It is well-recognized that MEMS switches, compared to their more traditional solid state counterparts, have several important advantages for wireless communications. These include superior linearity, low insertion loss and high isolation. Indeed, many potential applications have been investigated such as Tx/Rx antenna switching, frequency band selection, tunable matching networks for PA and antenna, tunable filters, and antenna reconfiguration.
However, none of these applications have been materialized in high volume products to a large extent because of reliability concerns, particularly those related to the metal contacts. The subject of the metal contact in a switch was studied extensively in the history of developing miniaturized switches, such as the reed switches for telecommunication applications. While such studies are highly relevant, they do not address the issues encountered in the sub 100mN, low contact force regime in which most MEMS switches operate. At such low forces, the contact resistance is extremely sensitive to even a trace amount of contamination on the contact surfaces. Significant work was done to develop wafer cleaning processes and storage techniques for maintaining the cleanliness. To preserve contact cleanliness over the switch service lifetime, several hermetic packaging technologies were developed and their effectiveness in protecting the contacts from contamination was examined.
Recent comments