You are here
smeared crack concrete output problem
Hello Guys.. I am modelling single dry shear key which is in the joint of segmental bridge, I model the concrete by using
smeared concrete model.the model in working and i get the results .Please can anyone help me how to find the crack
pattern ?? Really i stoprd at this point for more than 15 days !! I read the manual and it says that output information for
smeared concrete model is CRACK and CONF but I cant figure out where can I find it ..on the other word how I can
show the failed elements according to the failure criteria which are defined in the input ...... Please any help how to find
them with some explenation how to find them because i am new in abaqus ..thanks
- rabeeshammas's blog
- Log in or register to post comments
- 4029 reads
Comments
Help on tank modelling with ABAQUS
Good morning,
I'm dealing with the model of a tank and I'm using the finite element software Abaqus. Unfortunately, I'm totally new to this program and so I have the following very trivial problem: I've to model a tank with two different thicknesses, 30mm in the bottom part and 15 mm in the top part. How can I do that?
I've to create the 2 different parts separately and then put them together in the assembly? In this case, how can I manage the interaction between the two parts?
Or there is another method (for example using the discrete field tool)? Which is the most efficient method?
Thanks in advance.