Skip to main content

Blog posts

Rotating Cylinder by Abaqus

Submitted by Sutham_eng on
research

Dear everyone,

I try to run one case study that I got from Abaqus Verification Manual (4.1.37 Vumat : Rotating Cylinder).

But it doesn’t work, it always show an error ‘Node set assembly__m22 has not been defined’.  

Can anyone please tell me how to fix this error?

I have already attached the inp-file and subroutine-file with this post.

(The present Abaqus version that my university use are 6.10 and 6.11) 

Thank you very much indeed.

CONTINUITY AND CHANGE

Submitted by SHIH Choon Fong on
education
KAUST

I want to share with you my intention to step down as president of KAUST at the end of my term in November next year.  My President’s Circular announcing this to the KAUST community was sent this morning.  A global search for my successor will be initiated shortly, and until the next president comes on board, I shall continue to serve. 

czm modeling for metal

Submitted by hhabnn on
ductile tearing

hello

i am using ansys for simulate the crack propagation with czm modeling using interface element

and compare this result with result of beam theory but the result can't match togeather.

please send to me any opinion about the input factor in czm modeling for metal.

email: hhabnn [at] gmail.com

thanks

Abaqus Pile-Soil interaction

Submitted by peshawa12 on

Hello all,

I am really thankful for any help . I am in a very bad situation with my research project because of Abaqus, so please if you know what is wrong with my model please help me please.

I have a pile 200mm long..diameter = 50 mm.. the pile embedded in sand... the depth of sand layer =450mm.. other dimensions are L= 960mm,, W= 480mm.

the pile fully embedded in the soil.. on the top it is connected to a pulling arm , the length of the pulling arm =330 mm , the diameter = 25mm..

the pile is laterally loaded so it is a 3D problem

Subscribe to Drupal blog posts