Skip to main content

research

Can a maruti 800 engine be used to construct a 10KVA petrol generator?

Submitted by specialist316 on
Forums
Ask iMechanica
Choose a channel featured in the header of iMechanica
research
Free Tags
GENERATOR
MARUTI

Dear All,

I am a mechanical engineer by education. This is just a research question. I was seeing a diesel generator employing an old mahindra tractor engine the other day and started wondering if a Maruti 800 engine would be able to work a 10 KVA generator, and wouldnt it be more fuel effecient (and cheaper to make) then one of the generators using an old diesel engine. Any thoughts would be highly appreciated.

Thanks,

Gagandeep Sethi

 

ABOUT Work done by a pressure applied to a system

Submitted by Lianhua Ma on
research
Work done by a pressure

I have one question  about work done by a pressure applied to a system.  The book of Thermodynamics often always present pdV (where dV is the change in the volume of the system. )but never Vdp, Why is that? Is it because we don't treat p as a variable? In a grand canonical ensemble is pressure constant for any system?

Acording to Thermodynamics first law,  du=dq-dw , where dw denotes work done by pressure and external force.  dw=pdv+dw' .   dq=Tds (Thermodynamics second law)

so, dU=TdS-Pdv-dw' 

2nd spatial derivatives from isoparameteric elements

Submitted by Wenbin Yu on
Forums
Computational Mechanics Forum
Choose a channel featured in the header of iMechanica
research
Free Tags
FEM

Based on my limited knowledge of FEM, I find it is difficult to use isoparametric elements for any problem whose governing
functional involve the second (or higher) partial derivatives of the unknown
functions. I hope some computational mechanicians can help me on this. Currently, I have a formulation derived from micropolar elasticity which has a functional involving second partial derivatives of the displacements. Thanks a lot for any of your suggestions.

Material model for high cycle fatigue

Submitted by Chali Alindunesiy on
research
finite element analysis
Fatigue
numerical simulation

In fatigue analysis, it is common to use S-N curve from database for spesific material, and some time for spesific way of loading. Is there any way to predict fatigue from direct simulation? For example, giving cyclic loading (10^5 times) and the material will suffer damage and eventually failed. In some FEM codes (MARC, LSDYNA, etc) there is Lemaitre-Chaboche model used to analyze material behavior under low cycle cyclic loading.

 Thanks in advance

Chali

ABAQUS unit conversion for nanometer length.

Submitted by wanbot on
research

Hi all,

I ran a pre-buckling analysis using ABAQUS.  I chose nanometer as my length unit. So for the Young's modulus, since my sample has 100 GPa for the Young's modulus, I put 0.0000001 as the value for the Young's modulus under the material property in the ABAQUS.

However, the resulted eigenvalue (~2 nN) was not as what I expected (~2uN). Based on the calculation based on the Euler buckling theory, the critical load should be around 2 uN. 

Subscribe to research