I’m very happy to inform you, that among others, Markus Stricker and me are Symposium-Organizers of the Materials Science and Engineering Congress 2018 (MSE) and would like to invite you to submit your abstract to the symposiums:

 MD05: Plasticity Across the Scales - From Microstructure Changes to Bulk Mechanical Behavior

 Detailed information about the symposium is available at:

The catastrophic consequences observed after extreme events (flooding, earthquakes, vehicle impact, explosions, and fire) in transport and energy networks, as well as commercial and residential buildings, have significantly changed the public perception of risk regarding structures and infrastructure. Materials and structures are pushed to the limit in these conditions and given the fact that it is not always possible to provide an elastic response damage development must be considered and robustness becomes a precious characteristic.

Aging infrastructures represent a current engineering challenge. Huge budgets are necessary to keep their functionality and the lack of a proper and timely maintenance entails an increasing deterioration and therefore higher repair costs. Therefore, assessing the reliability of infrastructures becomes mandatory, with particular attention to the ones still in service even when their life limit has exceeded.

This paper aims to propose a new, fast and low cost method of condition rating for reinforced concrete bridges. This is based on visual inspection and non-destructive testing.

The aim of this tutorial is to develop a step-by-step instructions for simulation of a welding process with the FEA-program LS-PrePost. The tutorial contain a simulation of a single-pass gas metal arc welding, but we can use the same method to simulate multi-pass welding.

A funded PhD position is available immediately to work on mechanics modeling for 3D printed biomaterials. The PhD student is expected to conduct continuum modeling and finite element simulation (Abaqus) informed from meso-/micro-scale simulation results and experimental data.

PhD positions in the areas of soft robots, printed electronics, and bioinspired materials are available now in the Laboratory of Soft Machines & Electronics at the School of Packaging and the Department of Mechanical Engineering, Michigan State University.

The Michigan State University (MSU) School of Packaging invites applications for a full-time, tenure-track faculty position in the area of Packaging Innovation, Design and Additive Manufacturing. The appoint will be at the assistant professor level with a combined research/teaching/service responsibility. Review of applications will begin on February 1, 2018 and will continue until the position is filled.

Professor Charles Wojnar from Missouri University of Science and Technology has been selected to receive the 2018 Journal of Applied Mechanics Award for the paper "Linking Internal Dissipation Mechanisms to the Effective Complex Viscoelastic Moduli of Ferroelectrics", Journal of Applied Mechanics, v 84, #021006, 2017.

Join us at the University of Washington, Seattle, on Wednesday January 24th (1.30pm-4.30pm) for a free workshop on obtaining high-fidelity models from 3D image data.

Agenda

1:30 - 1:40 PM Registration & Refreshments

1:40 - 2:40 PM Introduction to Image-based Model Generation with Simpleware