Fully funded PhD position at Polytechnique Montréal in collaboration with Safran
Positions summary
Blog posts
MASTER OF APPLIED SCIENCE (MASc) POSITION IN CANADA: FEA, Composites
Looking for MSc student to take part in computational and/or experimental research in the areas of composite materials and impact mechanics.
Institution: University of Windsor, Canada
Start date: January 2019 or spring 2019
Preferred qualifications:
International Joint Conference on Robotics, Automation and Mechatronics -JCRAM 2018
On December 12-14, 2018 International Joint Conference on Robotics, Automation and Mechatronics (JCRAM 2018 www.jcram.org) will be held in Wellington, New Zealand. The conference is organized by IASED (International Academy of Science and Engineering for Development, www.iased.org) and technical supported by many university and institute.
The contact information is as follows:
Carrie Kit Tsui
Conference Managing Director
Two Fully-funded PhD Positions in Additive Manufacturing
The National Center for Additive Manufacturing Excellence (NCAME) at Auburn University is announcing for two fully-funded PhD positions in the area of structural integrity of additive manufactured (AM) materials/parts. These students will work under direction of Dr. Shamsaei from Mechanical Engineering Department. These opportunities include;
1- One PhD student is expected to work on experimental and analytical mechanics, additive manufacturing, fatigue testing and modeling, failure analysis, microstructural characterization, and fracture mechanics.
2- The second PhD student will implement computational mechanics to investigate structural integrity of AM parts. The candidate for this position should have background on crystal plasticity and finite element analysis. This candidate is also expected to be familiar with a finite element software including writing subroutines.
If interested, please send your resume and a cover letter, briefly explaining your relevant experience and publications to Dr Vaziri (mzv0045 [at] auburn.edu).
Two Fully-funded PhD Positions in Additive Manufacturing
The National Center for Additive Manufacturing Excellence (NCAME) at Auburn University is announcing for two fully-funded PhD positions in the area of structural integrity of additive manufactured (AM) materials/parts. These students will work under direction of Dr. Shamsaei from Mechanical Engineering Department. These opportunities include;
1- One PhD student is expected to work on experimental and analytical mechanics, additive manufacturing, fatigue testing and modeling, failure analysis, microstructural characterization, and fracture mechanics.
2- The second PhD student will implement computational mechanics to investigate structural integrity of AM parts. The candidate for this position should have background on crystal plasticity and finite element analysis. This candidate is also expected to be familiar with a finite element software including writing subroutines.
If interested, please send your resume and a cover letter, briefly explaining your relevant experience and publications to Dr Vaziri (mzv0045 [at] auburn.edu).
2018 Melosh Medal Winners and Finalists
The (tied) winners of the 2018 Robert J. Melosh Medal are A. Krischok (Stanford University) and A. Vidyasagar (Caltech).
A. Krischok presented the paper "The relevance of variational inequalities for the stability of mixed methods based on multi-field saddle point functionals" and A. Vidyasagar presented the paper "Predicting instability-induced pattern evolution through spectral quasiconvexification." Congratulations to both!
Postdoctoral/Research Associate on Computational Mechanics of Granular Solids
Seeking candidates for a postdoctoral position at Rutgers University in the area of granular materials including computational modeling and experimental testing, working under the supervision of Alberto Cuitino. Candidates with a strong background in computational mechanics of solids, interfacial mechanics, granular materials and computational methods are highly encouraged to apply. Please provide a resume including experience and qualifications and 3 names (with contact information) of potential references.
Two Fully-funded PhD Positions in Additive Manufacturing
The National Center for Additive Manufacturing Excellence (NCAME) at Auburn University is announcing for two fully-funded PhD positions in the area of structural integrity of additive manufactured (AM) materials/parts. These students will work under direction of Dr. Shamsaei from Mechanical Engineering Department. These opportunities include;
1- One PhD student is expected to work on experimental and analytical mechanics, additive manufacturing, fatigue testing and modeling, failure analysis, microstructural characterization, and fracture mechanics.
2- The second PhD student will implement computational mechanics to investigate structural integrity of AM parts. The candidate for this position should have background on crystal plasticity and finite element analysis. This candidate is also expected to be familiar with a finite element software including writing subroutines.
If interested, please send your resume and a cover letter, briefly explaining your relevant experience and publications to Dr Vaziri (mzv0045 [at] auburn.edu).
Two Fully-funded PhD Positions in Additive Manufacturing
The National Center for Additive Manufacturing Excellence (NCAME) at Auburn University is announcing for two fully-funded PhD positions in the area of structural integrity of additive manufactured (AM) materials/parts. These students will work under direction of Dr. Shamsaei from Mechanical Engineering Department. These opportunities include;
1- One PhD student is expected to work on experimental and analytical mechanics, additive manufacturing, fatigue testing and modeling, failure analysis, microstructural characterization, and fracture mechanics.
2- The second PhD student will implement computational mechanics to investigate structural integrity of AM parts. The candidate for this position should have background on crystal plasticity and finite element analysis. This candidate is also expected to be familiar with a finite element software including writing subroutines.
If interested, please send your resume and a cover letter, briefly explaining your relevant experience and publications to Dr Vaziri (mzv0045 [at] auburn.edu).
Two Fully-funded PhD Positions in Additive Manufacturing
The National Center for Additive Manufacturing Excellence (NCAME) at Auburn University is announcing for two fully-funded PhD positions in the area of structural integrity of additive manufactured (AM) materials/parts. These students will work under direction of Dr. Shamsaei from Mechanical Engineering Department. These opportunities include;
1- One PhD student is expected to work on experimental and analytical mechanics, additive manufacturing, fatigue testing and modeling, failure analysis, microstructural characterization, and fracture mechanics.
2- The second PhD student will implement computational mechanics to investigate structural integrity of AM parts. The candidate for this position should have background on crystal plasticity and finite element analysis. This candidate is also expected to be familiar with a finite element software including writing subroutines.
If interested, please send your resume and a cover letter, briefly explaining your relevant experience and publications to Dr Vaziri (mzv0045 [at] auburn.edu).