You are here
Carbon Nanotube in Ansys
dear all,
I want to do a research on carbon nano tube(CNT) using Ansys. I need to model CNT with matrice. How can I analyse this in Ansys? Is it possible in Ansys? Could you give any guide or reference for this ?
»
- W. Akram's blog
- Log in or register to post comments
- 12725 reads
Comments
dear all
since I am doing a same sort of research , I will highly appreciate it if you could give any points over it to me , thanks
CNT Modelling in ANSYS
Dear all,
Generally ansys is used to model CNT as a cage-like strecture using molecular stastics techniques. In this analysis , carbon atoms are considered as nodes and carbon-carbon bond is considered as an element ( Usually link, beam or frame elements are used).The element properties can be approximated from the standard potentials available.
If you want to analyze, CNT Composites, it is better to go for Multi Scale Models.
Sreenath.A.M
Asst. Professor
Mechanical Engineering Department
National Institute of Technology
Calicut,India
The following three papers
The following three papers demonstrate how to use FEM simulate carbon nanotues. Hope it help.
1. Liu B, Huang Y, Jiang H, Qu S, Hwang KC, (2004), The atomic-scale finite element method. Computer Methods in Applied Mechanics and Engineering 193 (17-20): 1849-1864.
2. Liu B, Jiang H, Huang Y, Qu S, Yu M-F, and Hwang KC, (2005), Atomic-scale finite element method in multiscale computation with applications to carbon nanotubes. Physical Review B 72(3): Art. No. 035435.
3. Chen YL, Liu B, He XQ, Huang Y, Hwang KC, (2010), Failure analysis and the optimal toughness design of carbon nanotube-reinforced composites. Composites Science and Technology, 70(9): 1360-1367.
Modelling of carbon nano tube(cnt) with matrix in ANSYS APDL
Dear all,
I am doing research on 'failure analysis of CNT based composite
using FEA'. I have modelled cnt in ansys with manual meshing but it is
terminating the solution giving error as "One or more elements
have become highly distorted. Excessive distortion of elements is
usually a symptom indicating the need for corrective action elsewhere.
Try incrementing the load more slowly (increase the number of substeps
or decrease the time step size). You may need to improve your mesh to
obtain elements with better aspect ratios. Also consider the behavior
of materials, contact pairs, and/or constraint equations. If this
message appears in the first iteration of first substep, be sure to
perform element shape checking"
Can anyone tell me how to solve this problem
Nilesh Patil
student: M.Tech
Indian Institute of technology,Guwahati
modelling of carbon nanotube with matrix in ansys apdl
Dear all,
I am doing research on 'failure analysis of CNT based composite using FEA'. I have modelled cnt in ansys with manual meshing but it is terminating the solution giving error as "One or more elements have become highly distorted. Excessive distortion of elements is usually a symptom indicating the need for corrective action elsewhere. Try incrementing the load more slowly (increase the number of substeps or decrease the time step size). You may need to improve your mesh to obtain elements with better aspect ratios. Also consider the behavior of materials, contact pairs, and/or constraint equations. If this message appears in the first iteration of first substep, be sure to perform element shape checking"
Can anyone tell me how to solve this problem
Nilesh Patil
student: M.Tech
Indian Institute of technology,Guwahati