iMechanica

The 9th US National Congress on Computational Mechanics will feature a student presentation competition. This competition continues in the format pursued at the recent World Congress in Los Angeles. It is open to students who have an abstract accepted for presentation at the Congress.

Hello everyone,

I had previously posted this entry on the AMD blog and perhaps it worthwhile to post it again on this forum. I would like to solicit feedback and comments on an idea to further enhance the role and utility of iMechanica.

This inspiration comes from Bell labs and the physics community.....

They started a journal club (year 2003). Each month ONLY 2-3 already published recent journal papers are reviewed and commentary posted in the form of a newsletter. Since only 2-3 papers are reviewed, the selection is much more stringent and careful. The contribution is regular and periodic (monthly). Hence, this newsletter is taken seriously by physicists.

In our case, this can be done within iMechanica. I suspect we could achieve the same kind of interest if we restrict "notable" papers to 1-3 per month and make it a regular monthly feature. In principle anyone could submit a commentary but the blog moderators will select the top 2-3.

The operational rules are open for discussion. Briefly though, I am thinking on the lines of rotating 1-2 moderators with a term of say 2 months. The moderator will receive commentaries on recently published papers RELATED to mechanics area. The moderator will highlight 1-3 notable commentaries in the journal club newsletter. A key requirement must be that the commentaries/paper highlighted are related to mechanics in some form or the other. The concept of rotating moderator is to provide breadth and prevent bias of any one individual. Rotation of journal club moderators will also keep the "work-load" well distributed.

Perhaps a post has already been made in this regard; A book containing all the papers by J.D. Eshelby was recently released by Springer. This book is compiled by Markenscoff and Gupta. Congratulations to both of them for such a great idea!

I bought this book last week and it is fascinating to read all of Eshelby's papers in chronological order. Furthermore, I found a few papers that I had not even been aware of. The price, at roughly $195 on Amazon is a bit steep but (in my opinion) well worth it. The book also contains forewords by several researcher who knew Eshelby personally.

Here is the amazon link to this book

by S. Yip (Editor), 2005

Book Review
"A new guide to materials modeling largely succeeds in its aim to be the defining reference for the field of computational materials science and represents a huge undertaking..." -- by James Elliott | University of Cambridge, Materials Today, Volume 9, Issues 7-8, July-Aug 2006, Pages 51-52.

Book Description
The first reference of its kind in the rapidly emerging field of computational approachs to materials research, this is a compendium of perspective-providing and topical articles written to inform students and non-specialists of the current status and capabilities of modelling and simulation. From the standpoint of methodology, the development follows a multiscale approach with emphasis on electronic-structure, atomistic, and mesoscale methods, as well as mathematical analysis and rate processes. Basic models are treated across traditional disciplines, not only in the discussion of methods but also in chapters on crystal defects, microstructure, fluids, polymers and soft matter. Written by authors who are actively participating in the current development, this collection of 150 articles has the breadth and depth to be a major contributor toward defining the field of computational materials. In addition, there are 40 commentaries by highly respected researchers, presenting various views that should interest the future generations of the community. Subject Editors: Martin Bazant, MIT; Bruce Boghosian, Tufts University; Richard Catlow, Royal Institution; Long-Qing Chen, Pennsylvania State University; William Curtin, Brown University; Tomas Diaz de la Rubia, Lawrence Livermore National Laboratory; Nicolas Hadjiconstantinou, MIT; Mark F. Horstemeyer, Mississippi State University; Efthimios Kaxiras, Harvard University; L. Mahadevan, Harvard University; Dimitrios Maroudas, University of Massachusetts; Nicola Marzari, MIT; Horia Metiu, University of California Santa Barbara; Gregory C. Rutledge, MIT; David J. Srolovitz, Princeton University; Bernhardt L. Trout, MIT; Dieter Wolf, Argonne National Laboratory.

The McMat 2007 conference, organized by the University of Texas on behalf of the Applied Mechanics and the Materials Divisions of the ASME, will be held in Austin, June 3-7, 2007.

We are now accepting proposals for symposia and abstracts of papers.

Jun He and Guanghai Xu (Intel Corporation)

Zhigang Suo (Harvard University)

USNCCM IX, July 22 - 26, 2007
Pre- & Post-Congress Short Courses, July 22 & 26, 2007
Hyatt Regency San Francisco
San Francisco, California

BACKGROUND AND SCOPE
From their inception in 1991, the biennial congresses of the United States Association for Computational Mechanics have become major scientific events, drawing computational engineers and scientists worldwide from government, academia, and industry. The Ninth U.S. National Congress on Computational Mechanics (USNCCM IX), hosted by the University of California, Berkeley, will feature the latest developments in all aspects of computational mechanics, and will broaden the definition of the discipline to include many other computation-oriented areas in engineering and sciences. From applications in nanotechnology and bioengineering, to recent advances in numerical methods and high-performance computing, the technical program will reflect the Congress theme of "Interdisciplinary Computation''. In addition to plenary lectures and minisymposia that highlight the latest trends in computational mechanics, pre- and post-conference short courses addressing advances in multiscale and multiphysics methods, as well as other topics, will be held. Numerous vendor exhibits from Bay Area and national companies and organizations are also planned. Detailed information on USNCCM IX can be found at:
http://me.berkeley.edu/compmat/USACM/main.html

I like to keep the mindset of being a student, learning from all sources on all topics I am interested. Recently I have learned quite a lot about mechanics and mechanicians from Applied Mechanics News and its sister blogs and now iMechanica.

With a job as an assistant professor, I always try to motivate my students to become future mechanicians. For this reason, I started Modeling Place as a group blog in January and gently forced my students to participate. Out of the five students I have, two actively participate by posting frequently, two occasionally post, and one dropped out quickly after one post. Together, the blog has been doing reasonably well, in terms of both quantity and quality of posts.

I learned a few tricks in handling images and got to know some interesting works in the general area of mechanics. How about the students? What benefits have they received? I have to ask them. For one, I awarded one student with a little gift as the best post of the semester. More importantly, I believe that they are reading more than they used to do, thus gaining broader knowledge and interest in mechanics and related science. They not only read the posts in the blog but also read from other sources (online or not) to find something to post. Furthermore, they have a place to practice writing. It is a big step from reading to writing, not only for foreign students I think.

It may be still too soon to tell how well this works, but the students themselves should be able to tell us more. If you are a student, I encourage you to comment on this to tell the professors what you like or don't like about iMechanica. At this stage of development, much more features and benefits can be accomodated. Your ideas could shape the future of iMechanica and benefit all students and those considering themselves as students of life.

Nanocomposite performance fundamentally relies on reproducible dispersion and arrangement of nanoparticles, such that the dominate morphology across macroscopic dimensions is also nanoscopic. To facilitate dispersion, chemical approaches, including surfactant or macromolecular stabilization are usually employed to modify the surface of nanoparticles. However, the approach depends on the material system and usually involves trial-and-error to identify the best practice. Much less quantitative information is available on the coupling between the surface modification and external processing factors, including shear, electric or magnetic fields. In a recent work, we considered electric field on the interaction of nano-plates. For ideal dielectrics an electric field may assist (or retard) exfoliation depending on the angle between a collection of plates and the field. A critical electric field strength to promote exfoliation is predicted when the field is parallel to the surface of the plates. Structural refinement is predicted to occur by cleavage through the center of the stack. For lossy dielectrics, frequency can be tuned to cause exfoliation in all plate orientations.

Here is the website for the 2006 ASME Congress. For the applied mechanics program, click "Program Overview", then choose "Applied Mechanics" from the list of topics.

Professor Rodney Ruoff and colleagues at Northwestern University and Purdue University have developed a process that promises to lead to the creation of a new class of composite materials - graphene-based materials. They reported the results of their research in Nature, 442 (2006) 282-286. This team has overcome the difficulties of yielding a uniform distribution of graphene-based sheets in a polymer matrix. Such composites can be readily processed using standard industrial technologies such as moulding and hot-pressing. The technique should be applicable to a wide variety of polymers. The graphene composites may compete with carbon nanotube-based materials in terms of mechanical properties. This new class of composites may stimulate the applied mechanics community to study the fundamental reinforcing mechanisms of graphene sheets from both experimental and theoretical approaches.

You are cordially invited to participate in the Symposium on the Mechanics of Electromagnetic Materials and Structures, the 5th International Conference on Nonlinear Mechanics (ICNM-V), to be held in Shanghai, China, June 11-14, 2007.  You may find more information at the website of the conference.

The symposium topics include piezoelectricity, ferroelectricity, magnetoelasticity, electromagnetic fluids and various applications in engineering and technology, but are not limited to the above. Experimental, theoretical, and computational studies are all welcome.

Please e-mail your one-page abstract(s) to any of us listed below. We look forward to hearing from you. If you have any questions, please do not hesitate to contact us at

Professor Ji Wang, Ningbo University, wangji@nbu.edu.cn

Professor Yuantai Hu, Central South University, hudeng@263.net

Professor Jiashi Yang, University of Nebraska, jyang1@unl.edu

Professor Daining Fang, Tsinghua University, fangdn@tsinghua.edu.cn

Submission of abstract: as soon as possible.

Notification of acceptance: Nov. 1, 2006

Submission of final paper(s) for the conference proceedings: Jan. 1, 2007

A vicinal Si (001) surface may form stripes of terraces, separated by monatomic-layer-high steps of two kinds, SA and SB. As adatoms diffuse on the terraces and attach to or detach from the steps, the steps move. In equilibrium, the steps are equally spaced due to elastic interaction. During deposition, however, SA is less mobile than SB. We model the interplay between the elastic and kinetic effects that drives step motion, and show that during homoepitaxy all the steps may move in a steady state, such that alternating terraces have time-independent, but unequal, widths. The ratio between the widths of neighboring terraces is tunable by the deposition flux and substrate temperature. We study the stability of the steady state mode of growth using both linear perturbation analysis and numerical simulations. We elucidate the delicate roles played by the standard Ehrlich-Schwoebel (ES) barriers and inverse ES barriers in influencing growth stability in the complex system containing (SA+SB) step pairs.

Preprint available in the attachment.

Ting Zhu, Ju Li, Amit Samanta, Hyoung Gyu Kim and Subra Suresh

Nano-twinned copper exhibits an unusual combination of ultrahigh strength and high ductility, along with increased strain-rate sensitivity. We develop a mechanistic framework for predicting the rate sensitivity and elucidating the origin of ductility in terms of the interactions of dislocations with interfaces. Using atomistic reaction pathway calculations, we show that twin boundary (TB) mediated slip transfer reactions are the rate-controlling mechanisms of plastic flow. We attribute the relatively high ductility of nano-twinned copper to the hardenability of TBs as they gradually lose coherency during deformation. These results offer new avenues for tailoring material interfaces for optimized properties.

see the attached pdf file

Our first paper in biomechanics is featured as the cover of the Biophysical Journal. The paper is attached. Several freelance writers in biophysics have reported this paper in magazines and websites/blogs. This framework is very versatile and powerful, and we are now implementing more details/atomistic features into this phenomenological approach, and the follow-up paper will be submitted soon.

Abstract: The gating pathways of mechanosensitive channels of large conductance (MscL) in two bacteria (Mycobacterium tuberculosis and Escherichia coli) are studied using the finite element method. The phenomenological model treats transmembrane helices as elastic rods and the lipid membrane as an elastic sheet of finite thickness; the model is inspired by the crystal structure of MscL. The interactions between various continuum components are derived from molecular-mechanics energy calculations using the CHARMM all-atom force field. Both bacterial MscLs open fully upon in-plane tension in the membrane and the variation of pore diameter with membrane tension is found to be essentially linear. The estimated gating tension is close to the experimental value. The structural variations along the gating pathway are consistent with previous analyses based on structural models with experimental constraints and biased atomistic molecular-dynamics simulations. Upon membrane bending, neither MscL opens substantially, although there is notable and nonmonotonic variation in the pore radius. This emphasizes that the gating behavior of MscL depends critically on the form of the mechanical perturbation and reinforces the idea that the crucial gating parameter is lateral tension in the membrane rather than the curvature of the

The ASME International Mechanical Engineering Congress and Exposition (IMECE) will be held in 11-16 November 2007, in Seattle, Washington. As the 2007 Program Chair of the Applied Mechanics Division (AMD), I hope to get you involved in planning activities at the Congress.

IMECE is a place where you can meet people and attend talks in Applied Mechanics, as well as in other fields, such as Materials, Electronic Packaging, Tribology, and Heat Transfer. For many mechanicians, a highlight of the Congress is the Applied Mechanics Annual Dinner, where old acquaintances are resumed, new friends made, awards announced, and the Timoshenko lectures delivered.

[img_assist|nid=46|title=|desc=|link=url,http://www.materialstoday.com/2006_issues/april.htm|align=right|width=75|height=100]The cover story of the April 2006 issue of Materials Today features Flexible Electronics. This issue also includes two review articles in this emerging field of research. Access to full text articles is free of charge at http://www.materialstoday.com.

Review Article:

Material challenge for flexible organic devices, by Jay Lewis

Review Article:

Organic and polymer transistors for electronics, by Ananth Dodabalapur

Cover Story:

Jet printing flexible displays, by R.A. Street et al.

We've been hearing rumors that print is dead, killed by the Internet. What is the reality then? For example, how are newspapers doing? Not too badly, according to the numbers cited by James Surowiecki, of The New Yorker. He also made the following remarks, however.

"The popular conviction that papers are doomed may cause owners and shareholders to prefer the cash-cow approach, accepting eventual oblivion while continuing to harvest billions of dollars in profits. Settling for a tolerable short-term future, newspapers could end up writing themselves out of the long-term one. Yet it’s also clear that this moment of supposed doom represents a sizable opportunity for newspapers, a chance to reinvigorate their product and, eventually, improve the economics of their business."