SIMULIA's blog

In the design of hearing instruments it is important to achieve as high gain as possible

without causing oscillation in the device, due to feedback between the microphones and the

Due to concerns over particle generation in conventional metal-on-polyethylene hip bearings used in total hip arthroplasty (THA), interest in advanced low-wear bearing alternatives such as ceramic-on-ceramic (CoC) couples has reemerged. While ceramics demonstrate excellent

An understanding of functional responses in oral bone is a crucial component of dental biomechanics. The purpose of this study was to investigate the use of an osseointegrated implant as support for a free-end removable partial denture (RPD) on the potential biological remodelling response during mastication. A three-dimensional (3D) finite element analysis (FEA) was performed to determine the biomechanical responses to masticatory loading in the posterior mandible.

A person specific drop foot brace was simulated in the commercial finite element code Abaqus.The geometry was imported from a 3D optical scan of the actual surface and modeled as a composite material layup defined in a local discrete material coordinate system. The finite

element model was used in order to model the stance phase in a normal walking. The material

choice is a challenging task giving flexibility to the brace together with sufficiently stiffness and

fatigue strength. The simulation has been compared with measurements from a strain gauge

mounted foot brace tested in use. Based on simulations, a large number of expensive trial and

For clinicians and medical device manufacturers, in-vitro and in-vivo testing of the knee are important methods for evaluating treatment techniques. However, numerical models that can provide much of the same information will become of more service and are a new focus of the modeling community. A continued effort has centered on specimen-specific anatomical and functional models, in terms of both geometry and mechanical properties of the tissue constituents.

A variety of polymers are used extensively for both medical applications and consumer products. Most of these polymers exhibit time-dependant behavior which varies significantly with environmental conditions. Injection molding technologies generally offer application design freedom and options for several functions build into each component. Meanwhile analysts are often faced with the difficulties of predicting the response of the final product.

Numerical methods applicable to the tibia bone and soft tissue biomechanics of an ACL reconstructed knee are presented in this paper. The aim is to achieve a better understanding  of the mechanics of an ACL reconstructed knee. The paper describes the methodology applied in the development of an anatomically detailed three-dimensional ACL reconstructed knee model for finite element analysis from medical image data obtained from a CT scan. Density segmentation techniques are used to geometrically define the knee bone structure and the encapsulated soft tissues configuration.

As the maximum speed of bullet trains continues to increase, overheating and thermal deformation/stress on brake systems are going to be critical for emergency stops. Precise prediction of the maximum temperature is needed for the design of brake systems, especially for both discs and linings, where how to handle the high speed spinning of discs is the point of the heat/structure coupled analyses. Abaqus provides couple of potential methods but each one had critical shortcomings.

Electrically operated high temperature furnaces and reactors are used in many industrial

manufacturing processes such as sintering or single crystal growth in order to allow for the

required process conditions. In view of their outstanding characteristics refractory metals are

Since the 1946 issuance of the ASTM bearing steel specification, A295, the research and

development of bearing steels has resulted in substantially improved fatigue and wear