

                       

Organizational Experience

 

 

·         Three years industrial experience since April-1999 at Coimbatore Compressor Engg., Coimbatore and working on design projects.

 

 

 

   Key Result Areas:

 

·           Involved in Southern Railway projects

·           Modeling for consumer, commercial and industrial products

·           Assembly, Modeling and Drafting of components in Pro-E & AutoCAD

 

 Handled the projects for

 

·           Working on projects of Southern Railway, involved in the development of three cylinder air compressor

·           Assembly, Modeling & Drafting of Compressor parts like Cylinder Head, Cylinder Jacket, Crankcase, Crankshaft, Connecting Rod, Piston and its subassemblies have been done

·           Reverse engineering of compressor wheel by surface modeling

·           Modeling of gear pump

Institutional Experience

 

·           One year teaching experience in Sri Ragavendra Polytechnic College, Komarapalayam, Since March 2005.

·           Ten years, three months of teaching experience in Bannari Amman Institute of Technology, Sathyamangalam, Since June 2008.

 

NPTEL Course Attended

 

·         Processing of Polymers and Polymer Composites

 

Academic Project in UG

 

 

Title             :   Design of Air Pre-heater for Improving Overall Efficiency of FBC Boiler

 

Organization:   STEEL AUTHORITY OF INDIA LIMITED, Salem

 

Description  :  The main objective of the project is to improve the overall efficiency of  the  boiler, at the same time reduce the overall fuel cost of fluidized bed combustion boiler by introducing Air Pre-Heater in to the existing system.

 

 

Academic Project in PG

 

 

Title            :    Effect of Booster Heating Coil in Foodstuff Display Cabinet by Experimental           Investigation

 

Description :   The objective of the project is to minimize the temperature difference inside cabinet with minimum energy consumption and minimum time requirement. For achieving this, booster heating coils are introduced in a specified location.

 

Academic Project in Ph.D

 

Title            :    Studies on Tribological Properties of Hybrid Aluminium Matrix Composites Reinforced with Fly ash and Solid Lubricants.

 

Description:     This work has a set of themes which aims to develop materials with high strength to weight ratio and improved wear resistance in order to open the application fields for self-lubricating materials.

 

Title of Mini Projects

 

Title            :    Automated Weed Remover

:   Paper act as a tool

                   :    Integrated Weighing System for Commercial Vehicles

                   :    Bulb Changing Mechanisms without an aid of ladder

                   :    Flesh Cutter

 :  Quick Return Motion Mechanism

:   Power Operated Grass Cutter

:   Mini Drilling Machine

:   Vegetable peeler for Commercial Application (Funded by TNSCST)

:   Fabrication of Fertilizer Spraying Machine

                                                                                       

Memorandum of Understanding

 

Name of the Company     :      Carl Zeiss, Bangalore

Purpose                                         :      Centre of Excellence in Coordinate Metrology

Date                                              :      29th August 2017                    

 

Industry Defined Problem

 

Title            :    Development of Form Gauge for Chain Measurement

                        (Students Bagged Third Prize)

                                            

Consultancy Project

 

Title   I                           : Performance Evaluation of Plain Bearings by Experimentation

Name of the Company            : Best Pumps, Coimbatore

 

Title     II                                  : Solution for Failure of Worm and Worm Wheel Gear drive in Weaving                                                          Machine

Name of the Company            : VAARI Textile Machine Manufacture, Namakkal

 

Patent

 

 

·         Simplified Vegetable Peeler for Commercial and Domestic Use on 17th July 2018

 

Paper Published in International Journals (Total - 9)

 

Citations

20

20

h-index

1

1

i10-index

1

1

     

 

 

 

 

 

·           A Anandha Moorthy, N Natarajan, R Sivakumar, M Manojkumar, M Suresh, “Dry Sliding Wear and Mechanical Behavior of Aluminium/Fly ash/Graphite Hybrid Metal Matrix Composite Using Taguchi Method” International Journal of Modern Engineering Research (IJMER) Vol.2, Issue.3, May-June 2012 pp-1224-1230 ISSN: 2249-6645.

 

·           A Anandha Moorthy, N Natarajan, PK Palani, M Suresh, ” Study on Tribological Characteristics of Self-lubricating AA2218-Fly ash-White graphite Composites” International Journal of Engineering and Technology (IJET), ISSN : 0975-4024 Vol 5 No 5 Oct-Nov 2013.

 

·           A Anandha Moorthy, N Natarajan, PK Palani, M Manojkumar, ” Microstructure and Dry Sliding Wear Behavior of AA2218 Based Self-Lubricating Metal Matrix Composites”, International Review of Mechanical Engineering (I.RE.M.E.), Vol. 7, N. 6 ISSN 1970 – 8734, September 2013.

 

·           A Anandha Moorthy, S Vinodh kumar, S Kaviyarasu, N Natarajan, PK Palani, “Performance Evolution of Self-Lubricating Composite Materials By Experimentation” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684, p-ISSN: 2320-334X PP 14-18.

 

·           A Anandha Moorthy, VC Uvaraja, N Natarajan, PK Palani, N Dhanendran, M Anantha Kumar, KS Satheesh, “Tribological Behavior of Aluminium based MMC Subjected to Various Temperature” International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 9, Number 22 (2014) pp. 14207-14215.

 

·           A Anandha Moorthy, M Anantha Kumar, KS Satheesh, N Natarajan & PK Palani “Prediction of Tribological Properties of AA2218 based Metal Matrix Composites by Artificial Neural Network” International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.62 (2015).

 

·           M Manojkumar, R Sivakumar, A Anandha Moorthy, “Optimization technique to study dry sliding wear behavior of Aluminium alloy 2218 based Self Lubricating Composite Materials” International Journal of Advance Research and Innovative Ideas in Education (IJARIIE) - ISSN(O) - 2395-4396, Vol-1, pp 953-965, Issue-5, 2015.

 

·           A Anandha Moorthy, S Gangadharan & T Ramesh Kumar “Enchancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications” International Research Journal of Engineering and Technology, IF 4.45, ISSN 2395-0056 Vol. 3 No. 3 (March 2016).

 

·           T Ramesh kumar, KL Senthil Kumar, A Anandha Moorthy and AD Latha “A study on mechanical behaviours of newly developed aluminium-based alloy” International Journal of Intellectual Advancements and Research in Engineering Computations, ISSN:2348-2079, Vol. 2, No. 5, pp 1991-1994, March 2017.

 

 

Paper Presented in International Conferences (Total - 13)

 

·           A Anandha Moorthy, N Natarajan,  “Application of Taguchi Techniques to Study Dry Sliding Wear Behaviour of hybrid Metal Matrix Composites” international convention cum pre-conference workshop on “Innovations in Engineering and Technology for Sustainable Development (IETSD 2012) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 3rd - 5th September 2012.

 

·           Anandha Moorthy A, Natarajan N, Palani P K, Kumarbabu P, Anantha Kumar M, Satheesh K S, “Dry sliding wear Behaviour of Aluminium Alloy based Self Lubricating Hybrid Metal Matrix Composite Using Taguchi’s Techniques” International Conference on Advances in Design and Manufacturing (ICAD&M'14), ISBN 978-93-84743-12-3 © 2014 Bonfring, NIT Trichy.

 

·           Anandha Moorthy A, Kumaresan R, Senthilkumar S, Nirmalkumar M and Bharathi S “Performance Analysis of Self-Lubricating Composite based Plain Bearing under different loads” International Conference on Developments in Engineering Research, ISBN: 978-1511884-075, 26th April 2015, Salem.

 

·           A. Anandha Moorthy, M.Chellappan Vigneshwar, T. Jeeva”, Vibration Characteristics of Plain Bearings Subjected to Radial Load”, International Conference on Sustainable Materials, Design and Applications 2016 - (ICSMDA 16) 18th – 19th March 2016, Kongu Engineering College, Erode 638052, Tamilnadu, India.

·           A. Anandha Moorthy, S Gangadharan “Enchancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications” International conference on Mechanical and Building Sciences (ICMBS-2016) Presented at Department of Mechanical Engineering, SNS College of Technology, Coimbatore on 23rd & 24th March 2016.

·           T. Ramesh Kumar, KL. Senthilkumar, A. Anandha Moorthy, & R. Latha, “A Study on Mechanical Behaviours of Newly Developed Aluminium – Based Alloy”,  First International Conference on Recent Innovations In Engineering, Technology and Management - (ICRIETM 2017) 25th March 2017, Nandha Engineering College, Erode - 52, Tamilnadu, India.

·           A. Anandha Moorthy, T. Ramesh Kumar, G. Senthilkumar & S. Madheswaran, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”,  Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing - (AMP17) 27th – 28th March 2017, Kalasalingam University - KLU, Krishnan Koil, Tamilnadu, India.

·           T. Ramesh Kumar, A. Anandha Moorthy, KL. Senthilkumar & R. Latha, “Tribological and Mechanical Characteristics of Developed Heat Treated Al-SN-SI Alloy under Lubricated Conditions”, Indo-Brazil Bilateral Second International Conference on Advanced Materials & Processing - (AMP17), 27th – 28th March 2017, Kalasalingam University - KLU, Krishnan Koil, Tamilnadu, India.

·           A. Anandha Moorthy, T. Ramesh Kumar & C. Sasikumar, “Improving the Performance of Centrifugal Pump by Applying Self – Lubricating Composite Material as a Material for Plain Bearing”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM – 17), 30th & 31st March 2017, M. Kumarasamy College of Engineering, Karur, India.

·           A. Anandha Moorthy, C. Sasikumar, KT. Sevugan chetty, P. Sasikumar & T. Saran kumar, “Condition Monitoring of Plain Bearings prepared with Self-Lubricating Composite Materials” International Conference on  Advanced Material Science and Technology (ICAMST), on 17 - 19 August 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District.

·           G. Ramesh, VC. Uvaraja, A. Amarkarthick, C. Jagadheeshwaran & A. Anandha Moorthy, “Effect of Heat Treatment on Mechanical Properties Aluminium 7075 Hybrid Metal Matrix Composites” International Conference on  Advanced Material Science and Technology (ICAMST), on 17 - 19 August 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District.

·           A. Anandha Moorthy, E. Prakash, S. Madheswaran, G. Senthilkumar & C. Sasikumar, “Prediction System for Investigating Process Parameters on Dry Sliding Wear of Self-Lubricating Metal Matrix Composites”,  Third International Conference on Advances in Industrial Engineering Applications - (ICAIEA 18) 03rd & 05th January 2018, Anna University, Chennai, Tamilnadu, India.

 

·           E. Prakash, S. Madheswaran, A. Anandha Moorthy, Naveen Sankarannakalyani & K. Sivakumar, “Investigations on Surface Roughness and Volumetric Shrinkage of Acute Angle Parts Fabricated with Fusion Deposition Method”, Third International Conference on Advances in Industrial Engineering Applications - (ICAIEA 18) 03rd & 05th January 2018, Anna University, Chennai, Tamilnadu, India.

 

 

 

 

Paper Presented in National Conferences (Total - 21)

 

·           A Anandha Moorthy, “Paper Act as a Tool (Wood Cutter)” – FUTURA 2007 – Bannari Amman Institute of Technology, Sathyamangalam, From 1st to 3rd September 2007.

·           A Anandha Moorthy, Dr P Navaneetha Krishnan, “Effect of Booster Heating Coil in Food Stuff Display Cabinet-Experimental Investigation” - National Conference on Optimization Techniques in Engineering Sciences and Technology (OPTEST - 2008) – Bannari Amman Institute of Technology, Sathyamangalam, on 27th and 28th March 2008.

·           A Anandha Moorthy, Dr P Navaneetha Krishnan, “Natural Heat Distribution Characteristics of Food Stuff Display Cabinet-Experimental Investigation” - National Conference on Resend Advancement in Mechanical Engineering (Mech RAME-2008) – Mahindhra Engineering College, Thiruchengodu.

·           A Anandha Moorthy, E Prakash, “Effect of Rubbing in a Shaft, Bearing Housing Vibration Signatures and Detection of Possible Failures” - National Conference on Optimization Techniques in Engineering Sciences and Technology (OPTEST - 2009) – Bannari Amman Institute of Technology, Sathyamangalam.

·           A Anandha Moorthy, N Natarajan, “Wind flow analysis of luxury vehicle radiator by using CFD” Sixth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2011) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 15th and 16th April 2011.

·           A.Anandhamoorthy,  M.Elango, “Dry sliding wear and Mechanical Behavior of Aluminium/Flyash /Graphite Hybrid Metal Matrix Composite Using Taguchi Method” Seventh National Conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2012) Presented at Department of Mechanical Engineering, BIT, Sathyamangalam, April 2012.

·           A Anandha Moorthy, M Manojkumar, M Suresh, M Sivakumar, “Microstructure and Tribological Behaviour of Alluminium Alloy Based Self Lubricating Hybrid Metal Matrix Composite for High Temperature Applications” Eighth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2013) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 19th and 20th April 2013.

·           A Anandha Moorthy, M Nandhagopal, M Suresh M Manojkumar, M Sivakumar, “Tribological Performance of an Alluminium 2218 Based Hybrid Metal Matrix Composites Produced by Stir Casting” Eighth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2013) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 19th and 20th April 2013.

·           A Anandha Moorthy, M Sivakumar, M Manojkumar, M Suresh, “Effect of Addition of Fly ash Particulates on the Wear Behaviour in Allumium – Fly ash – Graphite Composites” Eighth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2013) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 19th and 20th April 2013.

·           Anandha Moorthy A, Natarajan N, Palani P K, Anantha Kumar M, Satheesh K S, “Review on Tribological Characterization of Hybrid Metal Matrix Composite” Second National Conference on Futuristic Innovation in Engineering (NCFIE'15), Pg No 228 – 231,  7th March 2015, Arulmurugan College of Engineering, Karur.

·           Anandha Moorthy A, Kumaresan R, Senthilkumar S, Natarajan N and Palani P K, “Dynamic Analysis of Journal Bearing Under Different Loads” Tenth National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2015) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 10th and 11th April 2015.

·           A Anandha Moorthy “Vibration Condition monitoring of Plain Bearings Subjected to Radial Load” Eleventh National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2016) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 18th and 19th March 2016.

·           A Anandha Moorthy “Review on Tribological Characterization of AA2218 Based Metal Matrix Composites” Eleventh National conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST 2016) Presented at Department of mechanical Engineering, BIT, Sathyamangalam on 18th and 19th March 2016.

·           A Anandha Moorthy, S Gangadharan “Enhancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications” Ninth National conference on Advances in Mechanical Sciences (AIMS 2016) Presented at Department of mechanical Engineering, Kumaraguru College of Technology, Coimbatore on 18th March 2016.

·            A Anandha Moorthy, Presented “Pedal operated vehicle for handless people”, National Conference on OPTEST – 2017 at BIT, Sathy, on 17th & 18th March 2017.

·            A Anandha Moorthy, Presented “Catalytic Converter for IC Engines”, National Conference on OPTEST – 2017 at BIT, Sathy, on 17th & 18th March 2017.

·            A Anandha Moorthy, Presented “3D Printing Technology for Medical Applications”, National Conference on OPTEST – 2017 at BIT, Sathy, on 17th & 18th March 2017.

·            A Anandha Moorthy, presented “Design and Fabrication of Suspension system for All Terrain Vehicle”, National Conference on Advancements in Mechanical, Manufacturing & Civil Engineering (NCAMMCE-18), on 9th March, 2018, at M.Kumarasamy College of Engineering, Karur.

·            A Anandha Moorthy, presented “Fabrication of Fertilizer Spraying Machine”, National Conference on Advancements in Mechanical, Manufacturing & Civil Engineering (NCAMMCE-18), on 9th March, 2018, at M.Kumarasamy College of Engineering, Karur.

·            A Anandha Moorthy, presented “Failure Analysis of Gear Box”, National Conference on Advancements in Mechanical, Manufacturing & Civil Engineering (NCAMMCE-18), on 9th March, 2018, at M.Kumarasamy College of Engineering, Karur.

·            A Anandha Moorthy, Assistant Professor Selection Grade “Condition Monitoring of Journal Bearings Subjected to Radial Load”, National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology, Coimbatore (NCETME-18), on 9th March.

·            A Anandha Moorthy, Assistant Professor Selection Grade & N Santhosh, R Sivanarayanan, N Sathish  “Condition Monitoring of Journal Bearings Subjected to Radial Load”, Student Project cum Seminar organized by Tamil Nadu State Council for Science and Technology in association with National College, Trichy on 20th July 2018.

 

 

 

 

Programmes Attended

 

 

Name of the Programme

Type of Programme

Organized by

Period / Duration

Finite Element Analysis

Faculty Development Programme

Dept of Mech Engg, BIT, Sathy

19th & 20th November 2008

Automation for Green Engineering

Seminar

Dept of Mechatronics Engg, Kongu Engg, Perundurai, Erode

11th & 12th December 2008

CATIA Training Programme

Workshop

CADD Technologies, Pollachi

7th – 22 September 2009

Research Methods and Tools for Engineering Faculty

Workshop

Dept of Mech Engg, BIT, Sathy

18th & 19th December 2009

Research Methods and Tools for Mechanical Engineering Faculty

Faculty Development Programme

AICTE, Dept of Mech Engg, BIT, Sathy

31st May – 11th June 2010

Industrial Automation with PLC, SCADA and DCS

Workshop

Dept of Elec and Ins Engg, BIT, Sathy

28th & 29th July 2010

Recent Trends in Composite Materials and its Processing

Workshop

Dept of Mech Engg, KPR Ins of Engg and Tech, Coimbatore

7th & 8th October 2011

Multi Objective Evolutionary Optimization Theory & Practice

Workshop

CSIR sponsored, Dept of Mech Engg, BIT, Sathy

29th & 30th June 2012

ACM Processing and Applicatons

Seminar

Dept of Mech Engg, Kongu Engg, Perundurai, Erode

13th July 2012

PEP Workshop

Workshop

BIT, Sathy

28th & 29th July 2012

Innovation in Engineering and Technology for Sustainable Development

Workshop

BIT, Sathy

3rd – 5th September 2012

Applied Design of Experiments for Engineering Applications Theory & Practice

Workshop

Dept of Mech Engg, BIT, Sathy

4th & 5th January 2013

Advanced Metrology and Calibration Techniques in Modern Production Industries

Workshop

TESPA, Dept of Production Engg, PSG College of Technology, Coimbatore

24th & 25th April 2013

Emerging Research and Advances in Composite Materials

Seminar

Dept of Mech Engg, BIT, Sathy

26th April 2013

Modeling and Optimization of Manufacturing System using Intelligent Techniques

Faculty Development Programme

Dept of Mech Engg, BIT, Sathy

6th – 18th May 2013

Intelligence Optimization Techniques in Engineering Sciences

Short Term Training Programme

ISTE – SRM , Dept of Mech Engg,  BIT, Sathy

12th – 17th May 2014

Corrosion Evaluation of Engineering Materials

Seminar

Dept of Mech Engg,  BIT, Sathy

29th September 2014

Regression Bassed Mathematical Modelling: Synthesis and Implementation for Engineering Research

Workshop

Dept of Mech Engg,  BIT, Sathy

7th & 8th November 2014

Lean Manufacturing

Seminar

Dept of Mech Engg,  BIT, Sathy

25th & 31st October – 01st November  2014

Finite Element Analysis Using ANSYS® 15.0

Workshop

Dept of Mech Engg,  BIT, Sathy

11th September 2015

FDP on Train the Trainers Programme for Foundation Skills in Integraded Product Development (FSIPD)

Faculty Development Programme

TEQIP – II Sponsored, CIT, Coimbatore

19th – 23rd January 2016

Future Scope in Automotive Emission Control

Workshop

Dept of Mech, BIT, Sathy

13th Feb 2016

Vehicle Dynamics

Workshop

Dept of Automobile Engg, BIT, Sathy

5th & 6th January 2017

Geometrical Dimensioning and Tolerance & Press tool design

Faculty Development Programme

Dept of Mech, BIT, Sathy

17th to 22nd April 2017

3D Printing Technologies & CNC Programming

Workshop

MSME, COINDIA & Dept of Mech, BIT, Sathy

01st & 2nd July  2017

Mould Design and Die Casting

Faculty Development Programme

Dept of Mech, BIT, Sathy

31st July to 05th August 2017

Outcome Based Education and Accreditation

Workshop

National Board of Accreditation(NBA) in collaboration with Anna University at Anna University Regional Centre, Coimbatore

25th November 2017

SIEMENS Certified Professional Program

Workshop

Launch of SEIMENS Professional Program at Lee Meridian Hotel, Coimbatore

22nd February 2018

 

 

Funded Projects Applied

 

Sl. No.

Name of the Project

Funding Agency

Amount

Year

1.               

Recent Advancements in Hybrid Composite Material(Workshop)

CSIR

6,000

2014

2.               

Performance Evaluation of Plain Bearings in Submersible pump

TNSCST (Student Scheme)

15,000

2014

3.               

Eco-friendly Lubricants

CSIR

60,000

2014

4.               

Performance evolution of self lubricating plain bearing

TNSCST (Student Scheme)

15,000

2014

5.               

Integrated Weighing solution for Commercial Vehicles

TNSCST (Student Scheme)

15,000

2015

6.               

Vegetable peeler

TNSCST (Student Scheme)

15,000

2015

7.               

Compact wall cleaning robot with mobile control

TNSCST (Student Scheme)

15,000

2015

8.               

Emerging Research and Advances in Composite Material(Workshop)

DRDO

90,000

2015

9.               

Rheological, Wear and Thermal Stability Studies on Vegetable Oil with Natural and Nano Metal Additives

DST (Under progress)

19,00,000

2015

10.           

Rheological Studies on Vegetable Oil with Nano Additives

UGC

20,00,000

2016

11.           

MS office training programme

for rural based womens

TNSCST

40, 000

2016

12.           

Simplified cultivation process using double wheel HOE

TNSCST (Student Scheme)

15,000

2017

13.           

Simplified vegetable peeler for commercial and domestic use

TNSCST (Student Scheme)

15,000

2017

14.           

Domestic Incinerators for the Disposal of Menstrual Waste

TNSCST (Student Scheme)

15,000

2017

15.           

Design and Fabrication of Bulb Changing Mechanism for Domestic and Industrial purpose

TNSCST (Student Scheme)

15,000

2017

16.           

Industrial Waste Minimization

EDII & MSME

1,60,000

2017

17.           

Synthesis, Machining and Testing of

Composite Materials (SMT)

AICTE

3,33,125

2017

18.           

Design, Development and Validation of Thermocycler and Real Time Cycler (DNA amplification Instrument) mostly used in disease diagnosis

DST – IDP, New Delhi

35.02 Lakhs

March 2017

19.           

Technological Interventions for Enhancing Productivity, Scalability and Value Addition to Obtain Fiber from a Local Plant (Urtica Dioica) for Tribals in Nagaland: A Waste to Wealth Programme

DST – SEED (Technological Intervention for Tribal Empowerment (TITE)

94,96,000 Lakhs

August   2018

 

Fund Received

 

  • Indian Society for Technical Education Conference grant of Rs 5000 for four consecutive years.
  • Tamil Nadu State Council for Science and Technology (TNSCST) received a grant of Rs 30,000 for Young Scientist Fellowship, on 12th April 2017.
  • Tamil Nadu State Council for Science and Technology (TNSCST) received a grant of Rs 10,000 for Best Student Project Award, on 12th April 2017.
  • DST – IDP, New Delhi received a grant of Rs 35.02 Lakhs for a project on “Design, Development and Validation of Thermocycler and Real Time Cycler (DNA amplification Instrument) mostly used in disease diagnosis”, on March 2017.

 

Reviewer for Journal

 

  • Inderscience Publications - International Journal of Environment and Sustainable Development
  • Premier Publishers - International Research Journal of Materials Science and Engineering

 

Subjects Handled for UG Students

 

Name of the Subject:   Design of Machine Elements               Design of Transmission Systems

                                    Strength of Materials                            Fluid Mechanics and Machinery

                                    Hydraulics and Pneumatics                  Rapid Prototyping

                                    Unconventional Machining Process     Engineering Graphics

                                    Total Quality Management                   Metrology and Quality Assurance

                                    Engineering Economics                                   Basics of Mechanical Engineering

            Engineering Ethics                               Tool Design and Manufacturing

            Industrial Robotics                               Tribology in Design    

 

Subjects Handled for PG Students

 

Name of the Subject:   Advanced Mechanisms Design & Simulations

                                    Advanced Strength of Materials

Engineering System Dynamics

TRIZ for Product Development

Guest Lecture Delivered

 

S. No

Description

Institution

Date / Duration

1

Design of Machine Elements

CK College of Engineering and Technology, Cuddalore

Nov 2011

2

Design of Transmission Systems

CK College of Engineering and Technology, Cuddalore

Feb 2012

3

Design of Machine Elements

CK College of Engineering and Technology, Cuddalore

Nov 2014

4

Studies on Tribological Properties of Metal Matrix Composites     

Sri Krishna College of Technology, Coimbatore

May 2015

5

Studies on Tribological Properties of Metal Matrix Composites

Sri Krishna College of Technology, Coimbatore

June 2015

6

Free and forced vibrations

SNS College of Engineering, Coimbatore

May 2016

7

Design of Transmission Systems

Nandha Engineering College, Perundurai

April 2017

8

Ferrous Alloy

Vidyaa Vikas College of Engineering and Technology, Thiruchengodu

22nd July 2017

9

Design of Machine Elements

Nandha College of Technology, Perundurai

20th & 23rd October 2017

10

Design of Thread Fasteners

Nandha College of Technology, Perundurai

10th September 2018

 

 

Programme Organized

 

  • One day workshop on Composite Materials
  • National Conference on ‘Optimization Techniques in Engineering Sciences and Technologies’ for four consecutive years
  • More than ten guest lecture programmes have been arranged for the benefit of students and faculty through ISTE.
  • One day workshop on ‘Tool Design and Manufacturing’, Presented by Mr. A Chellathurai, Associate Head, Tool Room Roots Precision Products Private Limited, Coimbatore, on 17th September 2016.
  • Competition for Contraption event has been organized on 23rd Feb 2017, four no-of teams participated.
  • Competition for Contraption event has been organized on 7 – 9th September 2017, Six no-of teams participated.
  • One day seminar on “Scanning Electron Microscope” by Carl Zeiss Pvt. Ltd., Bangalore, on 1st November 2017.

 

Projects Guided for UG Students

 

No-of Projects Guided             : Twenty three projects

 

Projects Guided for PG Students

 

No-of Projects Guided             : Sixteen projects

 

Memberships

 

Life member (LM 71300) in ‘The Indian Society for Technical Education’

 

IT Skills

 

Operating System                     : Microsoft - Windows / Linux.

Office Suit                               : Microsoft - Office

 

Technical Software’s

     

Currently Working                   :  AutoCAD 20.1, Pro-E Creo Parametric, Solid works & CATIA V5

Other Known Software                        :  Ansys

 

Personal Information

 

Father’s Name            :  Mr P Appusamy (Late)

Permanent Address      :  332/F, Main Road, Kavandapadi Pudur,

                                       Kavandapadi, Bhavani(TK)- 638 455, Erode – District,

                                       Tamil Nadu, India

Google Scholar link     :  https://scholar.google.co.in/citations?user=UZZdslIAAAAJ&hl=en

linkedin                       :  https://www.linkedin.com/in/dr-a-anandha-moorthy-b1747649/

Date of Birth                :  22-05-1978

Marital Status               :  Married

Sex                              :  Male            

 

Declaration

 

I hereby declare that the above furnished details are true to the best of my knowledge.

Place    : Bhavani

Date     :                                                                      

(Dr A Anandha Moorthy)       

Subscribe to Comments for "POSTGRADUATE & POSTDOCTORAL VACANCIES EXIST IN UofT CANADA"

Recent comments

More comments

Syndicate

Subscribe to Syndicate