cohesive zone model

Hello! 

As a student who has spent a lot of time studying cohesive zone models in fracture mechanics, I have several questions that have bothered me over the past year or so, and I have not been able to find suitable answers to them. I am limiting myself here to questions related to the traction-separation law, which invariably forms the basis of CZM as it is implemented today. I am raising these questions in the hope that I can receive some response here, even if it means my question is invalid (as I suspect a few may be).  So here is my list:

----- 

With the increasing use of shape memory alloys in recent years, it is important to investigate the effect of cracks. Theoretically, the stress field near the crack tip is unbounded. Hence, a stress-induced transformation occurs, and the martensite phase is expected to appear in the neighborhood of the crack tip, from the very first loading step. In that case, the crack tip region is not governed by the far field stress, but rather by the crack tip stress field. This behavior implies transformation toughening or softening.

This is a paper that has been accepted for publication in the Journal of the Mechanics and Physics of Solids from our group. The paper describes the combined effect of material inertia and inhomogeneous material property variation on spontaneous cohesive-crack propagation in functionally graded materials. The preprint is attached as a PDF.

Abstract- The effects of combining functionally graded materials of different inhomogeneous property gradients on the mode-3 propagation characteristics of an interfacial crack are numerically investigated. Spontaneous interfacial crack propagation simulations were performed using the newly developed spectral scheme. The numerical scheme derived and implemented in the present work can efficiently simulate planar crack propagation along functionally graded bimaterial interfaces. The material property inhomogeneity was assumed to be in the direction normal to the interface. Various bimaterial combinations were simulated by varying the material property inhomogeneity length scale. Our parametric study showed that the inclusion of a softening type functionally graded material in the bimaterial system leads to a reduction in the fracture resistance indicated by the increase in crack propagation velocity and power absorbed. An opposite trend of increased fracture resistance was predicted when a hardening material was included in the bimaterial system. The cohesive tractions and crack opening displacements were altered due to the material property inhomogeneity, but the stresses ahead of the cohesive zone remained unaffected.