Blog posts
Opportunity for Researcher - Finite Element Modeling at the Novelis Global Research and Technology Center in Kennesaw, Georgia
Please apply online at http://www.novelis.com/en-us/Pages/Careers.aspx
Select USA in the "Country" field and click on "Submit". On the next page, select "Research and Development" in the "Job" field and click on "Search for Jobs". The position is listed as "Researcher-Finite Element Modeling"
Question about calling subroutine to get strain and stress
I am writing a subroutine DFLUX, the FLUX(1) is dependent on strain and stress. But I don't know how to get the strain and stress. I use SPRINC in the code but it seems to be wrong.
The equation for the problem is
q=(α^2XΩXε^2XE)/2
E=(σ/ε)*sin(d)
σ is stress and ε is strain
Postdoctoral position on: Identification of elastic microstructures from full-field measurements - CNRS & Aix-Marseille University France
A one-year postdoctoral position is available at the Laboratory of Mechanics & Acoustics, CNRS & Aix-Marseille University, France.
The project focuses on image-based identification problems for physical quantities of interest in solid mechanics within the framework of optical measurement methods for complex manufactured materials. The guideline objective is to develop an identification framework for multiscale, heterogeneous and anisotropic media.
More information can be found in the attachment.
Application deadline: February 28th, 2015.
PREDICTION FOR DEFORMED PART WITH TIME
Dear ALL,
Does anyone here has an experience carry out FE analysis for a part[bracket] which was deformed plastically during cyclic loading test.
I'm now working to resolve this issue when a bracket was fail to withstand the constant loading of 500N during cyclic test. It was reported fail at ~3800 cycles which was less than target.
Rgds.
Two PhD RA Positions: US Citizen or Permanent Residents Only
Graduate Research Assistant Positions
Graduate Research Assistant Positions are available for U.S. citizens or U.S. permanent residents who have completed a Master of Science (M.S.) degree in Civil Engineering or a related field and wish to pursue Ph.D. degree in Civil Engineering from Fall 2015. We will also consider outstanding students who have completed their B.S. degree and want to directly pursue their Ph.D. degree starting.
Micromechanics Simulation Challenge - Level 1
For the purpose of establishing the best practice for homogenization and dehomogenization needed in composites design and manufacturing, cdmHUB launches the Micromechanics Simulation Challenge. After incoporating comments from academia, industry and commercial software providers, we have finalized the final draft for Level 1 problems, which is attached here with more details can be at https://cdmhub.org/resources/665.
How to model random dispersion of MWCNTs in epoxy resin
Dear All,
I want to start some research on the Multi walled Carbon nano - tubes/ Epoxy resin.
In the begining I need to model a random dispersion of MWCNTs in epoxy resin in the ABAQUS.
Can any help me in this problem.
Thank you in advance.