User login

Navigation

You are here

Helen_SoftInWay's blog

Free Webinar: Retrofitting of Turbomachinery - from Scanned Data to a New Efficient Flow Path

SoftInWay has scheduled the next free webinar on turbomachinery retrofitting techniques used to increase efficiency using AxSTREAM. The webinar will be held on April 28, 2011, at 10 a.m. and 4 p.m. EST.

The SoftInWay team will present the full redesign process to the attendees: starting from analyzing scanned data and determining profile characteristics, followed with 1D/2D analysis of existing flow path, evaluation and selection of sections which require redesign and finally the design of new and efficient airfoils.

Free Webinar: Advanced Design of Multistage Centrifugal Compressor

SoftInWay announces a free webinar on advanced approaches to multistage centrifugal compressor design, to be held on Thursday, March 31, 2011, at 10 a.m. and 4 p.m. EST.

Multistage centrifugal compressors are widely used in gas pipeline systems and chemical industry. Defining optimal design parameters is critically important for saving energy at unit operation because these machines have high mass flow rate and significant total capacity.

Turbomachinery Design and Optimization with AxSTREAM 3.0: First Training in India

SoftInWay Turbomachinery Solutions Pvt. Ltd., an Indian subsidiary of SoftInWay Inc., proudly announces its first educational event in India: 5-day integrated training course on Axial Turbine Fundamentals and Turbomachinery Design and Optimization with AxSTREAM 3.0, to be held on January 17-21, 2011, in Bangalore, KA. The early-bird registered attendees will take advantage of a 33% discount (this offer is valid until December 24, 2010).

Free Webinar on Design of High Efficiency Steam Turbine in AxSTREAM

SoftInWay invites engineers to take part in free 1-hour webinar "Design of High Efficiency Steam Turbine in AxSTREAM" that will take place on Thursday, October 21, 2010, at 10 a.m. and 4 p.m. EST.

The webinar demonstrates the steps of steam turbine design on 1D/2D level, with particular focus on influence of different factors on turbine efficiency at the following stages of design:

- 1D Preliminary design and optimization: number of stages, geometrical and structural constraint

Turbine and Compressor Design: Online Training Schedule for July-December 2010

SoftInWay Inc. continues the online training series on turbomachinery design and announces the schedule for the second part of 2010:

Webinar on AxSTREAM 3.0: Design of Multispool Axial Compressor. From Specification to 3D Blade Design

On May 27, 2010, at 10 a.m. and 4 p.m. EST SoftInWay will hold free webinar "AxSTREAM 3.0: Design of Multispool Axial Compressor. From Specification to 3D Blade Design".

In the course of the 1-hour online presentation, the SoftInWay team will showcase the new features of AxSTREAM 3.0 for multispool compressors, namely:

Radial Turbomachinery Design: Free Webinar by SoftInWay

On April 15, 2010, at 10 a.m. and 4 p.m. EST SoftInWay will host free webinar "AxSTREAM Generation 3: New Features for Radial Turbomachines" that will showcase the new features of the AXSTREAM software suite for radial turbines and centrifugal compressors. The presentation is followed by an open forum where SoftInWay's experts will answer the attendees' questions.

The webinar's contents and screenshots are available at http://www.softinway.com/education/webinar.asp

Subscribe to RSS - Helen_SoftInWay's blog

Recent comments

More comments

Syndicate

Subscribe to Syndicate