Blog posts

Dear All,

As a part of my PhD project I need to implement the tangent stiffness matrix of a 2D beam co-rotational formulation.

 So I will apreciate if somebody can show me the components (coefficients)  of the element tangent stiffness matrix.

Thanks in advance

Arturo 

The 8th European Conference on Constitutive Models for Rubbers (ECCMR VIII) will be held at Tecnun/CEIT (San Sebastian, Spain) between June 25th and June 28th, 2013.

My thermal simulation in the alternator required convective coefficient . Presently i have computed convective coefficient for stator,rotor,rectifier assembly by thermal testing at steady state condition. I have completed thermal simulation for these components of the alternator . Next, i want to perform thermal simulation for entire alternator.Is there anybody, provide me guidance to formulate correlation between geomentry,ambient condition,convective flim coefficient.Further, i have to model contact among components in the alternator. it requires thermal contact conductance.

I WOULD LIKE TO LEARN ABACUS . KINDLY PROVIDE YOUR VALUABLE GUIDANCE.

(http://www.renewableenergyworld.com/rea/tech/geothermal-energy) This is a very clean, environmentally friendly and sustainable energy source. It is the heat from the earth crust. The heart of the earth is about 12000 degrees farenheit_{. Geothermal systems tap into this inexhaustive though not generally available} energy source_. Example is  Reykjavik the capital of Iceland which islocated near hot springs.

Two Graduate Research Assistantship
positions are currently available in the Multiscale Materials Modeling
Group to support graduate study leading to a PhD in Materials Science
and Engineering at the University of Connecticut starting Spring/Fall 2013.