User login

You are here


Postdoctoral vacancy (3 years) on automated software workflow for medical application of 3D printed technologies

3D printing or Additive Manufacturing (AM) technologies carry the promise of revolutionizing the quality and efficiency of healthcare. However, the required technologies, even when available, are currently too fragmented to be integrated into routine, affordable and streamlined solutions that can benefit a large number of patients. The challenge thereby is to deliver 3D printing technologies that enable:

Postdoctoral vacancy (2 years) on high-frequency vibration techniques for non-destructive inspection of 3D printed metal parts

The use of 3D printed metal structures is taking a very fast ramp-up in industry. General Electric has demonstrated the possibility of printing titanium fuel injectors for their LEAP engine, EADS has printed a nacelle hinge bracket for the Airbus A320, Boeing is printing plastic inlet ducts for high-altitude aircrafts, hip implants and other prosthetics are exploiting the design freedom of additive manufacturing (AM),..

Fully funded PhD Positions within new HetSys Centre for Doctoral Training at Warwick for October 2019 start

HetSys is an entirely new EPSRC-supported CDT which will train people to challenge current state-of-the-art in computational modelling of heterogeneous, real-world systems across a range of research themes such as nanoscale devices, new catalysts, superalloys, smart fluids, laser-plasma interactions etc.

austin_downey's picture

Multiple Ph.D. Positions focusing on real-time SHM, structural mechanics, and intelligent infrastructure at the University of South Carolina

Dr. Austin Downey in the Department of Mechanical Engineering at the University of South Carolina is looking for multiple Ph.D. students who wish to work in the fields of real-time structural health monitoring (SHM), structural mechanics, structural control, and intelligent infrastructure. Successful candidates must be excited to work in an interdisciplinary and international environment that will fuse concepts from solid mechanics, machine learning, real-time computing, prognostics, and multifunctional materials.

Funded Biomechanics PhDs via H2020 Project - UK & Luxembourg

Two available Early Stage Researcher/PhD positions for EU H2020 biomechanical simulation project at Synopsys Exeter, UK, with individual placements at Cardiff University and the University of Luxembourg.

Full-time, competitive salary, provides valuable industrial experience:

morteza.nejati's picture

PhD position at ETH Zurich: Fracture growth in anisotropic rocks

A PhD position in the area of computational fracture mechanics is available at ETH Zurich, Switzerland. The aim of the project is to numerically simulate fracture propagation in anisotropic rocks during coupled thermo-hydro-mechanical processes. See attached for more details. 

PhD and PostDoc Positions in Computational Biomechanics at NJIT

A PhD research assistant (RA) position and a Postdoc position in Biomedical Engineering (BME) are immediately available at the BioDynamics Laboratory directed by Dr. Xianlian Alex Zhou. The lab’s research is focused on computational biomechanics, biorobotics, digital human modeling, and personalized medicine. More details are available at Dr.

Ying Li's picture

Job Title: Postdoctoral Research Fellow – New Instrument Design

Job Title: Postdoctoral Research Fellow – New Instrument Design

Department of Chemical & Biomolecular Engineering/ Institute of Materials Science

University of Connecticut, Storrs, CT, United States


Application Deadline: Open until filled

Position Start Date: Available immediately


Igor Berinskii's picture

Postdoctoral position in metamaterials at Tel Aviv University (Israel)

Dr. Igor Berinskii proposes a postdoc fellowship in his group MultiScale Mechanics of Solids on a topic connected to computational simulations of shape morphing mechanical metamaterials and self-deployable structures. The candidate is expected to:

 - have a strong experience in the mechanics of solids

 - have excellent coding skills (C++/Python/Matlab)  

 - be proficient in FEA

PhD and MSc positions at the University of Western Ontario, Canada.


We are looking for talented, self-motivated, and enthusiastic students with a BSc or MSc degree in mechanical or materials engineering. Students with background in any of the following areas are recommended to apply:

byang's picture

FEA software engineer position at Altair engineering, Irvine, CA

Altair OptiStruct is a general finite element analysis code with comprehensive analysis solutions for linear and nonlinear static and transient analysis, buckling, eigenvalue analysis, NVH (noise and vibration), Component Modal Synthesis (CMS), thermal analysis and fatigue. It is the world leading structural optimization solution. OptiStruct serves over two thousand companies worldwide for analysis and simulation-driven design.


Ramin Aghababaei's picture

Postdoc position in cutting edge optimization for metal machining, Aarhus University, Denmark

Applications are invited for a 2.5-year postdoctoral position at Aarhus University, Denmark. The focus of the project will be on shape optimization of cutting edge for improving milling process of stainless steel. This research opportunity broadly involves the development of physics-based computational approaches and systematic simulations for understanding the micromechanics of material removal from metallic surfaces.  This project is part of a big Grand Solution industrial project, which is funded by the Innovation Fund Denmark.

Teng zhang's picture

Tenure-Track Faculty Position (Assistant Professor) in Design and Manufacturing at University of Mississippi

The Department of Mechanical Engineering at University of Mississippi ("Ole Miss"), Oxford, MS is seeking to fill a Tenure-Track Assistant Professor position in Design and Manufacturing to start Fall 2019. Successful candidate is expected to foster a balanced program of research and undergraduate/graduate instruction that integrates the perspectives of machine design, manufacturing, and robotics.

a12najafi's picture

Application Engineering Position at ANSYS, Ann Arbor, MI/Evasnton, IL/ Cannonsburg, PA

We are pre-screening candidates for an opening for an application engineer at ANSYS Inc. prefereably in Ann Arbor, MI.

The job entails providing advanced technical guidance on various aspects of computational Structural Mechanics with focus on Structural Dynamics to clients in industry and academia.

Postdoc position in crystal plasticity model of additive manufacturing at the National University of Singapore

Dr. Wentao Yan's group at the Department of Mechanical Engineering, National University of Singapore, focuses on metal additive manufacturing: computational modeling, experimental validation and data analytics.

jenda_z's picture

Ph.D. student position in mechanics of mechanical metamaterials

Professor Milan Jirásek at Faculty of Civil Engineering, Czech Technical University in Prague, is searching for a motivated Ph.D. student, who will work on our new ambitious project on non-periodic mechanical metamaterials. Candidates should be interested in and have some previous experience with mathematical modeling and numerical simulation of the mechanical response of materials and structures.

Teng zhang's picture

Two Ph.D. positions are available immediately at University of Mississippi (Ole Miss)

Two Ph.D. positions are available immediately in the Department of Mechanical Engineering at University of Mississippi (Ole Miss). The positions can be started as early as Jan 23, 2019 if possible.  Successful candidates will participate in a vibrant interdisciplinary and collaborative research group in our Blast and Impact Dynamics Lab and Additive Manufacturing for Research and Education Cluster (AMREC) at Ole Miss, and be involved in projects pursuing research in the field of shockwave/high-strain rate impact simulations, material and constitutive modeling, and failure analysis.

OliverWeeger's picture

Research Assistant in Computational Mechanics at TU Darmstadt

The newly established group for Cyber-physical Simulation at the Department of Mechanical Engineering at TU Darmstadt in Germany is offering a position for a
Research Assistant in Computational Mechanics.
Potential research areas include finite element methods, isogeometric analysis, design optimization, multi-scale & multi-physics, data-driven methods and additive manufacturing applications.

Yaning Li's picture

Ph.D and Post-doc Positions Open


Ph.D and Postdoc positions now open (for Fall 2019) in Mechanics, Biomimetics, and 3D Printing Lab at the University of New Hampshire/Mechanical Engineering Department.

More information about the lab can be found at

Please directly send CV to Prof. Yaning Li at:  

Postdoctoral Fellowship in Computational Mechanics At Duke University

Professors Wilkins Aquino and John Dolbow at Duke University are soliciting applications for candidates interested in a postdoctoral fellowship in computational mechanics at Duke University.  Applicants are expected to have experience in the development of numerical methods for problems in mechanics.  Experience with nonlinear systems of equations, high-performance computing, C++, and/or meshless methods will be viewed favorably.  


Gordan Jelenić's picture

Post-doc positions in Computational Mechanics at University of Rijeka

Two post-doc positions in Computational Mechanics are open at University of Rijeka, Faculty of Civil Engineering, for details see


Tianxiang's picture

Internship Positions in Schlumberger-Doll Research in Cambridge MA

Please note that a new version of the internship job description focusing on computation mechanics, with preferred skills defined, is now attached. The earlier job description (still attached as before), with focus on robotics, is still relavant. We have both positions available to fill for 2019.

We thank all students who have submitted their applications. They are currently under review. Both positions are still open as of now. - Tianxiang, Jan 14, 2019



Dear iMechanica readers,

cdeng's picture

One postdoc position in Dislocation Dynamics available immediately at the University of Manitoba

We currently have opening for one postdoc associate available immediately at the Univesrity of Manitoba ( He/she will be expected to model the dislocation networks and their influence on the mechanical properties of high entropy alloys. The ideal candidate would have a Ph.D. degree in Materials Science or Mechanical Engineering with experiences in Dislocation Dynamics.

oliver oreilly's picture

Tenure-Track Faculty Position in Energy Science and Micro/Nanoscale Sensors and Systems at U. C. Berkeley

Dear Colleague,

I am pleased to inform you that the Department of Mechanical Engineering at the University of California, Berkeley, seeks applications for one faculty position. The position is at the tenure-track, Assistant Professor level in the areas of Energy Science and Micro/Nanoscale Sensors and Systems.

Topics of specialization within these areas include but are not limited to:

Teng Li's picture

Multiple Postdoctoral Research Positions Available Immediately at University of Maryland, College Park


Applications are invited for multiple postdoctoral research positions in the Department of Mechanical Engineering at University of Maryland, College Park (UMD).  Successful candidates will participate in a vibrant interdisciplinary and collaborative research group and be involved in projects pursuing research in the field of novel sustainable materials with exceptional properties. Applicants in the following two areas are welcome:



Subscribe to RSS - job

More comments


Subscribe to Syndicate