Blog posts
Lecturer - MIT School of Engineering
Lecturer
MIT - School of Engineering
The MIT Department of Civil and Environmental Engineering seeks to fill a Lecturer position in structural engineering with the opportunity to build strong ties with MIT Department of Architecture. Position is full-time for a three-year period starting September 1, 2012.
University Lectureship in Solid Mechanics/Materials Engineering, University of Oxford
The Department of Engineering and St Hugh's College at Oxford University
have a University Lectureship available in the area of Solid Mechanics
and Materials Engineering. The closing
date for applications is 31st May 2012. Further information can be
found in the attached files.
We look forward to receiving your application.
Alan Cocks
Building model for Sandwich panel in ansys
Hi all,
Can any one help in building a sandwich panel in Ansys and subject it to analysis like compression test , buckling test etc ...,
Face Sheet : Glass fibres
Core : EPS (foam).
Kindly help as soon as possible . its urgent. Atleast some insights would be helpful
I am kevin new here
Hi I am kevin new here, we have an invent on June, much free jewelry gifts for first 100 registers.
Gifts on http://www.favordeal.com
Fracture Resistance of Silicon With Nano Scratch Testing
Scratch testing, using nano loads, has become widely used for the study of adhesion strength and marring resistance of thin films and coatings. This same test can also be used to study fracture behavior on brittle substrates similar to a marring resistance test approach. This can provide an in-depth observation of failure on delicate substrate materials at precisely controlled and recorded loads.
Post Doc Position: Risk-based Selection of Constitutive Models for Geotechnical Analysis, EC Nantes (France)
Post Doc description:
Soil, as a typical natural material, has very complex behaviour which is very difficult to be accurately modelled. In geotechnical engineering, about half of the accidents are caused by insufficient designs. The soil’s constitutive model is the fundamental issue for modelling and analyzing soil-related engineering systems.
Performance of dissipative dielectric elastomer generators
Choon Chiang Foo, Soo Jin Adrian Koh, Christoph Keplinger, Rainer Kaltseis, Siegfried Bauer, Zhigang Suo.
Performance of dissipative dielectric elastomer generators.
Journal of Applied Physics 111, 094107 (2012)
2D modelling of laser welding
while carrying out a simple 2D analysis of welding of butt joint considering the source of constant heat flux and applying it at certain nodes as constant heat flux, i encountered a problem that it says that the temperature at particular node is exceeding the pre set limit and no solution is obtained. I am a freshman in Ansys so any help in this regard will be helpful
Energy Formulation of ELPD (Element Plastic Dissipation) ?
Hello Everybody
I can not find any theoric formula for ELPD in the ABAQUS theory manual and I need to know if we use eqivalent strees-equivalent strain and integrate to strain of fracture, does it give us plastic dissipation energy of an element?
Integrate[EQStress*d(EQStrain), {0,Fracture Strain}] ?
Thank you all