Hi all
i was performing 2D asymmetric analysis of rim mounting on tire.
i was using hybrid elements and the following error is appearing.
MAX. PENETRATION ERROR 265.670E-03 AT NODE 50327 OF CONTACT PAIR
(CARCASS-1_CONTACT,RIM-1_CONTACT)
MAX. CONTACT FORCE ERROR 7.46319E+03 AT NODE 10327 OF CONTACT PAIR
(CARCASS-1_CONTACT,RIM-1_CONTACT)
PENETRATION ERROR TOO LARGE COMPARED TO DISPLACEMENT INCREMENT.
AVERAGE FORCE 2.005E+03 TIME AVG. FORCE 2.005E+03
LARGEST RESIDUAL FORCE 1.672E+06 AT NODE 390905 DOF 3
LARGEST INCREMENT OF DISP. 7.98 AT NODE 200600 DOF 3
LARGEST CORRECTION TO DISP. 7.98 AT NODE 200600 DOF 3
FORCE EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.
AVERAGE MOMENT 5.771E+05 TIME AVG. MOMENT 5.771E+05
ALL MOMENT RESIDUALS ARE ZERO
LARGEST INCREMENT OF ROTATION 3.882E-31 AT NODE 303 DOF 5
LARGEST CORRECTION TO ROTATION 3.882E-31 AT NODE 303 DOF 5
THE MOMENT EQUILIBRIUM EQUATIONS HAVE CONVERGED
COMPATIBILITY ERRORS:
TYPE NUMBER EXCEEDING TOLERANCE MAXIMUM ERROR IN ELEMENT
VOLUMETRIC 49117 -5.251E-02 251468
NUMBER OF EQUATIONS = 200866 NUMBER OF FLOATING PT. OPERATIONS = 1.14E+12
Any kind of suggestions would be helpful.