You are here
Cutting Mica Sheet
Hi iMechanica,
I am not sure if I can post this type of primitive questions here, but hope you wouldn't mind. I have a 1'' by 3'' mica sheet, and it needs to cut hopefully without cracks. I searched on available papers but could not find one that described how a cut with hot-wire configuration was made of. (closest call was "Platinum Nanoparticles at Mica Surfaces" by Zhiqun Lin and Steve Granick). If you have an experience on cutting mica for your research, could you please share with me about how you set up cutting tools or another simpler method? I have a platinum wire (d = 0.2mm), but do not have anything else at this moment.
Sincerely,
Masa
Does the silicon wafer dicer serve your purpose?
Dr. Paul Ho's lab has it.
Thanks
Hi Mingji,
Thank you for your comments. We have a dicer at newly built nano center, but dicer won't work this case...
I came up with a simple design and should be tested as soon as machining be completed. Again, thank you for your support.
Experiences on mica cutting
Hi, masa
I am not sure whether your problem has been solved or not. I had some experiences before on mica cutting, hope it will be usefule for you.
The problme for cutting mica mechanically is that cracks always exist along the edges. One way I found that could effectively prevent this cracking was to utilize a sandwich structure. Glue your mica sheet between two microscope cover slides using some removable or dissolvable adhesives (I used thermo-sensitive glue, it worked great). Next thing is to find a cutting tool (e.g. a diamond saw) to cut the "sandwich" into any shape you want. After cutting, simply dissolve the adhesive to remove the glasses. The mica sheet could be further cleaved if you want an atomically flat & clean surface.
Qunyang
Thank you
Hi Qunyang,
You are absolutely correct on the crack on the edges. I belive I can use a diamond saw at room 101. I am wrapping up mica cutting device, but if that fails, I'll try your method.
Thank you for a good suggestion.
Masa