Skip to main content

Call for Abstract Submission to SES2019 Symposium 3.9 Multiscale modeling of molecular, cellular, tissue, and organ mechanics

Submitted by Ying Li on
conference

Dear Colleagues,

You are cordially invited to submit your one-page abstract to our Symposium 3.9 Multiscale modeling of molecular, cellular, tissue, and organ mechanics for The 56th Annual Technical Meeting of the Society of Engineering Science (SES2019) 

Date & Location:

Washington University in St. Louis (WashU) during 13-15 October 2019.

 

Directional and oscillating residual stress on the mesoscale in additively manufactured Ti-6Al-4V

Submitted by Mike Prime on

.
.

In this work, we were able to improve existing residual stress measurement capabilities so that we could measure smaller length scales. We were able to measure residual stresses that oscillated from build layer to build layer (0.5 mm thick) in an additively manufactured part. The oscillations persisted over nearly 30 layers!


The paper is free until April 20, 2019 at https://authors.elsevier.com/c/1YekJ4r9SUFESl

 

 

Call for abstracts: Symposium on 3D/4D printed functional materials and structures in 2019 SES Meeting

Submitted by Kai Yu on
conference
SES 2019

Dear colleagues:

     We would like to invite you to submit an abstract to the symposium on 3D/4D printed functional materials and structures at the 2019 Society of Engineering Science meeting to be held from October 13 to October 15 on the campus of Washington University in St. Louis, MO, USA.

Urgent: 2 fully-funded PhD theses at Synopsis (Exeter) / Cardiff University / University of Luxembourg in machine learning/biomedical simulations/3D medical image processing

Submitted by Pierre Kerfriden on
research
phd
machine learning
Finite Element Method
High Performance Computing
3D image processing
Synopsys NE Ltd (https://www.synopsys.com/simpleware.html), Cardiff University and University of Luxembourg invites applications for 2 Early Stage Researcher position (Doctoral Candidate) as part of the Rapid Biomechanics and Simulation for Personalized Clinical Design (RAINBOW) MCSA European Training Network. RAINBOW is funded under the European Union’s Horizon 2020 research and innovation program.
 

Simulation of crack behavior of secondary particles in Li-ion battery electrodes during lithiation/de-lithiation cycles

Submitted by zhan-sheng guo on

The loss of connectivity in particle-based LiMO2 (M = Ni, Co, Al, and/or Mn) electrodes due to mechanical failure
and fracture at the interface between primary particles is one of the major causes of capacity fading in Li-ion
batteries (LIBs) after certain electrochemical cycles. In this study, a model of a secondary particle composed
of randomly distributed primary particles is established using a fractal algorithm. The finite element method
with cohesive crack modeling is employed to simulate the intraparticle fracture within the secondary particle.

PhD position at the Institute of Mechanics, OVGU Magdeburg, Germany

Submitted by djuhre on
job

I have an opening PhD Position at our Institute of Mechanics, Otto von Guericke University Magdeburg (Germany).
The candidate should work in the field of new solution algorithms for complex simulations.
Additionally, the willingnes of teaching (in english as well as in german) is premised.
Attached you will find the corresponding job advertisement.

Subscribe to