Blog posts

Dear everyone,

I try to run one case study that I got from Abaqus Verification Manual (4.1.37 Vumat : Rotating Cylinder).

But it doesn’t work, it always show an error ‘Node set assembly__m22 has not been defined’.  

Can anyone please tell me how to fix this error?

I have already attached the inp-file and subroutine-file with this post.

(The present Abaqus version that my university use are 6.10 and 6.11) 

Thank you very much indeed.

Hello every ,

 I hope you are all fine. Evne though I know no one is going to help me including God , but i am still gonna ask for some help please please please.

hello

i am using ansys for simulate the crack propagation with czm modeling using interface element

and compare this result with result of beam theory but the result can't match togeather.

please send to me any opinion about the input factor in czm modeling for metal.

email: hhabnn [at] gmail.com

thanks

Hello all,

I am really thankful for any help . I am in a very bad situation with my research project because of Abaqus, so please if you know what is wrong with my model please help me please.

I have a pile 200mm long..diameter = 50 mm.. the pile embedded in sand... the depth of sand layer =450mm.. other dimensions are L= 960mm,, W= 480mm.

the pile fully embedded in the soil.. on the top it is connected to a pulling arm , the length of the pulling arm =330 mm , the diameter = 25mm..

the pile is laterally loaded so it is a 3D problem

I have problem with linking the visual studio, fortran and ABAQUS. Is there anybody who can help me?

Hello everybody

Hello all...,

                 I want to know the method of getting convergence when a Soft body and a Stiff body is in contact and a large force is acting normal to the contact interface. I am actually facing this problem often.

Anybody pls help...

Ravi