Hightlights of this open access article published in Building and Environment:
• Building stock models need to revise some of their assumptions on space heating.
• Weekends and weekdays are similar in their heating pattern and duration.
• Estimated heating demand temperature is slightly lower than the assumed 21 °C.
• Homes differ widely in their hours of heating and their demand temperature.
Dear all
i have question that i woud like to know about principle of putting monetary value on human to rduce risk and the principle of weighting the importance of risk , moreover is there any conflic between these principle
regards
Sixth International Conference on Engineering Failure Analysis
6 – 9 July 2014, Lisbon, Portugal
I am trying to measure J - integral from experiment. " Let my initial fatigue crack length is 6mm, then i did single specimen unloading compliance test on it. The crack legth increased to 8mm" If i want to model the same geometry in FEA. Now my doubt is that "what carck length should i take 1) Initial fatigue crack = 6mm 2) final crack length = 8 mm.................... Note: I need to model my CT specimen in FEA to correct my experiments :-)
hi im prasath now im a CAE trainee. i want to know more about CAE analysis what are the necessary things i've to learn and experienced in this field?...
Hello everyone,
I am currently in the process of implementing a multiscale modeling approach in ABAQUS/Standard.
Here is what I am doing.
Macroscale ABAQUS model <--> UMAT <--> Python script <--> Microscale ABAQUS model
So basically the microscale model is being called at every macroscale integration point. The UMAT passes the required data to python as command line arguments and the python script returns the stress and tangent modulus in a text file.
The Institute for General Material Properties of the Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) is seeking an outstanding PhD candidate to participate in a research-training group on in-situ microscopy on nanoscale objects.
Dear Colleagues,
we are organizing a symposium on Plasticity and Fracture in Inorganic Amorphous Materials at
Condensed Matter in Paris 2014
to be held August 23 to 29, 2014.
Your experimental or theoretical contributions are highly welcome.
Please don't hesitate to contact us for more information.
The deadline for abstract submission is April 1st 2014.
Looking forward to seeing you in Paris in August,
Y. S. Chen, W. Choi, S. Papanikolaou, M. Bierbaum, J. P. Sethna
Hi,
I want to try abaqus ductile damage model to simulate steel
failure in Abaqus. I read the manual, and have some ambiguities regarding its parameters.
Is there somebody to have experiences in ductile damage to share?
Thanks.
