User login

Navigation

You are here

job

PhD position, Composite Material Modelling

Brief. One full-time PhD positions on "Manufacturing and Computational Modeling of Natural Fiber-Reinforced Composites (Woven/Non-woven)" is available.

Minimum Requirements. High GPA and two first-author publications.

Location. Griffith University, Gold Coast Campus, Australia.

Funding. Full funding is available for eligible candidates.

Contact. Please send your CV to z.javanbakht at Griffith.edu.au. If eligible, candidates would be contacted by the end of March 2020.

Postdoctoral position in modeling and numerical simulation of shockwaves in porous materials

Modeling and numerical simulation of shockwaves in porous materials

 

A postdoctoral position is available immediately in the Laboratory of Microstructure Studies and Mechanics of Materials (LEM3) of the University of Lorraine (UL) in Metz, France.

PhD position in Materials Science and Engineering at University of Nevada, Reno

A PhD position in Materials Science and Engineering is available at the University of Nevada, Reno starting June 2020. The research focuses on grain boundary strengthening of nanocrystalline materials. The successfull applicant will focus on both experiments and CALPHAD modeling.

Interested applicants should send an email to lmushongera@unr.edu with the resume, cover letter, transcripts, GRE and TOEFL/IELTS scores in attachment. (All five documents should be included for full consideration).

 

yann.charles's picture

PhD position - Predictive analysis of the corrosion behaviour for aeronautical structural parts in 2024 T3 aluminium alloy

Dear all

A PhD position is open at Cirimat lab (Toulouse, France), in collaboration with AIRBUS Helicopters industry, entitled (see enclosed pdf):

 

Predictive analysis of the corrosion behaviour for aeronautical structural parts in 2024 T3 aluminium alloy

 

Application forms (CV + letter of motivation) must be sent before tuesday 24 march 2020 at 12:00 am to:

Christine Blanc – +33 5 34 32 34 07 – christine.blanc@ensiacet.fr

TUBS's picture

Junior Professorship (W1 Tenure Track W2) in „Data-driven Modelling and Simulation of Mechanical Systems“ (m/f/d)

The Faculty of Architecture, Civil Engineering and Environmental Sciences of the Technische Universität Braunschweig invites applications for a                                                                   

Junior Professorship (W1 Tenure Track W2) in

Associate in Mechanics of Multilattices (Experimental), Cambridge University

There is a research opening for a Research Assistant/Associate in the Department of Engineering, to work on lattice materials.

The post holder will be located in Central Cambridge Cambridgeshire, UK.

PhD position available: "Computational Design of Soft Robots"

I have a vacancy with my colleague Prof. Verstappen at the University of Groningen for a PhD student to work on the computational design of magnetically-driven soft robots (see details in the attached description). Candidates preferably have hands-on experience with finite element development and implementation. If you are interested, please send a CV before March 21 at p.r.onck@rug.nl.

 

yann.charles's picture

12 month PostDoc Position in France - Geosciences & Mechanics

A 12-month postdoctoral position is available in France on Structural characterisation of Granitic reservoir outcrop analogues using digital data capture and analysis (see attached pdf).

Application must be send before the 30th of march, 2020, to Dr. Ghislain Trullenque at UniLaSalle School (ghislain.trullenque(at)unilasalle.fr)

 

 

PhD Position --- 4D-printed deployable structures

Brief. A couple of full-time PhD positions on "Development of deployable structures using 4D-printing technology" is available.

Minimum Requirements. High GPA and relevant research background (two first-author publications).

Desirable Criteria. Highly qualified in computational mechanics and modelling 3D-printed structures.

Location. Griffith University, Gold Coast Campus, Australia.

Funding. Full funding is available for eligible candidates.

Postdoctoral position on high-entropy alloys in Nanyang Technological University

Research Fellow (Post-Doctoral) Position

Nanyang Technological University, Singapore

 

Area: Computational investigation of fracture mechanisms in high-entropy alloys

Justin Dirrenberger's picture

PhD position in computational mechanics in Paris, France

A PhD scholarship is available at PIMM laboratory to work on the computational design of architectured materials with tailored instabilities.

See the file attached for description.

The successful candidate should have obtained a Master's degree (or equivalent) with a strong background in computational mechanics, materials science, mechanical engineering or any related field; although prior knowledge of the French language is not mandatory, spoken and written English proficiency is needed.

PHD or POSTDOC in Computational High-Speed Impact Mechanics, Indusrtry-Funded

PLEASE NOTE: this position is only open to holders of Canadian, US or EU citizenship, or Canadian PR (permanent residence card) holders.

KEYWORDS: HIGH-SPEED IMPACT, COMPUTATIONAL MODELING, ADVANCED COMPOSITE MATERIALS, COMPUTATIONAL DAMAGE MECHANICS

Institution: University of Windsor, Canada ( https://youtu.be/RuAxubYgKcM )

Professor: http://www.uwindsor.ca/engineering/mame/cherniaev

Salary:

Cambridge University - Research Assistant/Associate in Mechanics of Multilattices (Theory)

A position exists, for a Research Assistant/Associate in the Department of Engineering, to conduct research into Mechanics of lattice materials. The post holder will be located in Central Cambridge Cambridgeshire, UK. There is an opportunity to invent interpenetrating lattice materials in order to design SOFT and HARD meta-materials of any given stiffness, strength and toughness. The actuation response due to seepage of a liquid through the lattice needs to be modelled by making use of experimental results from within the group.

lizheng619's picture

PhD Position in geotechnical earthquake engineering at the Université Gustave Eiffel, France (Extended to May 15 2020)

A new PhD position is open at the Université Gustave Eiffel, France. The project will focus on the investigate the influence of ground liquefaction on the behavior of homogeneous embankment under seismic loading. The technical strategy of this study will be a combined approach of 70% physical centrifuge modeling and 30% numerical modeling. The experimental study will provide important proof on the physical phenomena and essential data for numerical modeling; Being the complimentary of experimental work, the calibrated numerical model will be used to carry out parametric and case studies.

mattia.bacca's picture

1 PhD opening for Theoretical and Computational Micromechanics of Soft Biological Materials

We are looking for an energetic and highly motivated Ph.D. student to work on Theoretical and Computational Micromechanics of Soft Biological Materials. The project will be focused on studying biological gels and cytoskeletal mechanics.

miquel.aguirre's picture

1 PhD position in In-Vitro modeling and FSI of endovascular aortic repair - Marie Curie ITN project Meditate - ESR10

1 Early Stage Researcher (ESR) PhD position offered in biomechanics within the framework of the project MeDiTATe (The medical digital twin for aneurysm prevention and treatment) funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Actions (MSCA) Innovative Training Networks (ITN) with Grant Agreement No. 859836. MeDiTATe is a European Industrial Doctorate (EID).

miquel.aguirre's picture

1 PhD position in Real time Solid Mechanics & 3D Printing - Marie Curie ITN project Meditate - ESR03

1 Early Stage Researcher (ESR) PhD position in biomechanics offered within the framework of the project MeDiTATe (The medical digital twin for aneurysm prevention and treatment) funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Actions (MSCA) Innovative Training Networks (ITN) with Grant Agreement No. 859836. MeDiTATe is a European Industrial Doctorate (EID).

ql5jg@virginia.edu's picture

Two research associate positions to assist in experimental mechanics and advanced materials in Professor Xiaodong (Chris) Li's lab

The Department of Mechanical and Aerospace Engineering in the School of Engineering and Applied Science at the University of Virginia seeks candidates for two Research Associate positions to assist in experimental mechanics and advanced materials in Professor Xiaodong (Chris) Li's lab.

The research associates are expected to perform materials synthesis, coating and composite testing, microstructural and mechanical characterization, and finite element analysis, write reports and technical papers.

Jason Mayeur's picture

Research Assistantship Positions Available in Multiscale Materials Modeling at the University of Alabama in Huntsville

Positions are available in Dr. Jason Mayeur's research group in the Department of Mechanical and Aerospace Engineering at the University of Alabama in Huntsville. Preferred candidates will have earned an MSc degree in Mechanical Engineering or a closely related field, and have a solid background in theoretical and computational mechanics. Ideal candidates will also have prior experience in finite element modeling and computer programming.

Applicants should directly contact Dr. Mayeur:
jason.mayeur at uah.edu    

Erik Bitzek's picture

Three Ph.D. Positions in Computational Atomistic Modeling

The Department of Materials Science and Engineering of the Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg is inviting applications for three doctoral research positions to begin immediately. The successful applicants will work together with Prof.

TUBS's picture

W3 Professorship in Mechanics (m/f/d)

TU BRAUNSCHWEIG

 

The Department of Architecture, Civil Engineering and Environmental Sciences is seeking to appoint a

 

Pages

Subscribe to RSS - job

Recent comments

More comments

Syndicate

Subscribe to Syndicate