Dear Colleagues,
I am glad to share my papers on MD simulation and multiscale moldeling of polymer based nanocomposites.
MD simulation of graphene-epoxy nanocomposites:
Hi,
I started a research project on Impact problem of nonlinear beam (all kind of nonlinearity). Has anyone studied on this issue? Please give me some reference or direction. It will be a great help. Thank a lot
Best regards.
Tien Long
Hi,
I am currently modeling an electrothermal actuator.
I want to see the displacement that a device can generate when I apply a voltage difference between its ends.
First, I run a coupled thermal-electric simulation and got the temperature profile. Finally, I run a Static, general analysis to get the displacements, using the temperature profile as a Predefined Field.
The first version of NanoCap has been released and is free to download on Sourceforge:
https://sourceforge.net/projects/nanocap/
A tool for generating atomic coordinates for capped nanotubes and fullerenes.
Full description:
Professor John Rogers is the recepient of the Robert Henry Thurston Lecture Award this year, and he will give the Thurston Lecture at 10am on Monday, November 18 during the ASME IMECE 2013. The location is the Elizabeth Ballroom (section H), 2nd floor at the Manchester Grand Hyatt.
Multiple Phd. positions are available in the area of computational solid mechanics with an emphasis on multiscale modeling of polymer nanocomposites, high strain rate characterization of novel nanocomposite materials, in Mechanical Engg. Dept. in North Carolina A & T State University. Interested candidates are encouraged to communicate via email to tsain [at] ncat.edu and/or mannur [at] ncat.edu
Hello everyone.. Consider a cantilever for sequential load steps in abaqus.
Fist step I want to apply imposed displacement of 2mm at free end.
2nd step I want impose +/-6mm Z displacement at free end (total 3
cycles. (One cycle= +6 and -6 mm in z direction)
Can somebody let me know how to do this. how to define two steps ?
Thank you in advance
Vasant
Dear colleagues,
I have one question concerning the TSHR (transverse shear stresses) output request in application of Thick Shell S8R elements in Abaqus/standard.
the follow qarning occurs: Output request tshr is not available when *transverse shear stiffness is specified on the *shell section definition or a material in the shell has been defined without *elastic
Can anybody please help with an advioce or two, on how to solve this?
all the best
