Vacancies exist for high calibre one master and one PhD student to join the Innovative Design and Engineering Analysis Laboratory at York University, starting immediately.
The position’s primary area of research will focus on characterization and modelling of elastomers subject to high strain rates
Professor Ahmed Elbanna from University of Illinois at Urbana-Champaign has been selected to receive the 2019 Journal of Applied Mechanics Award for the paper "On the role of the plaque porous structure in mussel adhesion: implications for adhesion control using bulk patterning", Journal of Applied Mechanics, v 85, #121003, 2018. The paper is attached.
I would like to share our recent work published in Physical Review Letters.
https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.121.205502
Metal additive manufacturing enables production of complex metal parts that meet mechanical property specifications without the need for costly tooling. In addition, parts can be made in small batches or even manufactured on a “one-off” basis. Computed tomography (CT) scanning can be used to identify defects such as voids or inclusions that can occur in parts created through metal additive manufacturing, but in the past there was no way to determine how these manufacturing byproducts might affect performance.
From 3D Images to Models - Introduction to Simpleware Software Workshop
Date / Time: Wednesday, November 28, 2018 / 1:30 pm - 4:30 pm
Location: SNPS Phoenix/Chandler, AZ 85226, USA
Fee: Free-to-attend. Pre-registration is required as places are limited
Shuze Zhu and Harley T. Johnson
Nanoscale, in press, 2018, https://pubs.rsc.org/en/content/articlehtml/2018/nr/c8nr06269b
Shuze Zhu, Nikolaos Lempesis, Pieter J. in ‘t Veld, and Gregory C. Rutledge
Macromolecules, in press, 2018, https://pubs.acs.org/doi/10.1021/acs.macromol.8b01922
Materials Today, in press, 2018, https://doi.org/10.1016/j.mattod.2018.09.001
Yanan Chen, Yilin Wang, Shuze Zhu, Kun Fu, Xiaogang Han, Yanbin Wang, Bin Zhao, Tian Li , Boyang Liu , Yiju Li , Jiaqi Dai , Hua Xie , Teng Li , John W. Connell , Yi Lin, Liangbing Hu
3D Printed Anatomical Models: How Mediprint Leverage Synopsys and Stratasys Technology for Patient-specific Solutions
Wed, Nov 14, 2018 5:00 PM - 6:00 PM GMT
This customer webinar from Mediprint will show the benefits of medical 3D printing, with a particular focus on organs. Mediprint will discuss their use of Synopsys Simpleware™ software to generate robust models ready for 3D printing using Stratasys machines.
This vacancy is part of a new European project RELICARIO on recycling of end-of-life carbon fiber reinforced plastics (CFRP). The consortium consists of 4 industrial partners, one SME, one research institute and Ghent University (our group UGent-MMS).
