User login

Navigation

You are here

PHD position

Bent F. Sørensen's picture

PhD scholarship in experimental and modelling study of the composite pultrusion process for manufacturing of pre-fabricated elements for wind turbine blades

The Section for Composites and Materials Mechanics, DTU Wind Energy, is seeking a PhD student for an experimental and modelling study of the composite pultrusion process for manufacturing of pre-fabricated elements for wind turbine blades. The PhD scholarship is part of the OPTI_MADE_BLADE project funded by the Innovation Fund Denmark. The project targets the development of design and manufacturing solutions for large (>70m) offshore wind turbine blades.

 In the assessment of the candidates, consideration will be given to:

mohsenzaeem's picture

Two PhD positions are available immediately in Computational Materials & Mechanics

Two PhD positions are available immediately in the Computational Materials & Mechanics Laboratory at Missouri University of Science and Technology (Rolla), http://web.mst.edu/~aslezaeemm/.

The project is about multi-phase field modeling of formation and evolution of intermetallics and oxides at high temperatures. 

 

Candidates should have a master's degree in materials science and engineering, mechanical engineering, solid-state physics, or applied mathematics. A background in phase field modeling is desired.

PhD Position in Computational Multiscale Modelling of Bone Fracture Healing Mechanobiology

The Laboratory for Bone Biomechanics of Prof. Ralph Müller, Department of Health Science & Technology, Institute for Biomechanics at ETH Zurich is offering a 

PhD Position in Computational Multiscale Modelling of Bone Fracture Healing Mechanobiology

moorekwesi's picture

Positions for PhD students and postdoctoral researchers

 

Positions for PhD students and postdoctoral researchers
at the Institute of Applied Geometry, JKU, Linz, Austria

 

 The Institute of Applied Geometry at Johannes Kepler University
(www.ag.jku.at) has vacant positions for PhD students and
postdoctoral researchers. Applicants should possess a background
in geometric modeling, computational geometry or numerical analysis.

 

Vladislav Yastrebov's picture

PhD position in computational contact mechanics

We are looking for a student to work on the topic "Development of advanced numerical methods in contact mechanics for aerospace applications"

Davide Bigoni's picture

Marie Curie PhD position at University of Trento (Italy): deadline June 30

Please, give a look to my research activity at http://www.ing.unitn.it/~bigoni and to my group at http://ssmg.unitn.it

If you are strongly motivated to work with a very active group in Solid Mechanics, we have a PhD position (3 years) available from November 2014, but the deadline for application is June 30, 2014!

The position is on a EU grant and is addressed to numerical/theoretical modelling of ceramics.

For details on the application see the attachment.
 

Lifeng Wang's picture

PhD Position Available in Multifunctional Composite Materials

One PhD position is available immediately in the Department of Mechanical Engineering at Stony Brook University, NY, US.  The research program focuses on the mechanics and multifunctional applications of 3D periodic composite materials including shape memory, acoustic/elastic wave propagation, and energy harvesting. The candidates with background in solid mechanics and finite element analysis are highly encouraged to apply. 

Angelo Simone's picture

PhD position in Computational Mechanics at TU Delft

Applications are invited for a PhD position (four years) in the area of computational modelling in the Computational Mechanics of Materials group of the Faculty of Civil Engineering and Geosciences at Delft University of Technology in the Netherlands. More information can be found below.

 

Computational material design and characterization of ceramics for ballistic protection

Siva P V Nadimpalli's picture

PhD position in Experimental Solid Mechanics at the New Jersey Institute of Technology

There is an opening for a
PhD student position in Dr. Nadimpalli’s group at the New Jersey Institute of
Technology starting from Fall2014. Candidate with good academic credentials and an interest to work in experimental research projects are encouraged to apply.
Ideal candidate should have a master’s degree in mechanical/materials
science/aerospace or related field with a good background in Solid Mechanics,
Materials Science, and Experimental Methods (including but not limited to SEM,
TEM, and nanofabrication methods).

pooria pasbakhsh's picture

PhD position at Monash University Malaysia

One PhD student position is available at Monash University Malaysia on mechanical properties of epoxy nanocomposites. 

 

 We expect students with the knowledge and experience in at least two of the following skills:

1- Polymer composites:Processing and characterization

2- Fracture mechanics of nanocomposites

3- Self-healing 

 

pooria.pasbakhsh@monash.edu

Davide Bigoni's picture

Marie Curie PhD position at University of Trento (Italy): deadline September 15

Please, give a look to my research activity at http://www.ing.unitn.it/~bigoni and to my group at http://ssmg.unitn.it

If you are strongly motivated to work with a very active group in Solid Mechanics, we have a PhD position (3 years) available from January 2014, but the deadline for application is September 15, 2013!

The position is on a EU grant and is addressed to numerical/theoretical modelling of ceramics.

For details on the application see the attachement.
 

PhD opportunities at recently funded a €25 million Centre for Marine Renewable Energy Ireland (MaREI).

5 PhD Opportunities in Composite Materials and Structural Testing in Marine Renewable Energy

The PhDs are being funded at the National University of Ireland, Galway as part of the SFI Marine Renewable Energy Ireland (MaREI) Centre, starting from September/October this year.

The positions are as follows:

1. Application of Low-Cost, High Performance Thermoset Materials to Marine Renewable Energy Device Structures

Patrick Onck's picture

PhD position available at the University of Groningen, The Netherlands

A four-year computational Ph.D. position on "MD modelling of unfolded proteins in aging nuclear pores" is available at the University of Groningen, The Netherlands.

G. A. Holzapfel's picture

Two PhD Positions in Biomechanics, Graz University of Technology, Austria

 Two PhD positions (each for 4 years, to fill this year)

  1. Computational Biomechanics (modeling and simulation) of biomechanical systems from the cellular to the tissue level; implementation of algorithms and material models into finite element codes such as FEAP
  2. Experimental Biomechanics; mechanical/optical investigations of soft biological tissues at the macro and microscopic level

Payment: the monthly minimum gross salary for this employment is EUR 2,562.00 (14x per year)

soheilsoghrati's picture

PhD Position in Computational Modeling of Materials at The Ohio State University

The Automated Computational Mechanics Laboratory (ACML) in the Department of Mechanical and Aerospace Engineering at The Ohio State University has one open PhD position for Spring 2014.  The research in ACML is focused on the implementation of advanced finite element and meshfree methods for the computational modeling of materials with complex geometries, corrosion, damage/fracture mechanics, and multi-physics simulations.

PhD positions at the Department of Mechanical Engineering at Politecnico di Milano

The Department of Mechanical Engineering at Politecnico di Milano is
currently seeking applicants for PhD positions in the following research areas:

1- Dynamics and Vibration of Mechanical Systems and Vehicles
2- Machine and Vehicle Design
3- Manufacturing and Production Systems
4- Methods and Tools for Product Design
5- Materials
6- Measurements and Experimental Techniques
7- Smart Materials and Structures

Vladislav Yastrebov's picture

PhD position "Carbone interphases in SiC/SiC composites"

We are looking for PhD candidates to study interfaces in SiC/SiC fiber composites. The project is in collaboration with CEA and Centre des Matériaux, MINES ParisTech under the supervision of Marie-Hélène Berger (MINES ParisTech), Cédric Sauder (DMN/SRMA/LTMEX) and Sylvie Poissonnet (DMN/SRMP).

Title : "Influence of Carbone interphases in SiC/SiC composites based on Hi-Nicalon S and Tyranno SA3 fibers"

Abstract

Laura De Lorenzis's picture

PhD and Post-Doc positions in Computational Mechanics at the Technische Universität Braunschweig, Germany

PhD and Post-Doc positions are now available at the Institut für Angewandte Mechanik of the Technische Universität Braunschweig, Germany. Both are full-time fixed-term positions for 2 years with the possibility of renewal.

PostDoc position / PhD position

The Helmholtz-Institute of Materials Research in Geesthacht, Germany, invites applications for a Scientific researcher m/f.
The position is initially limited for one year with the possibility of an additional three-year-extension (starting as soon as possible).

PhD Studentship: In-situ quantification of interphase stress during martensitic transformations, Open University, UK

Fully funded PhD studentship at The Open Univeristy campus, Milton Keynes, UK. The aim of this project is to optimise experimental techniques such as digital image correlation (DIC) and focused ion beam (FIB) hole drilling to investigate the micro scale stresses and strains occurring during martensitic transformations. The techniques will be applied to a range of materials from simple steels to complex shape memory alloys. There will also be scope within the project to study martensitic alloys using central facilities such as the ILL, ESRF and Diamond light source.

Octavio A. González Estrada's picture

Initial Training Network (FP7) position in Computational Mechanics at CENAERO, Belgium

Marie Curie Fellows in Computational Mechanics

Cenaero has an opening for a position under an EU Marie-Curie
Initial Training Network (Call: FP7-PEOPLE-2011-ITN) on "Integrating
Numerical Simulation and Geometric Design Technology" (INSIST).

Description

Octavio A. González Estrada's picture

Initial Training Network (FP7) position in Computational Mechanics at CENAERO, Belgium

Marie Curie Fellows in Computational Mechanics

Cenaero has an opening for a position under an EU Marie-Curie
Initial Training Network (Call: FP7-PEOPLE-2011-ITN) on "Integrating
Numerical Simulation and Geometric Design Technology" (INSIST).

Description

Pages

Subscribe to RSS - PHD position

Recent comments

More comments

Syndicate

Subscribe to Syndicate