Blog posts
Lecturer in Mechanics of Materials - Loughborough University, UK
Loughborough University, UK - Wolfson School of Mechanical and Manufacturing Engineering Lecturer in Mechanics of Materials / Full Time Salary: £34,233 to £45,954 Closing date: 17 August 2014 The School is one of the largest and most successful engineering departments in the UK. Applicants should hold a Doctorate or equivalent experience in Engineering, Computational Mechanics or a related discipline.
Run Abaqus from a Java code
Is it possible to run Abaqus from a Java code? or is there any communication way between Abaqus and Java?
I want to simulate a simple problem and pass some info from Abaqus to Java code and vice versa.
Thanks,
XFEM for crack propagation
Hi
I am new in Abaqus XFEM and I am stuck at geting a crack propagation in XFEM ,working for my Master thesis, the crack doesnt propagate. In some examples its gets opened/widened, but its not propgating.
Can any one please advise me on this or help me with simple input file for checking.
I have attached a input file of mine , it owuld be of great help if someone could have alook and advise.
Thanking in advance
Thanks
Bijin
bijinvj [at] gmail.com
EST method with GNU Octave
The EST method -- http://www.e-uni.ee/e-kursused/estmethod/ -- http://digi.lib.ttu.ee/estmethod/ESTmethod.pdf -- is a general computational method, for solving boundary value problems for the structural analysis of frames, beams, and trusses. Differential equations are considered here together with a set of boundary conditions. Compatibility equations for joint displacements and equilibrium equations for member end forces at joints serve as boundary conditions.
Case Study Effect of Pore Size on Pellet-Based Catalyst Flow
We have a new case study on our website based on research at Imperial College into multiscale tomography and calculating permeability for catalysts. The project involved studying the influence of pore structure on fluid flow across large length scales in silica-alumina pellet-based catalysts.
3D data at different length scales was obtained from XMT, DBFIB-SEM and ET scanning and segmented into a binarised dataset.
elastic follow-up
This is the story of threefold failure, which doubtlessly is the subject of fracture mechanics, a story of failure in various regards, however. First, it comments on an article dealing with failure assessment, second it reports on the personal failure of the blogger to understand this article, and finally it bemoans the failure of a seminal idea.
Chasing for “prey”, I came upon a contribution on the assessment of “crack-like defects under combined primary and secondary loads”, namely
corotational concept
hello Dear friends
I have one question about corotational concept. is it possible to obtain tangent
stiffness matrix by TL approach and updating degrees of freedom(including displacement and
rotation by corotational. please aware me of related papers.
best regrads
Discussion of fracture paper #8 - Elastic follow-up
P.M. James: Re-derivation of plasticity interaction for combined loading under significant levels of elastic follow-up. Engineering Fracture Mechanics, Vol. 126, 2014, pp. 12–26.
Abaqus Fictitious Surfaces for Beams -- Help
All,
Hello. Looking to create a fictitious surface around an Abaqus model that uses beam elements for the purpose of transferring pressure loads from CFD to the beam. We are restricted to using beam elements; indeed, structure is a very long and thin beam.
What is the easiest way to do this?
Most grateful for your help.