Skip to main content

ABAQUS Tutorial and Assignment #1

Submitted by Nanshu Lu on
ES 240
Fall 2006
solid mechanics
ABAQUS

1-1 ABAQUS Tutorial: Schedule & Proceedings

1-2 Learning ABAQUS: Begin with ABAQUS Command

1-3 Computer Assignment #1: Plate with circular hole

1-4 CAE Example: Having a sense of ABAQUS CAE

 

Attachment Size
1-1 ABAQUS tutorial.pdf 55.71 KB
1-2 Learning ABAQUS.pdf 622.74 KB
1-3 Computer Assignment 1.pdf 923.39 KB
1-4 CAE Example.pdf 290.25 KB
indeed28

Cool, this kind of study material if shared ii good, I want to learn and improve my basics in non linear analysis, have any suggestion for me.

I want to learn the approach strategy for a fea problem, specially how the load is applied and boundary conditions, under which category this problem comes ect... please advise

Sun, 03/04/2007 - 06:36 Permalink
infinity

 

Hello everyone,

 

When you create the model (for example a rectangle sample) in abaqus, I don't understand how you apply a crack and how you have a stress distribution in all the sample. Can somebody advise me ?

Thanks in advance.

 Infinity.

Tue, 11/06/2007 - 06:27 Permalink
ebarbero

Although emphasis is in orthotropic and laminated materials, you can use most of the book, including many examples, to learn Abaqus/CAE. Many users have said it helped learn Abaqus even though they were not that interested in Composites but somethig else. Model generation, elements to be use, an so on are common for all applications of Abaqus. Ch. 2 Intro to FEA. Ch. 3 Elasticity. Ch. 4 Buckling. Ch. 5 deals with 3D stress, Ch. 6. also 3D, Ch. 7. viscoelasticity, Chapters 8 and 9. damage, and Ch. 10. delaminations. There are many solved examples with pseudo-code that you can follow to do the examples in Abaqus/CAE.   

Wed, 11/06/2019 - 13:05 Permalink
gloriatrack

I doubt the kind of learning that you need can be provided via comments here, and that you will get anything complete to your specific needs. It is better to apply to some training, either online or offline. A simple search results for abaqus training point to Simulia Services website. Here is a list of all available courses from them:

http://www.simulia.com/services/course_descriptions.html

 Hope this helps a bit... :)

 

Tue, 12/13/2011 - 22:06 Permalink
vh

Noel,
Abaqus is a comercial package and its cost depends on where you intend to use e.g., Industry, University, Research centre etc. As far as I know, there is no way to legally get a trial version of this software for free. In any case you should consult Abaqus directly.

V. Hegadekatte, University of Karlsruhe, Germany

Mon, 08/13/2007 - 15:14 Permalink
nina333

dear all

I need help in my work i started to work with ABACUS and i suppose to work with shoulder data to review the reverse implant inside this shoulder.

 i can not explain this very well but i need some expert in ABACUS to ask them what to do exactly or at least get me started.

 Pleaseeeeeeeee i need an URGENT help......FROM ANY ONE.

please reply to me on: nl1422 [at] hotmail.com (nl1422[at]hotmail[dot]com)

Thank you

Nina

Fri, 05/23/2008 - 22:04 Permalink
J Mahmud

Hi Dear All,

I am Jamal, a PhD candidate from Cardiff University.

I try to model and validate an example of a hyperelastic plate with a circular hole problem.

The problem was demonstrated in a paper entitled 'FE formulation of the Ogden material model

with application to rubber like shells' by Y Basar and M. Itskov. Inter. Journal for Numerical

Methods in Engineering, 42, 1279-1305(1998).

 

I have modelled it in Abaqus 6.6.1 but the results seem not according to that journal paper.

Moreover, it's very difficult to get the results converged.

I have the journal paper and my abaqus results but I just don't know how to attach them here.

If anyone is interested to help me with this matter, I will e-mail the attachments.

Please write to: jmahmud2010 [at] gmail.com.

 

Wed, 01/21/2009 - 18:12 Permalink
taj

Hi mam. My nameof  is taj pursuing my masters in glasgow university. I am designing a product for a company which consist high density poly ehtylene and poly urithiene. I want to do load analysis on that product is it possible with abaqus. I dont know how to use abaqus can u plz guide me regarding this. Or any other software which you can recommend for this problem.

                                                                                                                                       Thank you

Sun, 07/19/2009 - 12:28 Permalink
Nanshu Lu

Sorry that I have no experience on simulation of self piercing rivets in ABAQUS. If you just search "rivet" in ABAQUS Documentation you can find out Tutorials-->Getting started with ABAQUS-->C6 has a related example. Good luck.

Fri, 03/16/2007 - 15:56 Permalink
vcvikas

Hi Sivakumar

I have found nodal displacement at loading points.

Can you tell me, how to select the cohesive element properties. The model which one prepared, I assume arbitary values of cohesive element properties. You can send me reply on my email as well. Its vcvikas [at] gmail.com

Vikas 

Tue, 09/01/2009 - 18:16 Permalink
rezkarim2003

Thanks a lot Nanshu for ABAQUS tutorial. I am now learning ABAQUS by myself. If you have this type of more tutorials can you upload it specially truss elements?

thank you once again.

 

Thu, 03/22/2007 - 12:22 Permalink
ksreddy

Dear madam, 

Iam a ressearch scholor from IITM,I would like to know procedure that,how one can model particulate metal matrix composites (wherein reinforces particles of different sizes,orients in different directions in the metal matrix) using either ABAQUS CAE or ANSYS.

I will be very greatful,if you provide this information. 


Wed, 04/18/2007 - 04:54 Permalink
RoozbehKia

Hi MS. Lu,

I found this link very helpfull. however I have hard time following the steps in this example.

The 7th step "Running ABAQUS/POST" it required to run a file named EXCEED. I am using ABAQUS version 6-7 and I can not find the file. Would you help me on that manner.

Yours

Roozbeh

 

Wed, 11/21/2007 - 18:53 Permalink
arunachetty

hello

i am arun and am doin my msc in astronautics at cranfield university,uk, and am using abaqus to simulate a single shear composite to metal bolted/bonded lap joint using solid elements for my thesis

could you please advise me on how to model composite laminates using solid elements?

 could you also please advise me how to model the adhesive that joins the composite and metal substrates and what type contact conditions should i specify?

i will be most grateful if you could respond to my query, Thank you very much 

Tue, 07/29/2008 - 21:45 Permalink
Chris_CCF

 I am a design engineer , I had many years with the modelling and I always want to learn ABAQUS ..thanks for the tutorial.  

Chris 

I am learning everyday

Tue, 04/17/2007 - 21:37 Permalink
gokhanaltintas

Thank you very much for abaqus tutorials. It is very usefull for learnin abaqus.

I need Abaqus CAE tutorials for experiencing with students. I will so happy if any body give me tutorial adresses, or turorials for usage of "Abaqus CAE".

Especially thaks for Ku this tutorial. But any orther tutorails have got please share us. It is not important levels.

Gokhan Altintas.

gokhanaltintas [at] mekanik.net (gokhanaltintas[at]mekanik[dot]net)

Sun, 05/06/2007 - 17:33 Permalink
Lucia Oso

Hi

I am a brazilian student and I am learning Abaqus by myself, but Iam with some problems. I need to model a composite material but I have not had success. If anybody now Abaqus tutorial for composite material I will be very greatful.

comments: I don't write in English very well... 

Thanks

Lucia

Tue, 05/22/2007 - 16:17 Permalink
qiuyifa

Fiber reinforced composites Textile reinforced composites

 

Thank you for the share. Thanks. I plan to simulate the performance of the fiber or textile reinforced composites. How about Abaqus? Could some one give me some advice?

 

Thank you in advance.

Tue, 05/29/2007 - 14:40 Permalink
Mahmood Ettehad

 Hello Dear all.

I am working on project , encountering with one problem about how i can use element spilliting methode in abaqus whether with abaqus toolbars or with introducing subroutine

is any one can help me?

thanck you in advance 

Tue, 05/29/2007 - 17:40 Permalink
SIVAKUMAR M V N

Hai All,

Iam  a research Scholar from IIT Madras,India  working with ABAQUS. I need some tutorial kind of thing for modeling crack.

Please kindly suggest me the ways to follow to model a Crack in a 3D specimen. and is it possible to model surface cracks in shells using ABAQUS?

Hope someone will help

 

Regards

Sivakumar 

Sat, 06/23/2007 - 06:21 Permalink
satish

satish

iam not getting *fil file after running analysis in abaqus cae ,due to this iam not able to do pre&post process in hypermesh,can u guide me on this regard

Thu, 06/28/2007 - 15:23 Permalink
Bhawesh Kumar

Satish,

When you create any model in CAE, it does not create *.fil by default. If you want *.fil file after analysis, you need to enter (*NODE FILE) or (*ELEMENT FILE) line manually in your input file. You need to enter the node set or element set(whatever u want) in that line and data line will include the variables, you want to write in the *.fil file.

You can look at *Node File section in ABAQUS keywords manual if you need more details.

Good luck!!!

Bhawesh 

Thu, 07/05/2007 - 01:22 Permalink
alinojumi

I want to define an special Behavior (Super-elastic ) for ABAQUS,and I tried to Link my UserMAterial routinr (UMAT) to the program but it doesn't identify my Fortran I don't know why? How can I do that

by the way is there anyone who had done kind of this job?

Tue, 07/03/2007 - 13:06 Permalink
yoursdhruly

This is in no means meant to replace any discusion here, but I thought these links might help. They are ABAQUS forums where you can get questions answered.

The official site (ABAQUS answers, requires registration)

http://abaqus.custhelp.com/cgi-bin/abaqus.cfg/php/enduser/std_alp.php?p…

The most popular (as far as I know) forum for Abaqus users (unofficial):

http://www.nabble.com/Abaqus-Users-f14343.html

Hope this helps, please share any other resources you may know of.



Thanks.

 

Mon, 07/16/2007 - 23:50 Permalink
infinity

 

Dear Madam,

Thank you for the documents you have linked. I have a student version of abaqus and i effectively needed this type of document to understand a certain number of things. There are still options that are not obvious for me, but i think i am in the good way.

I was wondering if you had a tutorial concerning crack introduction in a 3-D sample. I would like to have a force representation in function of the mesh size. I don't know how hard a such representation is.

Once again, thank you for your help.

Best regards. 

Mon, 07/30/2007 - 06:36 Permalink
Noel Dioyan

Hello ay body in this forum can send me the software about abaqus even the trial version or low version only . I want to study this software but I don't have  any copy of the softeware..Please  help..

Thu, 08/09/2007 - 14:07 Permalink
M. A. AL-Bukhaiti

Dear Sir, I would like appreciate to provide me by a various types of abaqus  tutorials that are related to dynamic simulation. My research field is in the erosive wear of matewrials. Thanks in davance .

Mon, 08/13/2007 - 11:06 Permalink
vh

Mr. Al-Bukhaiti,
Consult the abaqus documentation for a variety of tutorial problems. If you are working on a unix/linux system, then type "abaqus doc" on the command prompt to go to the documentation. Alternatively you can search on Google for "abaqus documentation" for a lot of links. I found the following link:
http://lcadm.rrzn.uni-hannover.de:2080/v6.6/

If you are interested in simulating wear using Abaqus, then you can refer to my papers/PhD thesis (http://vishwanath.hegadekatte.googlepages.com/curriculumvitae) which deals with wear of ceramic micro components. Also you will find there a review of the literature in this field. Most of my work is concerned with sliding wear, but may be useful for you.

V. Hegadekatte, University of Karlsruhe, Germany

Mon, 08/13/2007 - 15:26 Permalink
venkat_dsk84

i am a post graduate student. I am doing my project in FRICTION WELDING . I am in a situation to use ABAQUS in my project. So i need ur help me in create the finite element model

thank you

Thu, 08/23/2007 - 09:51 Permalink
arunsen

I am working on finite element formulation of thermopiezoelectric shell element. i want to incorporate the element in Abaqus software as a project work. i would like to know how to add the new element in abaqus.how can i add? Pls do help

 

Fri, 09/21/2007 - 13:17 Permalink
Paul Antezana

hi, my name is Paul I´m doing a masters degree in Civil engineering, it´s my first time to try finite element method in abaqus, use others softwares before, all the examples that i saw the help of the program are really complicated, could some send me a procedure o tutorial to do something like a a simple beam or a cantilever beam with four elements (1D, 2D Beams elements) whit one concentrated load and another distributed load, to really understand how the program works, I really y need your help, well, best regards for all of you and good bless you, take care.

 sorry if i misspell something I´m from Bolivia a speaking Spanish country

Pd. E-mail: paul.antezana [at] gmail.com (paul[dot]antezana[at]gmail[dot]com)

Wed, 10/31/2007 - 21:27 Permalink
gloriatrack

As Mr. Hegkadette mentioned earlier:

"Abaqus is a comercial package and its cost depends on where you intend
to use e.g., Industry, University, Research centre etc. As far as I
know, there is no way to legally get a trial version of this software
for free. In any case you should consult Abaqus directly."

________________________________________________

Gloria @ www.firsttime-homebuyer-loans.com

Tue, 12/13/2011 - 22:16 Permalink
hessamvalidi

Hi,

I want to model  Wear of rolls that occures in Roll-Forming process. I am doing this by Abaqus.

Who can give me some information about this matter?

 

Thanks

 Validi 

Sun, 11/11/2007 - 14:49 Permalink
Mickael Moscardo

Hello,

I'am a French student, and I have to work on a student project with Ansys of which the aim is to know the pressure (during time) in a compressible fluid layer impacted by a cylindric rigid body having a constant velocity.

Do you know if it is possible to solve this problem with CFX/CFD Flotran, or if I have to explore an other way to solve my problem? Has somebody experience in this domain (impact, fluid), and could help me?

Thank you for your help.

Bests,

 

Tue, 11/13/2007 - 21:33 Permalink
mambo

hi,

I am modelling composite structure consist of concrete slab on I-beam, I not sure how to define the 'contact' between surfaces of the sections. any good/simple example (*.inp or *.cae) that i could refer to? so that i will know how/when/where to apply the 'contact' function. please advice. thanks.

Thu, 01/10/2008 - 15:43 Permalink
otezer

Dear members of this community, as a very real newbie to ABAQUS, I would be glad to receive immediate response to this my very first post, if possible...

My subject is as follows:

A cantilever beam, left-end fixed, total length 3 meters.

Material: Steel, Elastic-perfectly plastic, Yield stress:240 MPa

Loading: Varying displacement at free end, node 167 (for example).

Displacement amplitudes:

Time---Magnitude as follows

0.0 ---  0

0.1 ---  1

0.2 ---  2

0.3 ---  -3

0.4 ---  -5

0.5 ---  2

can anybody provide help with

i)material modeling (cyclic plasticity)

ii)applying these displacements?

With all of my best regards,

Ovunc

otezer [at] hotmail.com

Tue, 01/22/2008 - 06:59 Permalink
chinmay.desai

chinmay

I am research scholar and recently working on machining of FRP composites. I am in need to study laser cutting process using ABAQUS simulation for one of the problem. Can any one give me idea about how should i approached it with ABAQUS? Beause that will help me to reduce my plenty of time instead of walking in the dark room.

 

Tue, 02/05/2008 - 15:48 Permalink
Ammar A. Yousifِ

i try to solve stick-slip problem by abaqus 6.5-1,  when i enter to interaction property manager and choose the penalty and toggole on slip rate, the table appear, but the my problem is that, abaqus didnt accept negative value under slip rate becuase just i press on ok that message apear for me (allowable slip rate must be greater than or equal to zero)

so the question is who can i enter negative value to slip rate (relativ velocity)table?

 

Wed, 02/06/2008 - 06:20 Permalink
ramesh.iitdelhi

R.Kadam Student IIT Delhi (INDIA)

can anybody tell me how to model piezoelectric composite beam in ABAQUS using plane stress element? which section should i creat? solid homogeneous or composite shell? if i creat composite shell section..problem is that it can be assigned to 2-d shell and if u creat solid homogeneous section i m not gettig correct results.

kindly plz help me out  id kadamrm [at] gmail.com (kadamrm[at]gmail[dot]com)

thanking you.

Fri, 02/08/2008 - 15:59 Permalink
Zoran Matev

 

Hi for everu one I am young in this area 

so I need to do my master work for fracture mechanics in welds

So please help me about what software to use

Abaqus

or

Ansys

Best regards 

Tue, 02/19/2008 - 20:56 Permalink
Zahid R. Khokhar

Hi!!

I have got a little experience of working with ABAQUS

I have to carry out analysis of a fibre reinforced composite under tensile fatigue loading in order to simulate damage..

I have embedded Cohesive zone elements in the model for simulating delamination

Can anyone suggest me any material/tutorial that can help me start and how to to go about fatigue analysis in ABAQUS

Regards

Zahid

Mon, 02/25/2008 - 10:20 Permalink
ellabou leila

 HI

I work about Modelling and digital simulation of the structures fissured under residual stresses, I have the problem to calculate the J-integral when I have  in initial condition residuel stress, because Abaqus (6.5) define that

Initial stresses are not considered in the definition of contour integrals. Therefore, contour integral calculations for analyses including initial stresses in the regions used for the contour integral calculations will not be correct

I have many others problems see: Modelling and digital simulation of the structures fissured under residual stresses

Can you help me

Tue, 02/26/2008 - 08:37 Permalink
sajadco

hi everybody.

i want to work in simulation in machining.is it possible to anyone to send file about learning that and help me. i really need to do it but i am confiused and i dont know what is the start point? . thank you.

sajadco

Wed, 03/12/2008 - 17:06 Permalink
sajadco

hi everybody.

i want to work in simulation of machining.is it possible to anyone to send  a file about learning that and help me? I really need to do it because it is about my msc project.but i am confiused and i dont know what is the start point? . thank you.

sajadco

Wed, 03/12/2008 - 17:38 Permalink
Hari Krishna

Hi every one, i am a beginner with Abaqus. can we model friction welding process using Abaqus? If yes, can you please tell some introdution where to start with.

Tue, 04/08/2008 - 07:17 Permalink
SibsonDalgo

Hi, can anybody tell me how to do modal analysis in Abaqus?it is used to determine the mode shapes and natural freuquency in vibration analysis

Tue, 05/06/2008 - 00:38 Permalink
VO Thi Gai

 Hi,

I wanna model a 3D composite cantilever beam. My model is 3D, but I use shell element for the section because composite is just defined by shell element. So I can't assignment this section to my model. I'm very glad if you could give me some advises. 

Tue, 05/13/2008 - 23:30 Permalink
nina333

hello Lu,

I do thank you for your tutorials. But as i have tried the CAE example and i just manged to let work i tried to do my own model by creating part and i wanted to divide it but i did not find any help neither in simuli or tutorial or any other source to guide me on what i want to do basically. I hope if you can help me by emailing me so i can ask you directly please.

nl1422 [at] hotmail.com (nl1422[at]hotmail[dot]com)

thank you

Nina

Wed, 07/09/2008 - 17:24 Permalink
Langhorst

Hello to everyone

I am doing my PhD at the Technical University of Munich (Germany)
and I want to simulate the structural effects of work pieces due to the thermal influence
of manufacturing processes like laser-beam-welding, laser-beam-cutting or
friction-stir-welding. Unfortunately I am more or less a beginner in ABAQUS,
but perhaps you can give me an advice how to start (a special tutorial for
thermal problems) or if it’s possible to simulate these kind of problems at all.

I would be deeply grateful for any help and 

thanks a lot in advance

Mirko

Sun, 10/05/2008 - 11:52 Permalink
Xiaoteng Wang

Hi Mirko,



I think FSW is quite different from laser beam welding. Although both of them are joining process, the mechanism of FSW is far away from the traditional arc welding. So before your start, please decide which branch you should choose because both are not so easy to study. For FE simulation, I only carried out FEM calculation of arc welding, such as TIG, MIG and Laser. I highly recommend you to read Goldak's first paper of double eclipsoid welding pool model:COMPUTER MODELING OF HEAT-FLOW IN WELDS, METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY 17 : 587 1986. That paper is a classical work.Another review is also good: Modeling of fundamental phenomena in welds,T Zacharia / J M Vitek / J A Goldak / T A DebRoy / M Rappaz / H K D H Bhadeshia,Modelling and Simulation in Materials Science and Engineering,3 (2), p.265-288, Mar 1995.



I dont know if the newest version of ABAQUS  provides the Goldak model or not. But another FE software MSC.MARC has already succeeded in implementation of Goldak model as GUI module. Anyway you can implement the model easily using subroutines.



FSW is still very difficult to model, because the FSW is not simply melt and solidification process. Dynamic recrystallization taks place dramatically in FSW. I think the FE simulation of FSW is much more difficult than arc welding.



I'm not sure what kind of problem you are interested in, but from what you described, I think your work may be related to residual stress/strain after welding or joining process. I think it is very challenging problem because of the highly nonlinear material properties and coupled phenomena. Good luck.



 



Best regards.



 



Wang



 

Mon, 10/06/2008 - 10:20 Permalink
proksi83

Dear  Hi Mirko,

 

I`m alireza, iread your post, I am working on simulation of arc welding process and I use ABAQUS software. if it is possible for you, please send me two following paper that you mentioned to those in your post: 

COMPUTER MODELING OF HEAT-FLOW IN WELDS, METALLURGICAL TRANSACTIONS
B-PROCESS METALLURGY 17 : 587 1986.

 

Modeling of fundamental phenomena in
welds,T Zacharia / J M Vitek / J A Goldak / T A DebRoy / M Rappaz / H K
D H Bhadeshia,Modelling and Simulation in Materials Science and
Engineering,3 (2), p.265-288, Mar 1995.

 my mail: akohandehghan [at] aol.com

proksi83 [at] gmail.com

Thanks and Best Regards.

Wed, 04/29/2009 - 12:39 Permalink
ChangyongCao

 Hi, everyone! tanks for your attention! I am using ABAQUS for module FSI, during analysis, I get the error information:

 

The ratio of deformation speed to wave speed exceeds 1.0000 in at least one element. This usually indicates an error with the

 model definition. Additional diagnostic information may be found in

the message file.

 

Who knows the reason for that? and can be remedy? Thanks.

Sat, 01/17/2009 - 05:06 Permalink
ftr_romeo

 Please am a complete novice with abaqus.i've read a couple oftutorial about it and it's not really going through.i need the room to supply me with free version of the software and some biginners tutorial. Ineed abqus for my future research work on friction composites.

Thanks

Fono Tamo Romeo,
Tel:+2348067367790
E-Mail:fonotamoromeo [at] hotmail.com,Dept of Mechanical Engineering,
Obafemi Awolowo University,
Ile-Ife, Nigeria.

Fri, 03/06/2009 - 03:57 Permalink
SAJIB

hi,

I am sajib.donig my unedrgrad thesis "strenghtening beam in flexure in two point load" using ABAQUS 6.4.

I got results but the beam analysis shows more stiff behaviour...a lot more than exp results.

i used correct E value. for beam 200X300X3000mm i used mesh size 25X25X25 mm,used t3d2 as steel and shell elements as FRP layer.i modelled 1/4 th of the beam and took advantage of symmetry.i also used rigid element to to apply load in two rows.and supported the beam by restraing 3 line of nodes along width in DOF 2.

can any one suggest me where may be the problem? 

 

thanking every one

SAJIB

sajib.civil [at] gmail.com 

BUET 

Tue, 03/10/2009 - 17:20 Permalink
aa2105

Hi

I am trying to make a shell model of a rectangular plate and need the part in the yz plane (I will eventually use the mesh coordinates, which need to be in the yz plane for another program). However I can't seem to draw in this plane, i can only do it in the xy plane which is the default? (The part has to be a 3D shell). Can anyone help? Thank you.

Please reply to: aa2105 [at] imperial.ac.uk

Mon, 03/16/2009 - 12:15 Permalink
Gopi Lingam

Hi All -

I am new to Abaqus. Can anybody help me how to run a model in Abaqus to find out how the thermal strains/stresses are developed in metals during heat transfer.

Thanks,

- Gopi

Thu, 04/09/2009 - 19:54 Permalink
sakhaaei

dear nanshu

i am a mechanical enginner and looking for someone who can teach me how i can model an explosive forming in abaqus.

it is very important for me.

so if u help me in this regard,i will help u in any regard that i could.

thanx.

Sat, 04/11/2009 - 12:23 Permalink
jing.lee

excuse，can you tell me how to handle the promble when i create an iteraction between two solid parts, and it cause the problem of hard to convergence.

the warning is:

***WARNING: A SLAVE SURFACE DEFINITION HAS BEEN DEFINED ON A FACE OF ELEMENT 1  THAT CONTAINS NO MIDFACE NODE.  THIS MAY LEAD TO CONVERGENCE DIFFICULTIES.   THE ELEMENT TYPE WILL BE CONVERTED AND A MIDFACE NODE GENERATED ATICALLY.  THE ELEMENT NUMBER WILL BE UNCHANGED.  SEE THE OUTPUT FROM THE PREPROCESSOR TO CONFIRM THE NEW ELEMENT AND NODE DEFINITIONS.  THIS MESSAGE WILL NOT BE REPEATED IF SUBSEQUENT ELEMENTS OF THIS SURFACE ARE CONVERTED

Thu, 04/23/2009 - 07:25 Permalink
vcvikas

I have prepared FE model for crack growth analysis in ABAQUS. I want to know that how can we get out put results? e.g. CTOD or J- intergral values. I am getting LLD. Plz help me

Mon, 08/03/2009 - 07:01 Permalink
tahsinopoz

 

 Hi everyone

I need your help to make simulation fo cutting process using Abaqus. can anyone send me a inp or py file of any type of cutting operation including remeshing technique.

 

thanks in advance

Tahsin T. Opoz University of Huddersfield UK

Thu, 08/20/2009 - 16:02 Permalink
mansoor

Hello to everyoneI want to model a reinforced concrete cylindrical shell with abaqus using concrete damaged plasticity model. I want to model meridional and circumferential rebars in cylindrical shell in abaqus cae. I want to know which rebar geometry (angular or constant) I should use for modeling of both meridional and cirunferential rebars.Can I plot crack pattern for reinforced concrete shell in abaqus?please guide me

 

Wed, 09/02/2009 - 10:22 Permalink
vikas sharma

hii mam

            i m vikas ....i m doing M. TECH at IIT in  INDIA .  i m beginer with abaqus & recently working on drilling of polymer matrix composite..... i have problem in simulation & modelling of dill n composite plate . so plz solve my problem ...... ? . how to make better result with help of any language like C n FORTRAN..... how to solved this kind of problem? ..... plz send me any model or tutorial then  i started work....

 

 THANKS

rply.........

Wed, 09/02/2009 - 12:13 Permalink
mrrahimi

hi every body

I am reza, student of civil engineering, marin structure in master's degree. nowdays I am invole in a simulation of  piles and soil surrounded.I work with abaqus 6.7, and I've use3D elements for piles. I want to obtain the bending moments of the piles, but I don't know how I can get it.It's my pleasure if anybody help me.

best regard

Sun, 10/25/2009 - 18:20 Permalink
mrrahimi

hi again

I'm so sorry but I'm really envolved in that problem, it's my thesis and there is not enough time 4 me.

anyone can help me in computation of bending moment in 3D solid elements.

tanx in advance

Mon, 10/26/2009 - 20:50 Permalink
iyousuf

Dear  Nanshu Lu and All

I hope you are fine and am really impressed by the work you have done and are continue to do.  I am currently working on Abaqus 6.9 and trying to solve a contact problem. I have completed few applications in Abaqus very simple ones that include stress analysis of beams and relative simple structures. But now that i have move to contact analysis, I am struggling to make contact between two simple bodies like a 2D model. I use a plate and place a block on top of it and try to make ineteration between the two but no luck

I was hoping if you or any one can help me in this regard with a simple contact analysis tutorial or guide me where i am worng i will really be grateful.

Also my email is

imranyousuf78 [at] gmail.com (imranyousuf78[at]gmail[dot]com)

Many thanks

 

Wed, 11/18/2009 - 09:53 Permalink
Youssefans

Dear all,

Do you have any experience of using ALE mesh adaptivity in ABAQUS/Standard to prevent mesh distortion? Frankly, I doubt whether ALE mesh adaptivity is available in ABAQUS/Standard or not.

 Any help would be appreciated.

 

Regards

Yousef A

Thu, 11/26/2009 - 23:39 Permalink
elmi

Dear all....

Iam modelling and analysing a simply supported RC slab with ABAQUS CAE through Concrete Damaged Plasticity. The results show poor curve beyond the elastic region. The load vs central deflection graph shows very low curve at plastic region, which is far away when compared to experimental test result. I have tried many options for tensile behavior but still give poor results. I have modeled concrete material using C3D8R elements and T3D2 Truss elements for steel reinforcement which are embedded into concrete.

Please let me know what is the ideal data or equations or expression to relate the tensile behavior of RC Slab.

Please email me at kingstreet101 [at] hotmail.com (kingstreet101[at]hotmail[dot]com).

Many thanks for your help.

 

HELMI

Mon, 01/18/2010 - 05:57 Permalink
Abraham (not verified)

Dear all

I am a masters student, doing my thesis work in Buckling of thin films bonded to compliant substrates. I want to model and simulate the buckling pattern of thin films on substrate structure using abaqus.I will appreciate if any one can help me in this regard.

Best regards

Wed, 02/17/2010 - 10:06 Permalink
Abraham (not verified)

 

Dear all, 

I am a masters student, doing my thesis work in Mechanics of thin films on compliant substrates.I want to model and simulate the buckling pattern of this bi layer structure using Abaqus. I will appreciate if any one help me in this regard.

Best regards

Abraham 

 

Wed, 02/17/2010 - 10:18 Permalink
tirthankar

Hi all,

 I am looking forward for some help from your side.

I am currently working on Tissue Cutting using Cohesive Zone Modelling. I want to run that simulation in Abaqus. So I need some material to start with.

Can you help me?

Fri, 02/26/2010 - 19:05 Permalink
saba_sarami

Hi All

I am a beginner in using abaqus, I am trying to model buckling of a plate but I recieve an error "TOO MANY ITERATIONS NEEDED TO SOLVE THE EIGENVALUE PROBLEM" , does any one has any comments? I really need help?

Saba

Sun, 05/30/2010 - 11:50 Permalink
hamid.farivar

Dear all,

i hope you are well,

I want to know that how i can analyze acoustic and noise problems with abaqus? can someone recommend me a tutorial or document to start? or do you have any suggestion to work on other softwares?

Regards

Tue, 08/03/2010 - 20:11 Permalink
hamid.farivar

Dear all.

I hope you are well,

I want to know how i can analyze the acoustic and noise problems with
Abaqus? can anyone recommend me some valuable tutorials or documents to
start? or is there any superior software in order to work on these
subjects?

Regards

Tue, 08/10/2010 - 07:34 Permalink
hamid.farivar

Dear all.

I hope you are well,

I want to know how i can analyze the acoustic and noise problems with
Abaqus? can anyone recommend me some valuable tutorials or documents to
start? or is there any superior software in order to work on these
subjects?

Regards

Tue, 08/10/2010 - 07:35 Permalink
hygreevakir.namburi

 Hallo everyone,

 

I am Hygreeva doing my PhD first year on the hydride carcking in Zirconium alloys. I have to work on modeling and analysis of crack propagation in Zirconium alloys using X-FEM in abaqu. I am very very new in using analysis software. In this regard, I would like I would like to learn the software and model crack propagation problem. 

 

Can some one please provide me the information on Tutorials,  or websites.

 

I wish you a nice day.

 

Regards,

Hygreeva

hygreevakiran [at] yahoo.com

 

 

 

Hygreeva K Namburi

Wed, 08/11/2010 - 14:18 Permalink
14811481

Hi dear prof.

i am postgraduate student in mechanic course. i
want research about interaction between tire and soil for my thesis. now
i need toturial of this part in abaqus software. kindy send me this
file if you could aim me.

best regards

hojjat

Mon, 10/04/2010 - 13:39 Permalink
14811481

Hi dear Prof. Teng Li.

I'm postgraduate student in mechanic corse. I am working on my thesis about interaction between soil and tire simulation with Abaqus. kindly give me ABAQUS Tutorial about this part if Could you.

best Regards

hojjat

Tue, 10/05/2010 - 14:51 Permalink
indiarahuliit

Hi

I want to model and stimulte a borehole heat exchanger using ABAQUS.

But I am more or less a beginner in ABAQUS,

It will be really helpful if someone could give me a tutorial regarding a similar topic (heat transfer analysis) or give an advice on how to start with it.

I would be deeply grateful for any help.

thanks a lot in advance

Rahul

Thu, 10/21/2010 - 09:21 Permalink
txl

I want to model a 3D composite layer under coupled tem-displace step analysis. My model is 3D, and I use solid element for the section but I can't assignment material properity to my model. I'm very glad if you could give me some advises.

 And does anybody have the document <<Analysis of composite materials with abaqus>>

best regards

Sun, 11/07/2010 - 15:14 Permalink
parghazeh

Hello.I want to put a cylinderical shell into another,but first cylinder's diameter is bigger.I dont know what type of contact must be selected,can you help me?

Thu, 12/30/2010 - 11:41 Permalink
mister no (not verified)

ABAQUS defines the viscoelastic properties also using a Prony series for
the shear and the volumetric response. It should therefore be possible
to convert the ABAQUS parameters to ANSYS format.

Wed, 02/16/2011 - 18:33 Permalink
a.hasani

I have confronted to errors that I dont know how can I resolve theme, as follows:

The rigid bodies with the reference nodes contained in node set ErrNodeRefNodeNoRotInert have no rotary inertia associated with them and the rotational degree of freedom of the reference nodes is not restrained. Either rotary inertia must be defined at the reference node or the rotational degree of freedom of the reference nodes must be constrained. See the status file for further details.

and

The rigid bodies with the reference nodes contained in node set ErrNodeRefNodeNoMass have no mass associated with them and some degrees of freedom of the reference node are not restrained. Either mass must be defined or all of the translational degrees of freedom must be constrained. See the status file for further details.

 

could you please help me?

Thank you,

Arman. 

Thu, 04/14/2011 - 20:12 Permalink
onur.akovali

my first contribution

 http://cobweb.ecn.purdue.edu/~ahvarma/

 

2} Class Lecture Movies



    1] CST - Model Development

    2] CST - Results Analysis

    3] LST- Model Development and Analysis

    4] Beam bending analysis using different elements including Q4, Q6, and Q8

         Post-processing ideas for stress, displacement, XY-plots, etc.



    5] Plates - Model development using different elements (STRI3, S4R5, S8R, S4)

    6] Plates - Post-processing and analysis of results from models using different elements.

MOVIE 1 - BRACE EIGENVALUE ANALYSIS

                      MOVIE 2 - CYCLIC ANALYSIS OF BRACES WITH PIN ENDS

                      MOVIE 3 - CYCLIC ANALYSIS OF BRACES WITH FIX ENDS AND COMPARISON

 

 

 

Tue, 06/21/2011 - 18:26 Permalink
khlabla

Normal
0

false
false
false

EN-GB
X-NONE
X-NONE

MicrosoftInternetExplorer4

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

I’m trying to model a reinforced concrete beam using concrete
damage plasticity. I have conducted an experiment for both uniaxial tensile and
uniaixle compressive test.  I have used
ABAQUS concrete damage plasticity. I have derived both Tension stiffening and Compression
hardening parameter but I have a problem with concrete compression damage and
concrete tension damage. I don’t know how and what equations I should use and
how to derive the data.

I would really appreciate if anyone could help me.

 Regards

G

Mon, 07/11/2011 - 12:25 Permalink
hasnain

Hi everyone,

i m working on 2D and 3D metal cutting simulations, i have run those simulations on LS-DYNA and AUTODYN ,can anydody please guide me to run these simulations in abaqus. i have been using abaqus for analysis. if anyone having tutorials or input file regarding simulations can send me at hasnain_09 [at] yahoo.com

i shall be very thankfull.  

Sat, 07/16/2011 - 06:56 Permalink
RamgopalB

Dear all,

Simulia is offering the Abaqus student version for free. All you need to do is to open this Simulia website

http://www.simulia.com/academics/learning-community.html

 and click  Sign up for your DS Passport and log in now! 

and provide the valid student id or proof and the software and complete the order. The succesful order will be available for download in 4 or 5 days. 

 

Best Regards,

Ramgopal Balijepalli

 

Wed, 07/27/2011 - 15:34 Permalink
danielteruna

Dear Lu

I am trying to conduct cyclic simulation of steel material. When I chose combined hardening model 

with use parameter, I must input kinematic hardening parameter C1 and gamma1.

Could you explain how to get this parameter from uniaxial tensile test? Besise that at the subroutine cyclic loading

we must input the eqivalent stress and equivalent plastic strain.   What are these parameter? If I am not wrong thsese parameters identic with 

stress and stress from uniaxial test.?

thank you for your help

daniel

Mon, 08/08/2011 - 04:39 Permalink
Nzaoui

Hi every body;

I look forword help, how about e_learning for Abaqus ?

is there anywhere webinars and online interactive course of Abaqus

and thx for all

 

 

 

 

ZAOUI Noureddine
Electromechnical Engineer

Sun, 08/28/2011 - 19:43 Permalink
luisavilesm

Hi, I am a studen in civil engineering. I am trying to modelling some earth dams with abaqus, but I have a problem..I need to use subroutines for both materials clay and sand at the same time..How can I do this?..when I work only with one Umat, i don't have problem but when I use two umats the problems appears..anybody can help me?..

 

I check the manual, tutorials..etc but i can find anything of this..I hope your help

My mail is lanavi017 [at] hotmail.com, if someone want sent me information directly.. 

Thanks!

 

 

Thu, 10/13/2011 - 15:44 Permalink
apin87@hotmail.com

Dear Nanshu Lu and all of abaqus user here,

 hi everyone, Im new user here, after review the notes of nanshu Lu, i try assginment of stressing a plate with a circular or ellliptical hole and i had success to run the input file. but for question 2, the question is about modifying of the input file with using the *DLOAD comand, IST THE THE *DLOAD IS WRITE IN THE FORTRAN FILE AND RUN IN THE ABAQUS ANALYSIS? CAN I GET THE RESULT OF THIS QUESTION OR THE EXAMPLE OF INPUT FILE AND FILE SUBROUTINE THAT I REFER FOR BEGINNER.

Besides, my research is on the bone remodeling and i need to put the complex equation to analysis using the abaqus. so may i have the example such assignment of that with analysis one of the model with modfying the input with the some equation file subroutine..

 Thank you very much...   

Tue, 03/06/2012 - 01:55 Permalink
billymattson25 (not verified)

I'm a student in the States and I am needing an update tutorial site for abaqus.  I've read throught this site, but a few of the sites I've looked at are 3 and 4 year old tutorials.  I'm looking for help with engineering solids, for car and motorcycle parts .  Any suggestions for a good tutorial would be helpful. colon cleanse Thanks

Tue, 03/06/2012 - 02:10 Permalink
elouis

hello
I want to know:
the problems of cracks, and their choice of propagation direction!
1) is there a method by XFM can calculate the integral J (KI and FIC ...)?
2) what are the procedure?
and thank you, my dear scholars?

Tue, 03/27/2012 - 09:28 Permalink
sriramk

i am running a dynamic/explicit anlaysis with an

allocated memory of 8GB in 20 GB ram. after some time the

analysis got an error saying that

 "Abaqus/Explicit was unable to allocate sufficient memory during the analysis. Please check the memory setting in the .env file or the memory usage in the .use file if files were available.You can use command "limit" or contact your system manager to increase the datasize for the analysis. If the problem could not be resolved, please report the issue to local office."



i am using 64 bit windows xp system. how can i get rid of this problem. which .env file has to find to make over this problem?

Sun, 05/13/2012 - 10:01 Permalink
mustafa123

Dear all

I am interested in using beam element in abaqus and define the stress
resultant- displacement nonlinear curve ( Axial-displacement,
Moment-curvature, torque-twist angle), could you please guid me , how i
can define these curves for beam behaviour?

It's my e-mail adress:

Mostafa_borgheie [at] yahoo.com (Mostafa_borgheie[at]yahoo[dot]com)

Your reply would appreciated in advance.

Mustafa

Fri, 06/29/2012 - 16:04 Permalink
srt611

Hello ma'am, 



I am Swapnil student of VJTI India, doing project in "Measuring stress relief in concrete due to Incremental core drilling". For this I have too model a column in which a core will be drilled in a structural element. I wanted to know how I can analyse a model which is continuously remain loaded during the coring process and will give results in terms of stress/strain at specific increment of coring procedure. 



For. e.g column is loaded for a certain load and is having certain stress level, i'll remove a increment of 75 mm diameter of 5 mm thickness and see the effect on stress in column, i'll repeat this procedure for more number of increments successively in co relation with previously obtained results.


What type of procedure i need to employ for modelling ??? 

Thanks in advance.
Sat, 12/22/2012 - 17:38 Permalink
hodaj

hi... every body

i ve modeled crack problem with ansys but i dont get good answer.now i want to model fracture problem of a multilayer bellows analysis that has crack with abaqus.

can any one help me how to start learing abaqus and model crack in it?

thanks alot.

Mon, 06/10/2013 - 09:30 Permalink
M Abdullah

Hi Hodaj

 Use can use XFEM. There is a tutorial that you can follow. Google "Matthew Pais XFEM"

I have modelled using XFEM but does anybody know how to model a crack using conventional FEM. I tried using contour integral but it does not work. When I try to create a crack using contour integral I have to select a crack front and tip, but cannot. 

Wed, 06/19/2013 - 10:20 Permalink
mokaloba

iMechanica Group.

I trust all is well with all of us. I need the following help.

I am modelling viscoelatic-viscoplatic behaviour of a (natural) short-fiber composite, the materials being chemically modified sisal fiber within a polypropylene (thermoplastic) matrix. I have done creep experiments and have lots of data (e.g fiber tensile strength, modulus, interfacial shear strength values, polymer tensile strength, poissons ratio etc, etc)   to serve s input to the model. 

Can anybody please help with specific tutorials which would be an effective, easy example to follow, and exact to the nature of my research work.

I would greatly appreciate the help. You may use teh following two email addresses (1) mokaloba [at] bobstandards.bw (mokaloba[at]bobstandards[dot]bw), or mokaloban [at] gmail.com (mokaloban[at]gmail[dot]com)

Cheers to all

Kind regards//

Ndebo

Fri, 07/12/2013 - 10:27 Permalink
Saurabh91

Hi,

i performing an analysis for fatigue life prediction in ABAQUS 6.10. But i m having some difficulties understanding the working of direct cyclic step. i dont understand that what are we supposed to write of increament size(initial?,minimum?,maximum?) do i need to know fouirier transformation? what is damage extrapolation constant? 

can anybody help me out on these things?

any suggestion is appreciated.



thanks 

Thu, 07/18/2013 - 06:56 Permalink
farshid90

I want to model underwater explosion in Abaqus. there is an example in abaqus help by the name of "9.1.3 Response of a submerged cylinder to an underwater explosion shock wave" which is very similar to what I'm trying to model. the problem is that i apply incident wave(planer/spherical/Undex) on the both structure and acoustic medium but i couldn't submit the model and it says " the model attributes wave formulation type must be set when using an incident wave interaction (Int-1 for example)" 

I wolld appreciate it if anyone could help me with this. thanks. 

Tue, 11/26/2013 - 17:19 Permalink
Biswajit Banerjee

This is in response to your e-mail.

I have never used Abaqus to run this sort of simulation. 

Also, I don't understand what you mean by "i apply incident wave(planer/spherical/Undex) on the both structure and acoustic medium".

I suggest you take your problem to your Abaqus customer support person.  If you don't have customer support, you will have to be more detailed and explicit if you expect free help from people who are not working on exactly the same problem as you.  

 

-- Biswajit

 

 

Wed, 11/27/2013 - 21:29 Permalink
alex2014

Hello
everyone. My name is Alex, I'm a doctoral student at the University of
Salamanca. I am working with an axisymmetric model, steel material. I intend to
obtain the residual stresses produced
when hits on a major load model (Tera Pascals) for a very short time
(picoseconds). The constitutive model is working: Elastic isotropic, platic
johnson-cook, eos us-up. First work with
Abaqus Explicit Abaqus and then Standart (I import tensions), but Abaqus CAE /
Standart (version 6.13.2) does not allow plastic or Johnson-cook or EOS. To get
"the spring back and therefore residual stress.

Please
could someone help?.

Thank

Regards. 

Mon, 02/24/2014 - 20:43 Permalink
p.haghdoust

Dear Colleagues 

I want to start some research on the Carbon nano - tubes.

In the begining I need to model a CNT in the ABAQUS.

I wrote a code for generating the xyz Coordinates of the atoms in a CNT.

The problem is that I can not import them in abaqus.

Does anyone has an Idea ?

Tue, 03/18/2014 - 01:21 Permalink
Frank Richter

Hello


a few selected publications on SHPB modeling, available freely:


1) in the ABAQUS manual:

Getting Started with Abaqus: Keywords Edition    
9.1 Types of problems suited for Abaqus/Explicit

Getting Started with Abaqus: Keywords Edition    
9.4 Example: stress wave propagation in a bar


2) MODELING AND EXPERIMENTAL INVESTIGATIONS OF THE SHOCK
RESPONSE OF VISCOELASTIC FOAMS
by Richard J. Deigan
Dissertation submitted to the Faculty of the Graduate School of the
University of Maryland, College Park, in partial fulfillment
of the requirements for the degree of
Doctorate of Philosophy
2007


3) 2D Hopkinson bar simulation analysis
Al 6061-T6 specimens
A. Bouamoul
DRDC Valcartier
Defence R&D Canada – Valcartier
Technical Memorandum
DRDC Valcartier TM 2004-363
March 2006


4) Anthony D. Puckett:
Thesis
Fidelity of a Finite Element Model
for Longitudinal Wave Propagation
in Thick Cylindrical Wave Guides
Los Alamos National Laboratory
LA-13753-T


5) Army Research Laboratory:
Numerical Hopkinson Bar Analysis: Uni-Axial Stress and
Planar Bar-Specimen Interface Conditions by Design
by Bazle A. Gama and John W. Gillespie, Jr.
ARL-CR-553 September 2004
prepared by
University of Delaware
Center for Composite Materials
Newark, DE 19716
under contract
DAAD19-01-2-0005


6) BAM-Dissertationsreihe, Band 116
Dipl.-Phys. Hauke Gravenkamp
Numerical methods for the simulation of ultrasonic guided waves
2014, ISBN 978-3-9816380-4-2
from:
http://www.bam.de/de/aktuell/aktuelle_meldungen/index.htm


7) find more on the Internet


Good luck

Frank

Mon, 07/28/2014 - 19:36 Permalink
Patrick Vieira

Hi everybody!

Does anyone know how can I reread the input file during the analysis and/or how can I apply boundary conditions to a new set of nodes during the analysis but I dont know this nodes before the analysis starts. I will give the new set of nodes during the analysis.

 

Rgds.,

 

Patrick Vieira

Fri, 11/28/2014 - 18:38 Permalink
majid_6

Normal
0

false
false
false

EN-US
X-NONE
AR-SA

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}

Hi

I research on buckling and postbuckling of a composite cylindrical shell with a cutout,but i do not know how define imperfection in abaqus.Can someone help me???

Thu, 04/16/2015 - 05:57 Permalink
majid_6

Hi
I research on buckling and postbuckling of a composite cylindrical shell with a cutout,but i do not know how define imperfection in abaqus.Can someone help me???

Fri, 04/17/2015 - 19:15 Permalink
EngM_ebrahimpour

Hello dears

I need your help

How can i model the beam for torsion in Abaqus software?and also how can i design and model a beam by GFRP shell whit the Abaqus software

Fri, 05/25/2018 - 20:32 Permalink
Arash_Nasiri

dear all
-Can Abaqus model the cement integrity during the curing (I need to understand how the stresses are changing and what type of forces are excreting on the casing during the curing)
-What properties should be assigned to the interface (between casing and cement/ and between the formation and cementing)
tnx

Mon, 08/10/2020 - 06:53 Permalink