Blog posts

An Abaqus/Standard FEA based study was carried out to develop a structural format for a wing sail used on a sailing boat, V-39 Albatross. As well as providing a novel structural solu-tion to meet a challenging set of requirements, the study has given the necessary mass properties and stiffness data required to further progress the preliminary design phase of the overall boat. The brief for the boat is to set a new world outright sailing speed record at Portland, UK.

An analysis of the crippling test applied to thin profiles is considered in this paper by using a standard tension test machine. Crippling tests are compression tests leading to crush collapse. This kind of tests cannot be properly performed in the standard test machine because of an inefficient transmission of the compression load to the specimen. To accomplish a more accurate test an improvement device is designed and modelled. This proposed device consists of four symmetrically-arranged guides joining the two machine heads.

The ability to accurately model welding processes in order to predict residual stresses and distortions is becoming increasingly important in the engineering industry. Abaqus can be used to model the welding process but this has been found to be considerably time consuming and requires a large number of assumptions to be made. Virtual Fabrication Technology is an analysis software suite that is designed to allow Abaqus to accurately model complex welding procedures. It was developed by the Battelle Memorial Institute in conjunction with Caterpillar Incorporated in the USA.

A unified framework is presented that enables coupled multiscale analysis of composite structures and associated graphical pre and post processing within the Abaqus/CAE environment. The recently developed, free, Finite Element Analysis - Micromechanics Analysis Code (FEAMAC) software couples NASA's Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC) with Abaqus/Standard and /Explicit to perform micromechanics based FEA such that the nonlinear composite material response at each integration point is modeled at each increment by MAC/GMC.

Finite element analysis (FEA) of a composite overwrapped pressure vessel (COPV) has traditionally been a tedious and time consuming task. FEA is often omitted in the development of many vessels in favor of a “build and burst” philosophy based only on preliminary design with netting analysis. This is particularly true for small vessels or vessels that are not weight critical. The primary difficulty in FEA of a COPV is the creation of the model geometry on the sub-ply level.

Turon’s methodology for determining optimal analysis parameters for the simulation of progressive delamination is reviewed. Recommended procedures for determining analysis parameters for efficient delamination growth predictions using the Abaqus/Standard cohesive element and relatively coarse meshes are provided for single and mixed-mode loading.

Structures in general are subject to uncertainty due to manufacturing, assembly, environment of work, loads, etc … This scatter more specifically is associated for example to tolerances of thickness, position, waviness, etc, material mechanical properties distribution, layup alignment axes. All these deviations can be taken into account with stochastic analysis to reduce the total cost of the project considering all the phases of product life (manufacturing, assembly, maintainability…) and make a global robust design.

Thermal Barrier Coatings (TBC) have been used for almost three decades for heat insulation in high-temperature components to increase efficiency. Reliable diagnostic techniques that are practical to implement are needed to identify the location and severity of degradation in TBCs to protect against premature TBC failure. Luminescence spectroscopy has been utilized in detecting early damage, as it exhibits monotonic changes in the spectral characteristics with damage. Nevertheless there is still no agreement on what are the best spectral parameters that indicate damage.

Bird impact damage in complex aircraft structure has been investigated using explicit transient dynamic analysis by Abaqus/Explicit in order to fully employ its large library of elements, material models and the ability of implementing user defined materials. The numerical procedure has been applied on the very detailed large airplane secondary structure consisting of sandwich, composite and metallic structural items that have been modeled with 3D, shell and continuum shell elements, coupled with appropriate kinematic constraints.