Blog posts

crack closure tip model

Submitted by uni_students2009 on Wed, 06/09/2010 - 10:51

Hello, my question meaning that developed crack closure model can be explained the damage interaction among cycles of loads, is it right that each cycle has a own damage how can interpolate the overall dame in realistic as possible? which model do you suggested that can be contribute in this issue consider crack closure model?

ANIMATOR

Submitted by Nguyen Van Chau on Wed, 06/09/2010 - 10:02

education

ANIMATOR

ANIMATOR3 Online Help for Release 0.5.3, january 2000

Contents :

orientations of plies of composite plate in LS DYNA

Submitted by nazmtech on Tue, 06/08/2010 - 21:41

LS DYNA

hello im a M-Tech student..i need help regaring LS DYNA.i want to model a composite plate with the orientations[0/45/-45/90] i want apply the orientations and how to view the orientations of the plies. and i want know how to predict delaminations when it is impacted by a rigid ball...in LS DYNA..plz help me out

EFG Method using LS-Dyna

Submitted by puneetsoman on Tue, 06/08/2010 - 15:26

EFG

LSDYNA

Hello All,

I am a Masters Student trying to model a cyst in a Nerve for which i need to obtain large deformation(not displacement) which is not able to model with the help of Finite Element Tools(used Abaqus previously but no success).

I searched through the Internet and got to know that Meshless Methods are well known for Large Deformation.I found on the web that LSDyna has commercial code of EFG which i feel will be useul to me.

Stiffness matrix from ANSYS Classic

Submitted by rupika on Tue, 06/08/2010 - 09:10

research

stiffness

I want to get stiffnes matrix from ANSYS Classic. I used substructure analysis and using list->other-> super element data and got stiffness matrix of whole structure. But I want to get stiffness matrix of individual elements. Can I do it in ANSYS Classic?

SPH-EXPLOSIVE

Submitted by amiratrian on Tue, 06/08/2010 - 08:40

SPH

DEAR FRIENDS

IS IT POSSIBLE TO MODEL A METAL BLANK UNDER EXPLOSION USING SPH? (IN ORDER TO SIMULATE EXPLOSIVE FORMING OF A HEMISPHERE)

THANKS

Regarding abaqus

Submitted by Gurdeep Singh Mann on Mon, 06/07/2010 - 18:22

hello..can we install the abaqus software with window7...plz tell me...???

associate a pre-tension node with a pre-tension surface.

Submitted by fanying on Mon, 06/07/2010 - 14:00

HI! All

I am modeling a connection with pre-stressed bolts. When I run my job, it aborted: "Node set assembly__load-1_blrn_ has not been defined

A concentrated load has been specified on node set assembly__load-1_blrn_. This node set is not active in the model"

I think I don't know how to convert a pre-tension surface of bolt to pre-tension node.

Can someone help me to show it clearly?

Thanks alot.

PAnh

ABAQUS

Submitted by Manjesh on Mon, 06/07/2010 - 11:52

opinion

Hi everybody,

Can anybody tell me what is the difference between these two field outputs in ABAQUS?? First one is CPRESS and the other one is PRESSURE which comes under stress output??? Actually I want to know normal pressure for my work. Which one of these two will give me Normal pressure??? Thanks..