User login

Navigation

You are here

3D printed Polyurethane : Viscoelastic experimental characterization and computational modelling

mokarram76's picture

Digital Light Synthesis (DLS) technology creates ample opportunities for making 3D printed soft polymers for a wide range of grades and properties. In DLS, a 3D printer uses a continuous building technique in which the curing process is activated by an ultra-violet (UV) light. In this contribution, EUP40, a recently invented commercially available elastomeric polyurethane (EPU) printed by the DLS technology, is experimentally characterized. For characterizing the mechanical properties, an extensive viscoelastic experimental study on the digitally printed EPU taking the strain rate-dependence are conducted. The study reveals a significant time-dependency on its mechanical responses. Moreover, the material demonstrates noticeable nonlinear viscosities that depend on strain and strain rates. Based on the experimental findings for the printed elastomer, a large strain viscoelastic model is devised where evolution laws are enhanced by strain and strain rate-dependent nonlinear viscosities. Following identifications of relevant material parameters, we validate the model with the experimental data that show its good predictability. Such an extensive experimental study along with a constitutive model will help in designing and simulating more complex cellular and structured metamaterials using 3D printed elastomeric polyurethanes.

For details, please see the link

https://www.sciencedirect.com/science/article/abs/pii/S0020746220302080

AttachmentSize
PDF icon EPU40NonLin2020.pdf1.79 MB
Subscribe to Comments for "3D printed Polyurethane : Viscoelastic experimental characterization and computational modelling"

More comments

Syndicate

Subscribe to Syndicate