User login

Navigation

You are here

conference

Erik Bitzek's picture

ISAM4 2019 - 4th International Symposium on Atomistic and Multiscale Modeling of Mechanics and Multiphysics

Following the success of three former meetings (Tokyo 2011, Tokyo 2013, Brno 2016), the fourth ISAM4 meeting will be held at FAU Erlangen-Nürnberg, Germany from August 5th to 8th 2019. 

International Conference on Structural Integrity 2019 - Abstract submission deadline: April 15th, 2019

Dear Colleagues,

 

On behalf of the European Structural Integrity Society (ESIS) Portuguese National Committee we have the pleasure to extend a warm welcome to everyone planning to attend the

3rd International Conference on Structural Integrity (ICSI2019)

The third ICSI conference will take place on the beautiful Madeira Island, Portugal on 2 – 5 September 2019:

http://www.icsi.pt/

 

MMSLab-CNR's picture

Call for Abstract Submission to Civil-Comp 2019 Special Session CC16. Structural Health Monitoring and Model Updating for Heritage Structures

Dear Colleagues,

You are cordially invited to submit your abstract to our Special Session CC16. Structural Health Monitoring and Model Updating for Heritage Structures for The Sixteenth International Conference on Civil, Structural & Environmental Engineering Computing (Civil-Comp 2019).

Date & Location: 16-19 September 2019, Riva del Garda Italy.

Abstract submission deadline: 15 April 2019.

Asst. Prof. Dr. Emin Taner ELMAS's picture

10th International Conference on Mechanical and Aerospace Engineering (ICMAE-2019)

10th International Conference on Mechanical and Aerospace Engineering (ICMAE-2019)

Brussels, Belgium

 

Contact: 
For General Questions
Ms. Celine. Xi
E-mail: secretary@icmae.org

Zeliang Liu's picture

[July 28] USNCCM15 Short Course on Machine Learning Data-Driven Discretization Theories, Modeling and Applications

Dear Colleagues and Friends,

We cordially invite your participation in a short course “Machine Learning Data-Driven Discretization Theories, Modeling and Applications” as part of the pre-congress activities of 15th U.S. National Congress on Computational Mechanics Conference to be held on July 28, 2019 at Austin, Texas.

Ying Li's picture

Call for Abstract Submission to SES2019 Symposium 3.9 Multiscale modeling of molecular, cellular, tissue, and organ mechanics

Dear Colleagues,

You are cordially invited to submit your one-page abstract to our Symposium 3.9 Multiscale modeling of molecular, cellular, tissue, and organ mechanics for The 56th Annual Technical Meeting of the Society of Engineering Science (SES2019) 

Date & Location:

Kai Yu's picture

Call for abstracts: Symposium on 3D/4D printed functional materials and structures in 2019 SES Meeting

Dear colleagues:

     We would like to invite you to submit an abstract to the symposium on 3D/4D printed functional materials and structures at the 2019 Society of Engineering Science meeting to be held from October 13 to October 15 on the campus of Washington University in St. Louis, MO, USA.

Jingjie Hu's picture

2019 Science of Adhesion Gordon Research Seminar and Conference (GRS and GRC), Massachusetts, July 21-26

Dear Colleagues, 

The registration for 2019 Science of Adhesion Gordon Research Seminar (GRS) and Gordon Research Conference (GRC) is now open!  These are great events to consider if you are interested in adhesion-related problems. Please refer to the details below, and we look forward to seeing you this July in Massachusetts. 

Science of Adhesion Grodon Research Seminar (GRS) - Harnessing Adhesion Science: Translating Research Advances to Novel Applications

Stephan Rudykh's picture

Call for abstracts: IWCMM-29 Sept. 15-18, 2019 Dubrovnik, Croatia

Dear Colleagues, 29th International Workshop on Computational Mechanics of Materials (IWCMM-29) will be held in Dubrovnik, Croatia,  September 15-18, 2019. As part of this meeting, we are organizing a session on Functional and Architectured Materials  

Jie. Yin's picture

The 2019 Franklin Institute Laureate Symposium honoring Dr. John A. Rogers held by Temple University, 9-12PM, April 10, 2019

 

Soft, Body-Integrated Microsystems Technologies

 

Franklin Institute Symposium honoring Dr. John A. Rogers 

Recipient of the 2019 Benjamin Franklin Medal in Materials Engineering

 

Asst. Prof. Dr. Emin Taner ELMAS's picture

WBDC 2019- International Workshop on Big Data and Computing

WBDC 2019- International Workshop on Big Data and Computing

 

http://www.iwbdc.org/com.html

 

 

 

The conference flyer including the detail information  is attached.  

 

Synopsys at 2019 Frontiers in Medical Devices, Washington, March 2019

Date / Time: March 19-21, 2019

Location: College Park Marriott Hotel, University of Maryland, Washington, DC, USA

Synopsys will be the 2019 BMES/FDA Frontiers in Medical Devices event to talk about how Simpleware software is used for medical device design and biomedical engineering. We will also be providing a technology showcase seminar to demonstrate how to go from 3D image data to models for different applications.

Ashfaq Adnan's picture

1st International Symposium on Traumatic Brain Injury at the University of Texas Arlington (UTA) on April 11, 2019

The University of Texas at Arlington is pleased to host the 1st International Symposium on Traumatic Brain Injury – Mechanisms and Protections on April 11, 2019. The specific objectives of the symposium are to (i) share state-of-the-art research on TBI mechanism and protection, (ii) foster greater research collaboration across disciplines, sectors, initiatives and countries and promote interactions between the TBI research community with the veteran community, contact sports community and others for education and outreach, (iii) identify knowledge gap on TBI re

Asst. Prof. Dr. Emin Taner ELMAS's picture

ICMCE 2019, 2019 8th International Conference on Mechatronics and Control Engineering

2019 8th International Conference on Mechatronics and Control Engineering (ICMCE 2019)

will be held in Paris, France during July 23-25, 2019

 

Please kindly see the conference flyer as attached.

 

Contact information is as follows:

Ms. Caroline Miu

Email: icmpm@outlook.com

Tel: +00-852-30756684

 

Ms. Vivian Ni

L. Roy Xu's picture

2019 ASME Congress invitation-Dynamic failure of materials and structures

Thumbnail
interfacial crack initiated from a polymer notch (click here to view this YouTube video from our experiment),     read more below to submit your abstracts

Prof. Jun Xu, Dr. Scott Grutzik, and I organize one topic on “Dynamic failure of materials and structures” for 2019 ASME Congress. We invite you, your colleagues and group members to submit short abstracts before ASME’s deadline of Feb 25, 2019. More details below: 

OliverWeeger's picture

ECCOMAS YIC 2019 in Krakow - MS on “Novel theories, formulations, methods and applications in structural mechanics”

We would like to invite you and your students and colleagues to contribute your talks to a mini-symposium on the broad topic of “Novel theories, formulations, methods and applications in structural mechanics”, which we will be organizing at the 5th ECCOMAS Young Investigators Conference (YIC 2019, https://yic2019.agh.edu.pl/) in Krakow, Poland from September 1-6, 2019.

Tuncay Yalcinkaya's picture

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials

Dear Colleagues, 

We have the pleasure to invite you to 1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials in Ankara/Turkey on 22-23 August 2019 organized by METU and TOBB University of Economics and Technology with the support of European Structural Integrity Society.

Qiming Wang's picture

Abstract invitation for the 4th Mini-Symposium on 4M Engineering Materials and Structures of EMI conference 2019

Dear Colleagues, 

We cordially invite you to submit abstracts to the 4th Mini-Symposium on 4M (Modeling of Multiphysics-Multiscale-Multifunctional) Engineering Materials and Structures in the Engineering Mechanics Institute conference 2019 at Caltech during June 18-21, 2019. 

Submission link: http://emi2019.caltech.edu/home

Deadline: Jan 30, 2019

Modern Finite Element Technologies - ECCOMAS Thematic Conference

Dear colleagues,

We would like to draw your attention to the ECCOMAS Thematic Conference:

"Modern Finite Element Technologies - Mathematical and Mechancial Aspects"

which takes place in Bad Honnef, Germany from 1.-3. July 2019.
Deadline for presenting a one page abstract is on 1. March 2019

I would like to invite all you, members of the Scientific Committee to
make an effort in spreading the news, and increasing the participation.

-KEYNOTE LECTURES-

Synopsys at iCT 2019, Feb 13-15

Location: Centro Culturale Altinate San Gaetano, Padova, Italy

iCT is a key event for networking and knowledge exchange in the field of industrial Computed Tomography. 

Attend the Synopsys Industry Talk

Advanced CT Image Data Visualization, Analysis and Model Generation with Simpleware

Damage Mechanics Challenge Workshop

Damage Mechanic Challenge

The purpose of the conference is to gather computational scientist and experimentalist to define and launch a numerical challenge to predict damage evolution and signatures of failure in brittle material.  At the workshop, participants are invited to

(1) present their computational approach for numerical simulation of damage; 

Kai Yu's picture

Call for abstracts: Topic on 3D Printed Soft Materials in ASME IMECE 2019

Dear colleagues:

We would like to invite you to submit an abstract to the topic on 3D Printed Soft Materials at the ASME 2019 IMECE to be held from November 8 to November 14, 2019 at Salt Lake City, Utah.

Pages

Subscribe to RSS - conference

Recent comments

More comments

Syndicate

Subscribe to Syndicate