software

Seismic response of liquid storage tank floating roofs involve phenomena that require dynamic nonlinear geometric and material behavior as well as surface to surface contact. Good engineering practice requires a practical analytical approach that captures the essential ingredients of structural behavior under earthquake excitation by making reasonable, conservative, and manageable approximations to the actual conditions. This paper discusses an approach used in Abaqus to calculate the stresses and deformations of a liquid storage tank floating roof under seismic loading.

The paper deals with the dynamic performance of a simply reinforced concrete tower built using prefabricated elements. The main uncertainty of this strategy stems from the possible cracking of the concrete and its implications on the stiffness, natural frequency and dynamic amplification of the tower.

Sliding bearing is widely used in machine building, power generation, automobile industry, mining industry. Characteristics of the bearing are defined by using several methods as theoretical calculations, engineering semi-empirical calculations or using numerical simulations (Petrushina, 2006). A calculation of sliding bearing parameters using direct coupling (Aksenov et al., 2004, Aksenov et al., 2006) between Abaqus finite-element code and FlowVision finite-volume code is described in this paper.

Nearly no load bearing behaviour of reinforced concrete members allows such varied interpretations and complex discussions as the shear behaviour. Especially the three-dimensional problem of the punching shear failure of reinforced concrete members is internationally discussed. Nevertheless up to now, there is no unified design approach or even an overall accepted design model. Especially for large structural members, as they are commonly used in industrial structures and high-rise structures, the experimental background is missing.

Nonlinear analysis using Riks method is suitable for predicting buckling, post-buckling, or collapse of certain types of structures, materials, or loading conditions, where linear or eigenvalue method will become inadequate or incapable, especially when nonlinear material, such as plasticity, is present, or post-buckling behavior is of interest.

The use of expandable tubulars has emerged as a popular technology for drilling and completing wells. While expandable tubulars vary in type depending upon the application and specific well requirements, the most common approach is to actually form the metals downhole, which presents unprecedented challenges for tool designers. The costs and timelines to achieve a “workable” product can be tremendous.

Thermoelastic stress analysis (TSA) is a non-destructive method that is used to assess structural stress. It is based on the ability to measure stress induced thermal emissions during cyclic loading with an infrared camera. It has potential applications for the monitoring of wind turbine blades certification tests. In this work, conducted as part of the UK SuperGen Wind consortium, finite element (FE) analyses are conducted to evaluate the potential correlation with TSA outputs.

The purpose of the present work is to discuss some FEM procedures and experimental methods that are currently used in the pipeline industry and open the way to the possibility of developing new experimental apparatuses which can provide much more economical alternatives to traditional design codes and tests.

Expandable sand screens are a relatively novel sand control system, which are used to control the ingress of solids in oil and gas reservoirs with weak and unconsolidated formations. They combine the ease of installation of conventional screens with the borehole support of a gravel pack.

There are two different variations of expandable screens; a system based on a slotted basepipe which are easy to expand but relatively low in strength and a system based on a drilled basepipe which are very strong but difficult to expand.

Expandable sand screens are a sand control system, which is used to control the ingress of solids in oil and gas reservoirs with weak and unconsolidated formations. There are two different variations of expandable screens; a system based on a slotted basepipe which are easy to expand compliant to the formation but is relatively low in strength and a system based on a drilled basepipe which is very strong but is more difficult to expand compliantly. FEA has been used to model the slotted basepipe type to better understand the interaction of the expanded screen with the rock formations.